Forster167522548
Forster 7 Prc Bushing Full Length Sizer Die$101.40
Availability: In Stock
The Forster Bushing Full Length Sizer Die Kit brings bench-tested precision to your 7 PRC and Dasher reloading. If you're building ammo for long-range hunting or target shooting and want repeatable neck tension without over-working your brass, this die system lets you dial in exactly how much grip your case neck applies to each bullet. Unlike standard full-length dies that resize the entire neck uniformly, the bushing approach gives you three different bushing options—308, 310, and 312—so you can find the sweet spot for your specific brass and bullets.
Precision reloaders know that case life and accuracy live or die on neck tension. Too little, and bullets rattle; too much, and you're fatiguing brass prematurely. The Forster bushing system sizes the body and bumps the shoulder to SAAMI minimum chamber specs while the interchangeable bushings control how much the neck is resized. Swap bushings to match your brass lot, your bullet diameter, and your chamber—a level of tuning that standard dies simply don't offer.
This is the kind of tool that pays for itself when you're forming expensive 7 PRC or Dasher brass and expect to reload it five, six, or more times. You get longer case life, tighter velocity spreads, and the kind of consistency that matters when you're dialing in a long-range rig or chasing small groups on the bench.
| Brand | Forster Products |
| Die Type | Bushing Full Length Sizer Die |
| Cartridge | 7 PRC / Dasher |
| Included Bushings | 308, 310, 312 |
A standard die resizes the entire neck in one fixed dimension. A bushing die lets you swap interchangeable bushings to adjust neck sizing tension independently of body and shoulder sizing. This means you can fine-tune how much the case neck grips your bullet without changing the overall sizing pressure of the die.
The kit includes three bushings—308, 310, and 312—to cover different brass and bullet combinations. Start with the size closest to your fired case neck diameter and work down if needed. The correct bushing will grip your bullet firmly without over-sizing.
We don't have information on press compatibility in our specs. Contact Forster directly or check the die packaging to confirm fit with your specific press and setup.
You receive the bushing full-length sizer die and three interchangeable bushings: 308, 310, and 312. Additional bushings can be ordered separately if you want to expand your tuning options.
SKU: 167525229 • Width: 2in • Height: 2in • Depth: 7in • Weight: 0.59oz
Availability: In Stock
The Forster Bushing Full Length Sizer Die Kit brings bench-tested precision to your 7 PRC and Dasher reloading. If you're building ammo for long-range hunting or target shooting and want repeatable neck tension without over-working your brass, this die system lets you dial in exactly how much grip your case neck applies to each bullet. Unlike standard full-length dies that resize the entire neck uniformly, the bushing approach gives you three different bushing options—308, 310, and 312—so you can find the sweet spot for your specific brass and bullets.
Precision reloaders know that case life and accuracy live or die on neck tension. Too little, and bullets rattle; too much, and you're fatiguing brass prematurely. The Forster bushing system sizes the body and bumps the shoulder to SAAMI minimum chamber specs while the interchangeable bushings control how much the neck is resized. Swap bushings to match your brass lot, your bullet diameter, and your chamber—a level of tuning that standard dies simply don't offer.
This is the kind of tool that pays for itself when you're forming expensive 7 PRC or Dasher brass and expect to reload it five, six, or more times. You get longer case life, tighter velocity spreads, and the kind of consistency that matters when you're dialing in a long-range rig or chasing small groups on the bench.
| Brand | Forster Products |
| Die Type | Bushing Full Length Sizer Die |
| Cartridge | 7 PRC / Dasher |
| Included Bushings | 308, 310, 312 |
A standard die resizes the entire neck in one fixed dimension. A bushing die lets you swap interchangeable bushings to adjust neck sizing tension independently of body and shoulder sizing. This means you can fine-tune how much the case neck grips your bullet without changing the overall sizing pressure of the die.
The kit includes three bushings—308, 310, and 312—to cover different brass and bullet combinations. Start with the size closest to your fired case neck diameter and work down if needed. The correct bushing will grip your bullet firmly without over-sizing.
We don't have information on press compatibility in our specs. Contact Forster directly or check the die packaging to confirm fit with your specific press and setup.
You receive the bushing full-length sizer die and three interchangeable bushings: 308, 310, and 312. Additional bushings can be ordered separately if you want to expand your tuning options.
SKU: 167525229 • Width: 2in • Height: 2in • Depth: 7in • Weight: 0.59oz