Griffin Armament126512096
GRIFFIN Dual-Lok EZ Brake 9mm 1/2x28 Muzzle Device$90.20
Availability: In Stock
The Griffin EZ Brake in 9mm 1/2x28 is a lightweight muzzle device built for shooters running Griffin Taper Mount suppressors or planning to add one down the road. Machined from 17-4 PH stainless steel and finished in black nitride, this brake delivers effective recoil mitigation through six radial slots—no timing required. At just 2.0 ounces, it's engineered to keep your suppressor system light and your barrel responsive, making it an ideal choice for 9mm pistol-caliber carbines, short-barreled rifles, and defensive builds where weight matters.
The Taper Mount interface ensures a solid, repeatable lockup with minimal point-of-impact shift when you thread on a suppressor. Installation is straightforward: the brake accepts a standard 13/16-inch socket wrench, and the taper design handles alignment automatically—no fiddling with timing required. If you're not ready for a can yet, a Griffin Taper Mount Thread Protector will keep your threads clean and protected until you are.
Griffin Armament's EZ Brake is compatible with RECCE, PALADIN Sportsman, Optimus, and Bushwhacker series silencers; Revolution and Resistance series cans can be adapted with appropriate mounting hardware. Whether you're building a suppressed home-defense carbine, a quiet range gun, or a hunting rig, this brake gives you a solid foundation without unnecessary weight.
| Caliber | 9mm |
| Thread Pattern | 1/2x28 |
| Interface | Griffin Taper Mount |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride |
| Weight | 2.0 oz |
| Overall Length | 1.4 inches |
| Taper Diameter | 1.075 inches |
| Unit Diameter | 0.93 inches |
The EZ Brake is compatible with Griffin's RECCE, PALADIN Sportsman, Optimus, and Bushwhacker series silencers via the Taper Mount interface. Revolution and Resistance series suppressors can be adapted with appropriate mounting hardware.
No. The Taper Mount design auto-aligns, so there's no timing required. Just thread it on and you're done.
Yes. At 2.0 ounces, it's one of the lightest Taper Mount options available and keeps your overall suppressor system weight down while maintaining barrel responsiveness.
A standard 13/16-inch socket wrench is all you need for installation.
SKU: 115681656 • Weight: 0.3oz
Availability: In Stock
The Griffin EZ Brake in 9mm 1/2x28 is a lightweight muzzle device built for shooters running Griffin Taper Mount suppressors or planning to add one down the road. Machined from 17-4 PH stainless steel and finished in black nitride, this brake delivers effective recoil mitigation through six radial slots—no timing required. At just 2.0 ounces, it's engineered to keep your suppressor system light and your barrel responsive, making it an ideal choice for 9mm pistol-caliber carbines, short-barreled rifles, and defensive builds where weight matters.
The Taper Mount interface ensures a solid, repeatable lockup with minimal point-of-impact shift when you thread on a suppressor. Installation is straightforward: the brake accepts a standard 13/16-inch socket wrench, and the taper design handles alignment automatically—no fiddling with timing required. If you're not ready for a can yet, a Griffin Taper Mount Thread Protector will keep your threads clean and protected until you are.
Griffin Armament's EZ Brake is compatible with RECCE, PALADIN Sportsman, Optimus, and Bushwhacker series silencers; Revolution and Resistance series cans can be adapted with appropriate mounting hardware. Whether you're building a suppressed home-defense carbine, a quiet range gun, or a hunting rig, this brake gives you a solid foundation without unnecessary weight.
| Caliber | 9mm |
| Thread Pattern | 1/2x28 |
| Interface | Griffin Taper Mount |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride |
| Weight | 2.0 oz |
| Overall Length | 1.4 inches |
| Taper Diameter | 1.075 inches |
| Unit Diameter | 0.93 inches |
The EZ Brake is compatible with Griffin's RECCE, PALADIN Sportsman, Optimus, and Bushwhacker series silencers via the Taper Mount interface. Revolution and Resistance series suppressors can be adapted with appropriate mounting hardware.
No. The Taper Mount design auto-aligns, so there's no timing required. Just thread it on and you're done.
Yes. At 2.0 ounces, it's one of the lightest Taper Mount options available and keeps your overall suppressor system weight down while maintaining barrel responsiveness.
A standard 13/16-inch socket wrench is all you need for installation.
SKU: 115681656 • Weight: 0.3oz