L.E. Wilson167525526
L.E. Wilson S/S Bullet Seater Die W/ Micrometer Adjustment 7Mm Prc$135.52
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with Micrometer Adjustment for 300 PRC gives reloaders the precision control needed for consistent, accurate bullet seating. Built from stainless steel, this die features a micrometer-adjustable top that lets you dial in exact seating depths in 0.001" increments—critical for the kind of precision long-range and match shooting demands. Whether you're fine-tuning loads for a new 300 PRC rifle or optimizing an existing setup, this tool removes the guesswork from one of reloading's most critical steps.
The die's threaded cap design makes major adjustments straightforward and repeatable. One of the standout advantages of this arbor seater design is its portability: you can load bullets to various depths, pack the die and an arbor press, and take them to the range to test and confirm your optimal seating depth on the fly. That flexibility saves time and ammunition by cutting down on multiple trips back and forth.
Designed for use with an arbor press (not included), this L.E. Wilson die slots into any serious reloader's bench as a workhorse tool for precision ammunition. The stainless steel construction means it'll hold up through years of use without degradation, and the 0.001" micrometer increments give you the resolution you need for competitive and long-range hunting loads.
| Brand | L.E. Wilson |
| Product Type | Bullet Seater Die |
| Caliber | 300 PRC |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Adjustment Type | Micrometer with threaded cap |
| Press Type Required | Arbor Press (not included) |
This die is designed for use with an arbor press. It is not compatible with standard reloading presses.
Yes—that's one of the key advantages of the arbor seater design. You can load rounds to different seating depths and bring the die and arbor press to the range to test and confirm your optimal seating depth before finalizing your full load batch at home.
This seater die is caliber-specific for 300 PRC ammunition.
The micrometer top allows adjustments in 0.001" increments, giving you the fine control necessary for precision long-range and match-grade reloading.
SKU: 167521935 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 1.1oz
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with Micrometer Adjustment for 300 PRC gives reloaders the precision control needed for consistent, accurate bullet seating. Built from stainless steel, this die features a micrometer-adjustable top that lets you dial in exact seating depths in 0.001" increments—critical for the kind of precision long-range and match shooting demands. Whether you're fine-tuning loads for a new 300 PRC rifle or optimizing an existing setup, this tool removes the guesswork from one of reloading's most critical steps.
The die's threaded cap design makes major adjustments straightforward and repeatable. One of the standout advantages of this arbor seater design is its portability: you can load bullets to various depths, pack the die and an arbor press, and take them to the range to test and confirm your optimal seating depth on the fly. That flexibility saves time and ammunition by cutting down on multiple trips back and forth.
Designed for use with an arbor press (not included), this L.E. Wilson die slots into any serious reloader's bench as a workhorse tool for precision ammunition. The stainless steel construction means it'll hold up through years of use without degradation, and the 0.001" micrometer increments give you the resolution you need for competitive and long-range hunting loads.
| Brand | L.E. Wilson |
| Product Type | Bullet Seater Die |
| Caliber | 300 PRC |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Adjustment Type | Micrometer with threaded cap |
| Press Type Required | Arbor Press (not included) |
This die is designed for use with an arbor press. It is not compatible with standard reloading presses.
Yes—that's one of the key advantages of the arbor seater design. You can load rounds to different seating depths and bring the die and arbor press to the range to test and confirm your optimal seating depth before finalizing your full load batch at home.
This seater die is caliber-specific for 300 PRC ammunition.
The micrometer top allows adjustments in 0.001" increments, giving you the fine control necessary for precision long-range and match-grade reloading.
SKU: 167521935 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 1.1oz