Redding Reloading Equipment167528847
Redding 6.5X55Mm Swede Bullet Seating Die$146.63
Availability: In Stock
The L.E. Wilson 6.5x55mm Swede bullet seating die is a precision reloading tool built for shooters who demand consistency and accuracy in every round. If you're loading for the Swede cartridge and want to eliminate variables in bullet seating, this chamber-type seater captures and aligns both the bullet and case before seating—a design advantage that benchrest shooters have relied on for decades to produce match-grade ammunition.
What sets this seating die apart from standard 7/8-inch by 14 TPI designs is the way it works: the case and bullet are held in precise alignment within the die itself before the close-fitting seating stem pushes the bullet straight into the case mouth. That controlled geometry translates to lower runout and repeatability that shows up on target. The die body is stainless steel throughout, built to last through thousands of reloading cycles without wear or corrosion.
Setup is straightforward. Depth adjustment happens via a cap screw with 3/8-inch by 24 TPI threads, giving you fine control over bullet seating depth. The kit includes the seater die, seater base, an allen wrench for adjustments, and instructions. It's made in the USA and comes ready to mount in your press.
| Cartridge | 6.5x55mm Swede |
| Die Type | Bullet Seating Die (Chamber Type) |
| Material | Stainless Steel |
| Depth Adjustment | 3/8-inch by 24 TPI Cap Screw |
| Included Items | Seater Die, Seater Base, Allen Wrench, Instructions |
| Manufacture | USA |
A chamber-type seating die like this Wilson model holds the case and bullet in alignment within the die before seating begins. A conventional 7/8-inch by 14 TPI die does not capture and align the components the same way. This chamber design reduces bullet runout and improves consistency, which is why it's favored for precision shooting and benchrest applications.
Yes, the die mounts in any standard reloading press that accepts standard dies. It comes with a seater base and adjustment instructions to help you set it up properly.
The kit contains the seater die, seater base, an allen wrench for making adjustments, and printed instructions. You'll need your own press and standard reloading supplies to use it.
This die excels in precision reloading for target shooting and benchrest competition, where consistency and low runout directly affect accuracy. Its controlled seating design is valuable for any application where ammunition precision matters.
SKU: 194196977 • Weight: 0.95oz
Availability: In Stock
The L.E. Wilson 6.5x55mm Swede bullet seating die is a precision reloading tool built for shooters who demand consistency and accuracy in every round. If you're loading for the Swede cartridge and want to eliminate variables in bullet seating, this chamber-type seater captures and aligns both the bullet and case before seating—a design advantage that benchrest shooters have relied on for decades to produce match-grade ammunition.
What sets this seating die apart from standard 7/8-inch by 14 TPI designs is the way it works: the case and bullet are held in precise alignment within the die itself before the close-fitting seating stem pushes the bullet straight into the case mouth. That controlled geometry translates to lower runout and repeatability that shows up on target. The die body is stainless steel throughout, built to last through thousands of reloading cycles without wear or corrosion.
Setup is straightforward. Depth adjustment happens via a cap screw with 3/8-inch by 24 TPI threads, giving you fine control over bullet seating depth. The kit includes the seater die, seater base, an allen wrench for adjustments, and instructions. It's made in the USA and comes ready to mount in your press.
| Cartridge | 6.5x55mm Swede |
| Die Type | Bullet Seating Die (Chamber Type) |
| Material | Stainless Steel |
| Depth Adjustment | 3/8-inch by 24 TPI Cap Screw |
| Included Items | Seater Die, Seater Base, Allen Wrench, Instructions |
| Manufacture | USA |
A chamber-type seating die like this Wilson model holds the case and bullet in alignment within the die before seating begins. A conventional 7/8-inch by 14 TPI die does not capture and align the components the same way. This chamber design reduces bullet runout and improves consistency, which is why it's favored for precision shooting and benchrest applications.
Yes, the die mounts in any standard reloading press that accepts standard dies. It comes with a seater base and adjustment instructions to help you set it up properly.
The kit contains the seater die, seater base, an allen wrench for making adjustments, and printed instructions. You'll need your own press and standard reloading supplies to use it.
This die excels in precision reloading for target shooting and benchrest competition, where consistency and low runout directly affect accuracy. Its controlled seating design is valuable for any application where ammunition precision matters.
SKU: 194196977 • Weight: 0.95oz