$121.54
Availability: In Stock
The Forster Products Ultra Micrometer Seater Die for 6mm Creedmoor gives precision reloaders the edge when fine-tuning bullet seating depth. This micrometer seater die combines the proven design of Forster's Bench Rest seater with an ultra-precise micrometer adjustment system, letting you dial in bullet seating to .0005 to .001 inch increments. Whether you're chasing tight groups at the range or loading for a hunting rifle that demands consistency, the ability to record and repeat exact seating depths—and easily dial back when switching bullets—saves time and guesswork on the bench.
Built from premium steel and hand-polished before and after heat-treating, every Forster die is engineered to hold tight tolerances and produce concentric rounds load after load. The signature Forster Cross Bolt Die Locking Ring secures the die body with tension applied to both ends of the split ring, not a screw threaded into the die itself—a design detail that protects the die's threads and contributes to the rock-solid consistency Forster dies are known for.
If you're serious about 6mm Creedmoor accuracy—whether for competition, long-range hunting, or precision rifle work—this micrometer seater is the tool that turns fine-tuning from trial-and-error into science. Record your best seating depths and return to them instantly, or experiment confidently knowing you can dial right back to your proven load.
| Cartridge | 6mm Creedmoor |
| Die Type | Seating Die (Ultra Micrometer) |
| Micrometer Adjustment Range | .0005 to .001 inch increments |
| Manufacturer | Forster Products Inc |
| Model Number | U00039 |
A micrometer seater die gives you precise, repeatable control over how deep a bullet seats into a case. Instead of adjusting by feel or guessing, you dial in exact measurements and record them. This is essential for accuracy work, especially in precision rifle and competition reloading where seating depth directly affects velocity and group size.
Yes. This die is designed for 6mm Creedmoor cases and standard rifle reloading presses that accept standard die threads. It works with any 6mm Creedmoor case, bullet, and powder combination suitable for that cartridge.
The micrometer dial allows you to record your seating depth (in .0005 to .001 inch increments) for each bullet. When you switch to a different bullet, you simply dial the micrometer back to your recorded setting rather than re-adjusting by trial and error.
We've provided the facts specific to the die itself. For details on what components, adapters, or accessories ship with this die, please contact us directly or check the manufacturer's packaging specs.
SKU: 115798901 • Width: 1.9in • Height: 1.7in • Depth: 6.7in • Weight: 0.6oz
Availability: In Stock
The Forster Products Ultra Micrometer Seater Die for 6mm Creedmoor gives precision reloaders the edge when fine-tuning bullet seating depth. This micrometer seater die combines the proven design of Forster's Bench Rest seater with an ultra-precise micrometer adjustment system, letting you dial in bullet seating to .0005 to .001 inch increments. Whether you're chasing tight groups at the range or loading for a hunting rifle that demands consistency, the ability to record and repeat exact seating depths—and easily dial back when switching bullets—saves time and guesswork on the bench.
Built from premium steel and hand-polished before and after heat-treating, every Forster die is engineered to hold tight tolerances and produce concentric rounds load after load. The signature Forster Cross Bolt Die Locking Ring secures the die body with tension applied to both ends of the split ring, not a screw threaded into the die itself—a design detail that protects the die's threads and contributes to the rock-solid consistency Forster dies are known for.
If you're serious about 6mm Creedmoor accuracy—whether for competition, long-range hunting, or precision rifle work—this micrometer seater is the tool that turns fine-tuning from trial-and-error into science. Record your best seating depths and return to them instantly, or experiment confidently knowing you can dial right back to your proven load.
| Cartridge | 6mm Creedmoor |
| Die Type | Seating Die (Ultra Micrometer) |
| Micrometer Adjustment Range | .0005 to .001 inch increments |
| Manufacturer | Forster Products Inc |
| Model Number | U00039 |
A micrometer seater die gives you precise, repeatable control over how deep a bullet seats into a case. Instead of adjusting by feel or guessing, you dial in exact measurements and record them. This is essential for accuracy work, especially in precision rifle and competition reloading where seating depth directly affects velocity and group size.
Yes. This die is designed for 6mm Creedmoor cases and standard rifle reloading presses that accept standard die threads. It works with any 6mm Creedmoor case, bullet, and powder combination suitable for that cartridge.
The micrometer dial allows you to record your seating depth (in .0005 to .001 inch increments) for each bullet. When you switch to a different bullet, you simply dial the micrometer back to your recorded setting rather than re-adjusting by trial and error.
We've provided the facts specific to the die itself. For details on what components, adapters, or accessories ship with this die, please contact us directly or check the manufacturer's packaging specs.
SKU: 115798901 • Width: 1.9in • Height: 1.7in • Depth: 6.7in • Weight: 0.6oz