J P Enterprises167528747
D2 Series Ultra Low Profile .875 Adj Gas Block W/ Detent$151.95
Availability: In Stock
The JP Enterprises D2 Series Ultra Low Profile .750 Adj Gas Block With Detent is purpose-built for AR builders who demand precision gas tuning without sacrificing handguard compatibility. This adjustable gas block fits cleanly under virtually any modern handguard—even tight-profile designs with M-LOK—while keeping weight to an absolute minimum. If you're running a short-barrel rifle, suppressed build, or barrel with unconventional dwell characteristics, the D2's fine adjustment granularity gives you the control to dial in reliable function with minimal overgassing.
The design philosophy here is genuinely different from typical gas blocks. Instead of a top-mounted adjustment knob that interferes with handguard rails and collects carbon, JP moved the adjustment mechanism to the front-facing nut. This positioning sheds fouling naturally and lets you torque down harder without worrying about trapped debris. The two-piece construction also makes installation easier, particularly if you're working with a pin-and-weld muzzle device.
Gas control is where this block earns its reputation. With 52 clicks between full open and full close—double the clicks of earlier JP detent blocks—you get the refinement needed for short-dwell or high-pressure builds where standard adjustments leave you guessing. The 5/32 hex drive and slot design means you can turn it with a standard wrench, screwdriver, or whatever's in your bag. Built from 416 stainless and finished in black, the D2 is tough enough for serious use and light enough (under 2 oz.) that it won't throw off your barrel harmonics.
| Barrel Diameter Compatibility | .750 inch |
| Material | 416 stainless steel |
| Finish | Black |
| Weight | 1.73 to 1.76 oz. |
| Length | 1.5 inches |
| Height (Overall) | 1.24 to 1.33 inches |
| Height (Over Bore) | 0.79 to 0.81 inches |
| Width | 1.17 to 1.29 inches |
| Attachment Hardware | 6-32 x 3/8 inch socket head screws; includes 5/64 x 5/16 inch roll pin for gas tube installation |
| Adjustment Drive | 5/32 inch hex or screwdriver compatible |
| Adjustment Range | 52 clicks full open to full close |
The D2 is designed for ultra-low profile clearance. It fits under most modern handguards on the market, including tight M-LOK systems. Check your specific handguard's internal dimensions, but this block's streamlined profile is built for compatibility even with minimal ground clearance.
The JP D2 Series Ultra Low Profile is designed for .750 inch barrel diameter. Do not use on barrels with different diameters.
Yes. The 52-click adjustment range is specifically optimized for short-dwell and high-pressure scenarios where standard gas blocks lack refinement. This makes it ideal for SBRs and suppressed builds where tuning is critical.
Installation requires a 5/64 inch Allen wrench or screwdriver to drive the socket head screws. Adjustment can be made with a 5/32 inch hex wrench or a standard screwdriver, so you have flexibility depending on what's available on the bench or in the field.
SKU: 194196806 • Weight: 0.39oz
Availability: In Stock
The JP Enterprises D2 Series Ultra Low Profile .750 Adj Gas Block With Detent is purpose-built for AR builders who demand precision gas tuning without sacrificing handguard compatibility. This adjustable gas block fits cleanly under virtually any modern handguard—even tight-profile designs with M-LOK—while keeping weight to an absolute minimum. If you're running a short-barrel rifle, suppressed build, or barrel with unconventional dwell characteristics, the D2's fine adjustment granularity gives you the control to dial in reliable function with minimal overgassing.
The design philosophy here is genuinely different from typical gas blocks. Instead of a top-mounted adjustment knob that interferes with handguard rails and collects carbon, JP moved the adjustment mechanism to the front-facing nut. This positioning sheds fouling naturally and lets you torque down harder without worrying about trapped debris. The two-piece construction also makes installation easier, particularly if you're working with a pin-and-weld muzzle device.
Gas control is where this block earns its reputation. With 52 clicks between full open and full close—double the clicks of earlier JP detent blocks—you get the refinement needed for short-dwell or high-pressure builds where standard adjustments leave you guessing. The 5/32 hex drive and slot design means you can turn it with a standard wrench, screwdriver, or whatever's in your bag. Built from 416 stainless and finished in black, the D2 is tough enough for serious use and light enough (under 2 oz.) that it won't throw off your barrel harmonics.
| Barrel Diameter Compatibility | .750 inch |
| Material | 416 stainless steel |
| Finish | Black |
| Weight | 1.73 to 1.76 oz. |
| Length | 1.5 inches |
| Height (Overall) | 1.24 to 1.33 inches |
| Height (Over Bore) | 0.79 to 0.81 inches |
| Width | 1.17 to 1.29 inches |
| Attachment Hardware | 6-32 x 3/8 inch socket head screws; includes 5/64 x 5/16 inch roll pin for gas tube installation |
| Adjustment Drive | 5/32 inch hex or screwdriver compatible |
| Adjustment Range | 52 clicks full open to full close |
The D2 is designed for ultra-low profile clearance. It fits under most modern handguards on the market, including tight M-LOK systems. Check your specific handguard's internal dimensions, but this block's streamlined profile is built for compatibility even with minimal ground clearance.
The JP D2 Series Ultra Low Profile is designed for .750 inch barrel diameter. Do not use on barrels with different diameters.
Yes. The 52-click adjustment range is specifically optimized for short-dwell and high-pressure scenarios where standard gas blocks lack refinement. This makes it ideal for SBRs and suppressed builds where tuning is critical.
Installation requires a 5/64 inch Allen wrench or screwdriver to drive the socket head screws. Adjustment can be made with a 5/32 inch hex wrench or a standard screwdriver, so you have flexibility depending on what's available on the bench or in the field.
SKU: 194196806 • Weight: 0.39oz