
Availability: In Stock
The Hornady Match Grade Bushing .329" is an interchangeable neck sizing bushing designed for reloaders who demand precision and control over case neck tension. This .329" bushing works with Hornady Match Grade dies to let you dial in exactly how tight your case necks fit your bullets—no more, no less. By swapping bushings instead of fighting with standard full-length dies, you avoid over-sizing your brass, which means longer case life and more rounds downrange before you need to cull your brass.
Hornady makes these bushings in .002" increments, so you can fine-tune your neck tension in small, meaningful steps. The bushing itself is self-centering, which means less hassle during setup and more consistent sizing from round to round. Whether you're running a Match Grade Full Length Die (which sizes the body and bumps the shoulder along with the neck) or a Match Grade Neck Die (neck and shoulder only), this bushing system gives you the flexibility to reload the way you want to.
If you're serious about handloading precision rifle ammo—whether for long-range hunting, PRS competition, or just the satisfaction of knowing your rounds are built right—the Match Grade bushing system is a smart investment. You get the same quality decapping hardware (self-centering spindle, o-ring tensioner, and headed decap pin) that Hornady puts in their Custom Grade dies, wrapped in a design that's built to last and deliver consistency shot after shot.
| Bushing Diameter | .329" |
| Type | Interchangeable Neck Sizing Bushing |
| Increment Options | Available in .002" increments |
| Compatibility | Hornady Match Grade dies (Full Length and Neck) |
| Decap System | Self-centering spindle with o-ring tensioner and headed decap pin |
This bushing is designed for Hornady Match Grade dies, including both the Full Length Die and the Neck Die. The bushing installs in either version to control neck sizing independently.
Bushing dies let you size the case neck to match your specific bullet diameter and desired tension, rather than forcing every case into a one-size-fits-all die. This prevents over-sizing, reduces brass work-hardening, and extends case life—especially important if you reload the same brass multiple times.
Hornady offers bushings in .002" increments. You'll typically start with a bushing that's .002" to .004" smaller than your bullet diameter to achieve proper neck tension. Many reloaders try a couple of sizes to dial in their preference.
This is the bushing alone. You'll need a Hornady Match Grade Full Length Die or Neck Die to use it. The bushing is the interchangeable component that fits into those dies.
SKU: 197558902 • Weight: 0.05oz






Availability: In Stock
The Hornady Match Grade Bushing .329" is an interchangeable neck sizing bushing designed for reloaders who demand precision and control over case neck tension. This .329" bushing works with Hornady Match Grade dies to let you dial in exactly how tight your case necks fit your bullets—no more, no less. By swapping bushings instead of fighting with standard full-length dies, you avoid over-sizing your brass, which means longer case life and more rounds downrange before you need to cull your brass.
Hornady makes these bushings in .002" increments, so you can fine-tune your neck tension in small, meaningful steps. The bushing itself is self-centering, which means less hassle during setup and more consistent sizing from round to round. Whether you're running a Match Grade Full Length Die (which sizes the body and bumps the shoulder along with the neck) or a Match Grade Neck Die (neck and shoulder only), this bushing system gives you the flexibility to reload the way you want to.
If you're serious about handloading precision rifle ammo—whether for long-range hunting, PRS competition, or just the satisfaction of knowing your rounds are built right—the Match Grade bushing system is a smart investment. You get the same quality decapping hardware (self-centering spindle, o-ring tensioner, and headed decap pin) that Hornady puts in their Custom Grade dies, wrapped in a design that's built to last and deliver consistency shot after shot.
| Bushing Diameter | .329" |
| Type | Interchangeable Neck Sizing Bushing |
| Increment Options | Available in .002" increments |
| Compatibility | Hornady Match Grade dies (Full Length and Neck) |
| Decap System | Self-centering spindle with o-ring tensioner and headed decap pin |
This bushing is designed for Hornady Match Grade dies, including both the Full Length Die and the Neck Die. The bushing installs in either version to control neck sizing independently.
Bushing dies let you size the case neck to match your specific bullet diameter and desired tension, rather than forcing every case into a one-size-fits-all die. This prevents over-sizing, reduces brass work-hardening, and extends case life—especially important if you reload the same brass multiple times.
Hornady offers bushings in .002" increments. You'll typically start with a bushing that's .002" to .004" smaller than your bullet diameter to achieve proper neck tension. Many reloaders try a couple of sizes to dial in their preference.
This is the bushing alone. You'll need a Hornady Match Grade Full Length Die or Neck Die to use it. The bushing is the interchangeable component that fits into those dies.
SKU: 197558902 • Weight: 0.05oz
