Loading...
Loading...
Loading...
Availability: In Stock
The Hornady Custom Grade New Dimension Die Seater Stem for 30 Caliber 212 Grain ELD-X Bullets is a precision replacement component engineered for reloaders who demand consistency and bullet integrity. This seater stem is machined to match the exact profile of the 30 caliber 212 grain ELD-X bullet, ensuring repeatable, damage-free seating every time you run a round through your press. Whether you're fine-tuning handloads for long-range hunting or maximizing accuracy at the range, a properly fitted seater stem is critical to bullet performance—and Hornady's Custom Grade dies are built on the principle that one-size-fits-all approaches cost you precision.
Reloaders often overlook the seater stem, but it's where theory meets practice: a stem mismatched to your bullet's geometry can cause runout, deformation, or inconsistent seating depth, any of which will affect downrange performance. This stem fits exclusively within Hornady Custom Grade Dies, allowing you to swap stems and adapt your setup for different bullets without replacing the entire die assembly. If you're building a serious handload for the 30 caliber platform—whether that's .308 Winchester, .300 Win Mag, .300 PRC, or another cartridge—having the correct stem on hand means you can work with confidence and repeatability.
This is a component for the methodical reloader—someone who understands that ammunition quality starts with the right tools and the discipline to use them correctly. Hornady's Custom Grade New Dimension line reflects that philosophy, delivering machine work and tolerances that support your reloading ambitions rather than limiting them.
| Caliber | 30 Caliber |
| Bullet Weight | 212 Grain |
| Bullet Type | ELD-X |
| Manufacturer | Hornady |
| Compatibility | Hornady Custom Grade Dies only |
No. This stem is designed for Hornady Custom Grade Dies and is not compatible with other manufacturers' dies or Hornady's other die lines. Confirm your die brand and series before ordering.
This stem is machined specifically for the 30 caliber 212 grain ELD-X bullet profile. Using it with bullets of different weights, designs, or manufacturers may result in poor seating or bullet damage. Hornady offers stems matched to other 30 caliber bullets; verify your bullet specs before purchasing.
This stem will work with any 30 caliber cartridge (.308 Winchester, .300 Win Mag, .300 PRC, etc.) as long as you're using Hornady Custom Grade Dies and loading 212 grain ELD-X bullets. The cartridge itself doesn't determine stem compatibility—the bullet profile does.
This is a replacement seater stem component only. You'll need a Hornady Custom Grade Die body (seating die) to use it. It's sold as a standalone part for reloaders who already have the die assembly and need to swap stems for different bullet specifications.
SKU: 115730663 • Width: 3.1in • Height: 1in • Depth: 12.2in • Weight: 0.05oz
Availability: In Stock
The Hornady Custom Grade New Dimension Die Seater Stem for 30 Caliber 212 Grain ELD-X Bullets is a precision replacement component engineered for reloaders who demand consistency and bullet integrity. This seater stem is machined to match the exact profile of the 30 caliber 212 grain ELD-X bullet, ensuring repeatable, damage-free seating every time you run a round through your press. Whether you're fine-tuning handloads for long-range hunting or maximizing accuracy at the range, a properly fitted seater stem is critical to bullet performance—and Hornady's Custom Grade dies are built on the principle that one-size-fits-all approaches cost you precision.
Reloaders often overlook the seater stem, but it's where theory meets practice: a stem mismatched to your bullet's geometry can cause runout, deformation, or inconsistent seating depth, any of which will affect downrange performance. This stem fits exclusively within Hornady Custom Grade Dies, allowing you to swap stems and adapt your setup for different bullets without replacing the entire die assembly. If you're building a serious handload for the 30 caliber platform—whether that's .308 Winchester, .300 Win Mag, .300 PRC, or another cartridge—having the correct stem on hand means you can work with confidence and repeatability.
This is a component for the methodical reloader—someone who understands that ammunition quality starts with the right tools and the discipline to use them correctly. Hornady's Custom Grade New Dimension line reflects that philosophy, delivering machine work and tolerances that support your reloading ambitions rather than limiting them.
| Caliber | 30 Caliber |
| Bullet Weight | 212 Grain |
| Bullet Type | ELD-X |
| Manufacturer | Hornady |
| Compatibility | Hornady Custom Grade Dies only |
No. This stem is designed for Hornady Custom Grade Dies and is not compatible with other manufacturers' dies or Hornady's other die lines. Confirm your die brand and series before ordering.
This stem is machined specifically for the 30 caliber 212 grain ELD-X bullet profile. Using it with bullets of different weights, designs, or manufacturers may result in poor seating or bullet damage. Hornady offers stems matched to other 30 caliber bullets; verify your bullet specs before purchasing.
This stem will work with any 30 caliber cartridge (.308 Winchester, .300 Win Mag, .300 PRC, etc.) as long as you're using Hornady Custom Grade Dies and loading 212 grain ELD-X bullets. The cartridge itself doesn't determine stem compatibility—the bullet profile does.
This is a replacement seater stem component only. You'll need a Hornady Custom Grade Die body (seating die) to use it. It's sold as a standalone part for reloaders who already have the die assembly and need to swap stems for different bullet specifications.
SKU: 115730663 • Width: 3.1in • Height: 1in • Depth: 12.2in • Weight: 0.05oz