$134.73
Availability: In Stock
The Forster 6.5 PRC bushing full length sizer die kit brings precision reloading control to your workflow. If you're chasing accuracy in 6.5 PRC and want to extend brass life without sacrificing performance, this die system lets you dial in exactly how much neck tension your setup needs. The bushing approach gives you fine-grained control over sizing—something shooters who care about consistency demand but most standard dies can't deliver.
What makes this different: traditional full length dies size your whole case in one pass, but they can't adjust how much the neck gets worked. The Forster bushing system lets the bushing handle just the neck while the die body sizes the shoulder and cases wall. That separation matters. Your neck gets sized only enough to grip the new bullet firmly, without the over-working that burns brass out faster. Meanwhile, the shoulder and body are bumped back just enough to chamber reliably in a minimum-sized SAAMI chamber. You get more rounds per case before retirement, and that adds up if you're loading in quantity.
The kit ships with three bushings—288, 290, and 292—so you can find the fit that works best for your brass and bullets. Start with one, test fit and feel, then swap if needed. It's the kind of tuning that separates a die kit from a tool that actually fits your reloading philosophy.
| Cartridge | 6.5 PRC |
| Die Type | Bushing Full Length Sizer |
| Bushings Included | 288, 290, 292 |
| Manufacturer | Forster |
The kit includes one bushing full length sizer die for 6.5 PRC and three interchangeable bushings: 288, 290, and 292. You can swap bushings to find the exact neck tension that works best for your brass and bullet combination.
Each bushing provides a different amount of neck tension. Start with one size, load a round, and test how the bullet fits—it should have firm, consistent runout but not be forced. If you need tighter or looser tension, try the next bushing size. This allows you to optimize for your specific brass and reloading setup.
A bushing sizer separates neck sizing from body and shoulder sizing, giving you independent control over neck tension. This reduces unnecessary brass work and extends case life. Standard dies size the entire case uniformly, which often over-works the neck. The Forster system lets you size only as much as you need.
This die is sized for the 6.5 PRC cartridge and is designed to work with standard reloading presses that accept standard die threads. Verify your press accepts standard dies before ordering.
SKU: 167522547 • Width: 1.8in • Height: 1.75in • Depth: 6.8in • Weight: 0.6oz
Availability: In Stock
The Forster 6.5 PRC bushing full length sizer die kit brings precision reloading control to your workflow. If you're chasing accuracy in 6.5 PRC and want to extend brass life without sacrificing performance, this die system lets you dial in exactly how much neck tension your setup needs. The bushing approach gives you fine-grained control over sizing—something shooters who care about consistency demand but most standard dies can't deliver.
What makes this different: traditional full length dies size your whole case in one pass, but they can't adjust how much the neck gets worked. The Forster bushing system lets the bushing handle just the neck while the die body sizes the shoulder and cases wall. That separation matters. Your neck gets sized only enough to grip the new bullet firmly, without the over-working that burns brass out faster. Meanwhile, the shoulder and body are bumped back just enough to chamber reliably in a minimum-sized SAAMI chamber. You get more rounds per case before retirement, and that adds up if you're loading in quantity.
The kit ships with three bushings—288, 290, and 292—so you can find the fit that works best for your brass and bullets. Start with one, test fit and feel, then swap if needed. It's the kind of tuning that separates a die kit from a tool that actually fits your reloading philosophy.
| Cartridge | 6.5 PRC |
| Die Type | Bushing Full Length Sizer |
| Bushings Included | 288, 290, 292 |
| Manufacturer | Forster |
The kit includes one bushing full length sizer die for 6.5 PRC and three interchangeable bushings: 288, 290, and 292. You can swap bushings to find the exact neck tension that works best for your brass and bullet combination.
Each bushing provides a different amount of neck tension. Start with one size, load a round, and test how the bullet fits—it should have firm, consistent runout but not be forced. If you need tighter or looser tension, try the next bushing size. This allows you to optimize for your specific brass and reloading setup.
A bushing sizer separates neck sizing from body and shoulder sizing, giving you independent control over neck tension. This reduces unnecessary brass work and extends case life. Standard dies size the entire case uniformly, which often over-works the neck. The Forster system lets you size only as much as you need.
This die is sized for the 6.5 PRC cartridge and is designed to work with standard reloading presses that accept standard die threads. Verify your press accepts standard dies before ordering.
SKU: 167522547 • Width: 1.8in • Height: 1.75in • Depth: 6.8in • Weight: 0.6oz