Forster115833642
Forster Products Inc U00058 Ultra Micrometer Seater Die 6.5 PRC$121.54
Availability: In Stock
The Forster Products Ultra Micrometer Seater Die for 6.5 Grendel brings competition-grade precision to your handloading bench. Built for reloaders who refuse to settle for guesswork, this micrometer seater die lets you dial in bullet seating depth with repeatable accuracy—critical for consistent velocities, tight groups, and reliable performance whether you're building match rounds or hunting loads. The micrometer adjustment system makes it simple to record your ideal seating depth and return to it every time, and switching between different bullet profiles is as straightforward as turning the dial back to your saved setting.
Forster's reputation in precision reloading stems from meticulous manufacturing: each die is machined from quality steel to exacting tolerances, hand polished before and after heat-treating, and finished to a fine surface that resists wear. The Cross Bolt Die Locking Ring—a Forster signature—tightens both ends of the split ring body rather than applying torque directly to the die threads, distributing clamping force more evenly and protecting the die's precision geometry over thousands of rounds.
The micrometer head allows bullet seating depth adjustments in increments as fine as .0005 inch to .001 inch, giving you the control needed to fine-tune concentricity and bullet jump. This level of precision is especially valuable when you're optimizing loads for specific rifles or experimenting with seating depth to maximize accuracy. Whether you're a benchrest competitor, a precision hunter dialing in a new wildcat, or a serious handloader who values consistency, this die rewards attention to detail.
| Product | Forster Ultra Micrometer Seater Die |
| Caliber | 6.5 Grendel |
| Part Number | U00059 |
| Micrometer Adjustment Range | .0005–.001 inch increments |
| Die Body Material | Heat-treated steel, hand-polished |
| Locking Mechanism | Cross Bolt Die Locking Ring |
The micrometer allows adjustments in increments as fine as .0005 inch to .001 inch, giving you control down to a tenth of a thousandth of an inch. This precision is ideal for optimizing bullet seating depth to reduce variance and improve group consistency.
Yes. The micrometer dial is marked so you can record your ideal seating depth setting for a specific bullet profile. When you switch bullets, you simply dial the micrometer back to your recorded number—no need to reset or re-measure.
The Cross Bolt design tightens both ends of the split ring simultaneously, distributing clamping force more evenly across the die body. This approach protects the die's precision and avoids the stress concentration that occurs when torque is applied directly into the die's threads.
This die is built for 6.5 Grendel. Compatibility with your press and other reloading components depends on your specific setup—consult your press manual or contact Forster Products directly if you have questions about fitment.
SKU: 115844839 • Width: 1.9in • Height: 1.7in • Depth: 6.7in • Weight: 0.6oz
Availability: In Stock
The Forster Products Ultra Micrometer Seater Die for 6.5 Grendel brings competition-grade precision to your handloading bench. Built for reloaders who refuse to settle for guesswork, this micrometer seater die lets you dial in bullet seating depth with repeatable accuracy—critical for consistent velocities, tight groups, and reliable performance whether you're building match rounds or hunting loads. The micrometer adjustment system makes it simple to record your ideal seating depth and return to it every time, and switching between different bullet profiles is as straightforward as turning the dial back to your saved setting.
Forster's reputation in precision reloading stems from meticulous manufacturing: each die is machined from quality steel to exacting tolerances, hand polished before and after heat-treating, and finished to a fine surface that resists wear. The Cross Bolt Die Locking Ring—a Forster signature—tightens both ends of the split ring body rather than applying torque directly to the die threads, distributing clamping force more evenly and protecting the die's precision geometry over thousands of rounds.
The micrometer head allows bullet seating depth adjustments in increments as fine as .0005 inch to .001 inch, giving you the control needed to fine-tune concentricity and bullet jump. This level of precision is especially valuable when you're optimizing loads for specific rifles or experimenting with seating depth to maximize accuracy. Whether you're a benchrest competitor, a precision hunter dialing in a new wildcat, or a serious handloader who values consistency, this die rewards attention to detail.
| Product | Forster Ultra Micrometer Seater Die |
| Caliber | 6.5 Grendel |
| Part Number | U00059 |
| Micrometer Adjustment Range | .0005–.001 inch increments |
| Die Body Material | Heat-treated steel, hand-polished |
| Locking Mechanism | Cross Bolt Die Locking Ring |
The micrometer allows adjustments in increments as fine as .0005 inch to .001 inch, giving you control down to a tenth of a thousandth of an inch. This precision is ideal for optimizing bullet seating depth to reduce variance and improve group consistency.
Yes. The micrometer dial is marked so you can record your ideal seating depth setting for a specific bullet profile. When you switch bullets, you simply dial the micrometer back to your recorded number—no need to reset or re-measure.
The Cross Bolt design tightens both ends of the split ring simultaneously, distributing clamping force more evenly across the die body. This approach protects the die's precision and avoids the stress concentration that occurs when torque is applied directly into the die's threads.
This die is built for 6.5 Grendel. Compatibility with your press and other reloading components depends on your specific setup—consult your press manual or contact Forster Products directly if you have questions about fitment.
SKU: 115844839 • Width: 1.9in • Height: 1.7in • Depth: 6.7in • Weight: 0.6oz