Hornady115827879
Hornady Custom Grade New Dimension Die Seater Stem - 25 Caliber, 134 Grain ELD Match$14.83
Availability: In Stock
The Hornady Custom Grade New Dimension Die Seater Stem for 6.5mm 143gr ELD-X & 147gr ELD Match is a precision replacement component engineered for reloaders who demand consistency with Hornady's premium ELD (Extremely Low Drag) bullet lineup. This seater stem is machined to match the exact profile of these two high-ballistic-coefficient projectiles, enabling you to seat them with minimal runout and maximum repeatability in your Hornady Custom-Grade dies. Whether you're loading for long-range hunting with the 143-grain ELD-X or precision competition shooting with the 147-grain ELD Match, this stem takes the guesswork out of bullet seating depth and concentricity.
Reloaders know that seating is one of the most critical steps in the handload process—even small variations in bullet runout can shift point of impact and degrade accuracy downrange. Hornady's custom-profiled stems eliminate the fit gaps you get with generic seating dies, letting you achieve the tight tolerances modern match-grade and long-range ammunition demands. This stem fits only Hornady Custom-Grade New Dimension dies, ensuring a perfect mechanical interface and consistent results shot after shot.
If you're already invested in Hornady's Custom-Grade die system and regularly load these two popular 6.5mm bullets, this stem is a straightforward way to optimize your press setup. Keep one handy for quick cartridge switching, or stock extras to support a multi-caliber reloading bench.
| Caliber | 6.5mm |
| Bullet Type | 143gr ELD-X, 147gr ELD Match |
| Compatibility | Hornady Custom-Grade New Dimension Dies |
| Type | Seater Stem (Replacement) |
No. This stem is designed exclusively for Hornady Custom-Grade New Dimension dies and is not compatible with other brands or die types.
This stem is machined to fit the specific profile of these two bullet models. Using it with different projectiles may result in inconsistent seating. Contact Hornady for compatibility with other 6.5mm bullets.
You receive the replacement seater stem only. It is a direct replacement component for your existing Hornady Custom-Grade die.
The stem screws into the seating die assembly. If you already own a Hornady Custom-Grade New Dimension die for 6.5mm, no additional parts are required.
SKU: 115684787 • Width: 1.9in • Height: 0.3in • Depth: 3.1in • Weight: 0.02oz
Availability: In Stock
The Hornady Custom Grade New Dimension Die Seater Stem for 6.5mm 143gr ELD-X & 147gr ELD Match is a precision replacement component engineered for reloaders who demand consistency with Hornady's premium ELD (Extremely Low Drag) bullet lineup. This seater stem is machined to match the exact profile of these two high-ballistic-coefficient projectiles, enabling you to seat them with minimal runout and maximum repeatability in your Hornady Custom-Grade dies. Whether you're loading for long-range hunting with the 143-grain ELD-X or precision competition shooting with the 147-grain ELD Match, this stem takes the guesswork out of bullet seating depth and concentricity.
Reloaders know that seating is one of the most critical steps in the handload process—even small variations in bullet runout can shift point of impact and degrade accuracy downrange. Hornady's custom-profiled stems eliminate the fit gaps you get with generic seating dies, letting you achieve the tight tolerances modern match-grade and long-range ammunition demands. This stem fits only Hornady Custom-Grade New Dimension dies, ensuring a perfect mechanical interface and consistent results shot after shot.
If you're already invested in Hornady's Custom-Grade die system and regularly load these two popular 6.5mm bullets, this stem is a straightforward way to optimize your press setup. Keep one handy for quick cartridge switching, or stock extras to support a multi-caliber reloading bench.
| Caliber | 6.5mm |
| Bullet Type | 143gr ELD-X, 147gr ELD Match |
| Compatibility | Hornady Custom-Grade New Dimension Dies |
| Type | Seater Stem (Replacement) |
No. This stem is designed exclusively for Hornady Custom-Grade New Dimension dies and is not compatible with other brands or die types.
This stem is machined to fit the specific profile of these two bullet models. Using it with different projectiles may result in inconsistent seating. Contact Hornady for compatibility with other 6.5mm bullets.
You receive the replacement seater stem only. It is a direct replacement component for your existing Hornady Custom-Grade die.
The stem screws into the seating die assembly. If you already own a Hornady Custom-Grade New Dimension die for 6.5mm, no additional parts are required.
SKU: 115684787 • Width: 1.9in • Height: 0.3in • Depth: 3.1in • Weight: 0.02oz