Griffin Armament126513535
GRIFFIN DUAL-LOK EZ BRAKE 30CAL M13X.75 - Precision Muzzle Device for Enhanced Recoil Control$90.20
Loading...
Loading...
Loading...
Availability: In Stock
The Griffin Armament EZ Brake is a lightweight 30-caliber muzzle device built for shooters running Griffin Taper Mount suppressors. Machined from 17-4 PH stainless steel and finished in black nitride, this 2.0-ounce brake slots into Griffin's modular suppressor mounting ecosystem without requiring timing—just torque it down with a standard 13/16-inch socket wrench. If you're building a .30 cal rifle that will eventually wear a can, or you want recoil management without the complexity of a traditional brake, the EZ Brake delivers both in a compact, corrosion-resistant package that keeps your overall suppressor system light.
The six radial slots work to mitigate recoil while the Taper Mount interface ensures rock-solid lockup with minimal point-of-impact shift. That repeatable POI stability matters when you're dialing in a scope or trusting your rifle at distance. Because it's a Griffin Taper Mount design, the EZ Brake is compatible with the RECCE, Paladin, EXPLORR, Sportsman, Optimus, and Bushwhacker series silencers—and with appropriate adapters, it'll work with Revolution and Resistance series cans as well.
Whether you're a hunter planning a suppressor-ready build, a range shooter who values a modular setup, or someone who appreciates solid engineering and low weight, the EZ Brake is a no-fuss option that plays well with Griffin's ecosystem. The thread protector is sold separately if you want to keep those threads clean between suppressor changes.
| Caliber | 30 CAL |
| Thread Pattern | M13x0.75 |
| Taper Diameter | 1.075 inches |
| Unit Diameter | 0.93 inches |
| Overall Length | 1.4 inches |
| Weight | 2.0 ounces |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride |
| Mounting Interface | Griffin Taper Mount |
Yes, it's compatible with Griffin's RECCE, Paladin, EXPLORR, Sportsman, Optimus, and Bushwhacker series silencers. Revolution and Resistance series suppressors will work with appropriate adapters.
No. The EZ Brake does not require timing, which simplifies installation and makes it a straightforward swap or initial build component.
The EZ Brake is threaded for M13x0.75, which is the standard Griffin Taper Mount thread pattern for 30-caliber rifles.
The thread protector is sold separately. Griffin offers a compatible Taper Mount Thread Protector if you want protection for the threads when the suppressor is not mounted.
SKU: 126512097 • Weight: 0.2oz
Availability: In Stock
The Griffin Armament EZ Brake is a lightweight 30-caliber muzzle device built for shooters running Griffin Taper Mount suppressors. Machined from 17-4 PH stainless steel and finished in black nitride, this 2.0-ounce brake slots into Griffin's modular suppressor mounting ecosystem without requiring timing—just torque it down with a standard 13/16-inch socket wrench. If you're building a .30 cal rifle that will eventually wear a can, or you want recoil management without the complexity of a traditional brake, the EZ Brake delivers both in a compact, corrosion-resistant package that keeps your overall suppressor system light.
The six radial slots work to mitigate recoil while the Taper Mount interface ensures rock-solid lockup with minimal point-of-impact shift. That repeatable POI stability matters when you're dialing in a scope or trusting your rifle at distance. Because it's a Griffin Taper Mount design, the EZ Brake is compatible with the RECCE, Paladin, EXPLORR, Sportsman, Optimus, and Bushwhacker series silencers—and with appropriate adapters, it'll work with Revolution and Resistance series cans as well.
Whether you're a hunter planning a suppressor-ready build, a range shooter who values a modular setup, or someone who appreciates solid engineering and low weight, the EZ Brake is a no-fuss option that plays well with Griffin's ecosystem. The thread protector is sold separately if you want to keep those threads clean between suppressor changes.
| Caliber | 30 CAL |
| Thread Pattern | M13x0.75 |
| Taper Diameter | 1.075 inches |
| Unit Diameter | 0.93 inches |
| Overall Length | 1.4 inches |
| Weight | 2.0 ounces |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride |
| Mounting Interface | Griffin Taper Mount |
Yes, it's compatible with Griffin's RECCE, Paladin, EXPLORR, Sportsman, Optimus, and Bushwhacker series silencers. Revolution and Resistance series suppressors will work with appropriate adapters.
No. The EZ Brake does not require timing, which simplifies installation and makes it a straightforward swap or initial build component.
The EZ Brake is threaded for M13x0.75, which is the standard Griffin Taper Mount thread pattern for 30-caliber rifles.
The thread protector is sold separately. Griffin offers a compatible Taper Mount Thread Protector if you want protection for the threads when the suppressor is not mounted.
SKU: 126512097 • Weight: 0.2oz