Hornady197558937
Hornady Match Grade Bushing .309"$23.55
Availability: In Stock
The Hornady Match Grade Bushing .282" is a precision neck sizing bushing designed for handloaders running Hornady Match Grade dies. If you're working with Match Grade full-length or neck-sizing dies and need to dial in consistent neck tension on your brass, this .282" bushing gives you the precise control that separates match-grade reloading from standard approaches. Hornady produces these bushings in .002" increments, so you can find the exact fit for your specific bullet and brass combination without guessing or settling for oversized necks that work-harden your cases prematurely.
The real advantage of interchangeable bushings is flexibility: once you've figured out the neck tension that works best for your rifle and ammunition, you can swap bushings to match different bullet diameters or adjust your setup without buying a whole new die. The bushing is self-centering in the die body, which means consistent, concentric neck sizing every single time you pull the handle. That consistency pays off downrange, especially if you're loading for precision rifle, long-range hunting, or competition shooting where case prep quality directly affects your groups.
These bushings work with both the Match Grade full-length die (which sizes case body and bumps shoulder) and the Match Grade neck die (neck sizing only, with shoulder bump). If you're upgrading from standard dies or building out a precision reloading setup, a .282" bushing is your starting point for dialing in neck sizing—just verify your Match Grade die is already in your press before ordering bushings.
| Brand | Hornady |
| Product Type | Neck Sizing Bushing |
| Bushing Size | .282" |
| Increment Availability | .002" increments |
| Compatibility | Hornady Match Grade Dies (Full-Length and Neck Dies) |
Yes, the .282" bushing is designed as an interchangeable component for Hornady Match Grade full-length and neck-sizing dies. Confirm you own a Match Grade die before ordering.
Interchangeable bushings let you customize neck tension to your specific brass, bullet diameter, and rifle. This prevents over-sizing, reduces case work-hardening, and allows you to adjust your setup without buying new dies. The .002" increment sizing options mean you can dial in a precise fit rather than accept a one-size-fits-most solution.
Yes. Once you own a Match Grade die, you can swap bushings to handle different bullet sizes or adjust tension. This makes the system cost-effective and flexible for handloaders working with multiple cartridges or bullet weights.
Hornady makes bushings in .002" increments across a range of sizes. If .282" isn't your exact need, Hornady offers other sizes—contact us to identify the right bushing for your reloading setup.
SKU: 197561599 • Weight: 0.01oz
Availability: In Stock
The Hornady Match Grade Bushing .282" is a precision neck sizing bushing designed for handloaders running Hornady Match Grade dies. If you're working with Match Grade full-length or neck-sizing dies and need to dial in consistent neck tension on your brass, this .282" bushing gives you the precise control that separates match-grade reloading from standard approaches. Hornady produces these bushings in .002" increments, so you can find the exact fit for your specific bullet and brass combination without guessing or settling for oversized necks that work-harden your cases prematurely.
The real advantage of interchangeable bushings is flexibility: once you've figured out the neck tension that works best for your rifle and ammunition, you can swap bushings to match different bullet diameters or adjust your setup without buying a whole new die. The bushing is self-centering in the die body, which means consistent, concentric neck sizing every single time you pull the handle. That consistency pays off downrange, especially if you're loading for precision rifle, long-range hunting, or competition shooting where case prep quality directly affects your groups.
These bushings work with both the Match Grade full-length die (which sizes case body and bumps shoulder) and the Match Grade neck die (neck sizing only, with shoulder bump). If you're upgrading from standard dies or building out a precision reloading setup, a .282" bushing is your starting point for dialing in neck sizing—just verify your Match Grade die is already in your press before ordering bushings.
| Brand | Hornady |
| Product Type | Neck Sizing Bushing |
| Bushing Size | .282" |
| Increment Availability | .002" increments |
| Compatibility | Hornady Match Grade Dies (Full-Length and Neck Dies) |
Yes, the .282" bushing is designed as an interchangeable component for Hornady Match Grade full-length and neck-sizing dies. Confirm you own a Match Grade die before ordering.
Interchangeable bushings let you customize neck tension to your specific brass, bullet diameter, and rifle. This prevents over-sizing, reduces case work-hardening, and allows you to adjust your setup without buying new dies. The .002" increment sizing options mean you can dial in a precise fit rather than accept a one-size-fits-most solution.
Yes. Once you own a Match Grade die, you can swap bushings to handle different bullet sizes or adjust tension. This makes the system cost-effective and flexible for handloaders working with multiple cartridges or bullet weights.
Hornady makes bushings in .002" increments across a range of sizes. If .282" isn't your exact need, Hornady offers other sizes—contact us to identify the right bushing for your reloading setup.
SKU: 197561599 • Weight: 0.01oz