$15.35
Loading...
Loading...
Loading...
Availability: In Stock
If you're handloading 7mm ammunition with Hornady ELD-X bullets, seating consistency directly affects accuracy and reliability. The Hornady Custom Grade New Dimension Die Seater Stem for 7mm 150 & 162 Grain ELD-X Bullets is a precision replacement seating stem engineered to match the exact profile of these specific bullet designs. Rather than forcing bullets into a generic seater, this custom-ground stem nestles each bullet to its intended depth without deformation—critical when you're chasing tight groups or building repeatable hunting loads.
Hornady's Custom Grade Dies are already known for tight tolerances, and this seater stem takes that precision further by eliminating the compromise of one-size-fits-all seating. The stem is machined to the geometry of 150-grain and 162-grain ELD-X bullets, so you get consistent, damage-free seating run after run. This is the kind of attention to detail that separates dialed-in reloads from merely acceptable ones. If you're running a Custom Grade die setup, this stem is a drop-in upgrade that pays dividends in load consistency.
A heads-up: this stem is engineered for Hornady Custom Grade Dies only and is not compatible with other manufacturers' dies. Make sure your die body is a Hornady Custom Grade before ordering. If you're already deep into precision reloading and you want seating that respects the design of your bullets, this is a worthwhile investment.
| Caliber | 7mm |
| Compatible Bullet Weights | 150 grain, 162 grain |
| Bullet Type | ELD-X |
| Compatible Dies | Hornady Custom Grade Dies only |
| Type | Seater Stem (Replacement Part) |
No. This stem is designed for Hornady Custom Grade Dies only and is not compatible with dies from other manufacturers or Hornady's standard die lines. Verify that your die body is marked as a Custom Grade Die before purchasing.
This stem is specifically machined for 150-grain and 162-grain ELD-X bullets. Using it with other bullet designs may result in improper seating or bullet damage.
This is a replacement seater stem only. You'll need an existing Hornady Custom Grade Die body to use it. It replaces the original seater stem in your die.
A custom-profiled stem seats bullets without deformation and improves consistency between rounds. This is especially valuable if you're pursuing tighter accuracy, reloading premium bullets like ELD-X, or building ammunition for precision hunting or target shooting.
SKU: 115815680 • Width: 1.8in • Height: 0.7in • Depth: 3.2in • Weight: 0.03oz
Availability: In Stock
If you're handloading 7mm ammunition with Hornady ELD-X bullets, seating consistency directly affects accuracy and reliability. The Hornady Custom Grade New Dimension Die Seater Stem for 7mm 150 & 162 Grain ELD-X Bullets is a precision replacement seating stem engineered to match the exact profile of these specific bullet designs. Rather than forcing bullets into a generic seater, this custom-ground stem nestles each bullet to its intended depth without deformation—critical when you're chasing tight groups or building repeatable hunting loads.
Hornady's Custom Grade Dies are already known for tight tolerances, and this seater stem takes that precision further by eliminating the compromise of one-size-fits-all seating. The stem is machined to the geometry of 150-grain and 162-grain ELD-X bullets, so you get consistent, damage-free seating run after run. This is the kind of attention to detail that separates dialed-in reloads from merely acceptable ones. If you're running a Custom Grade die setup, this stem is a drop-in upgrade that pays dividends in load consistency.
A heads-up: this stem is engineered for Hornady Custom Grade Dies only and is not compatible with other manufacturers' dies. Make sure your die body is a Hornady Custom Grade before ordering. If you're already deep into precision reloading and you want seating that respects the design of your bullets, this is a worthwhile investment.
| Caliber | 7mm |
| Compatible Bullet Weights | 150 grain, 162 grain |
| Bullet Type | ELD-X |
| Compatible Dies | Hornady Custom Grade Dies only |
| Type | Seater Stem (Replacement Part) |
No. This stem is designed for Hornady Custom Grade Dies only and is not compatible with dies from other manufacturers or Hornady's standard die lines. Verify that your die body is marked as a Custom Grade Die before purchasing.
This stem is specifically machined for 150-grain and 162-grain ELD-X bullets. Using it with other bullet designs may result in improper seating or bullet damage.
This is a replacement seater stem only. You'll need an existing Hornady Custom Grade Die body to use it. It replaces the original seater stem in your die.
A custom-profiled stem seats bullets without deformation and improves consistency between rounds. This is especially valuable if you're pursuing tighter accuracy, reloading premium bullets like ELD-X, or building ammunition for precision hunting or target shooting.
SKU: 115815680 • Width: 1.8in • Height: 0.7in • Depth: 3.2in • Weight: 0.03oz