$80.99
Availability: In Stock
The EGW Tikka T3X Tac A1 1-piece Picatinny base with 30 MOA elevation is a precision scope mount built for shooters who demand durability and accuracy from their rifle platform. This one-piece mount combines the structural rigidity of a unified design with the versatility of full-length Picatinny railing, giving you genuine flexibility in ring placement and accessory mounting. EGW machines these bases in-house and finishes them with Type III hard anodizing, creating an optics mount that stands up to field use and delivers repeatable zero year after year.
Designed specifically for Tikka T3X Tac A1 rifles, this 30 MOA mount is engineered for mid-range to longer hunting applications where you need extra elevation built into the base itself. The 30 MOA geometry allows your scope's adjustment turrets to stay in their useful middle range during typical field conditions—a real advantage if you're shooting everything from 100 to several hundred yards without constantly chasing zero. The full-length Picatinny cross slots mean you're not locked into one ring position; mount your optic where it works best for your eye relief and shooting style.
Installation requires handguard removal and careful attention to the factory mounting screw location, so a competent gunsmith is your best bet here. EGW specifies 20 inch-pounds of torque and a small amount of blue Loctite (sold separately) to keep things secure. Every component—from mounting screws to the wrench included—is USA-manufactured, and the company stands behind the precision of their machining with straightforward specs you can verify against your receiver.
| Mount Style | One-piece Picatinny base |
| Elevation | 30 MOA |
| Compatibility | Tikka T3X Tac A1 |
| Rail Type | Full-length Picatinny with cross slots |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Finish | Type III hard anodized |
| Recommended Torque | 20 inch-pounds |
| Manufacturer | EGW (USA-made) |
Yes—this mount is designed specifically for the Tikka T3X Tac A1 platform. EGW recommends measuring your receiver's hole spacing to confirm it matches their published dimensions before purchase. Because factory mounting screws sit underneath the handguard, installation requires handguard removal.
The mount is compatible with both Picatinny-style and Weaver-style scope rings, giving you flexibility in ring selection. The full-length Picatinny rail also allows you to position your rings anywhere along the mount rather than being locked into a fixed position.
A 30 MOA mount provides additional elevation for extended shooting distances. EGW recommends a 20 MOA mount for shooting out to 500–1000 yards, so a 30 MOA mount suits hunters who need extra elevation or who frequently shoot beyond those ranges.
The mount includes mounting screws, a wrench, and all components needed for installation—everything is USA-made. EGW recommends installation by a qualified gunsmith, torquing fasteners to 20 inch-pounds with a small amount of blue Loctite (sold separately). Factory handguard removal is required to access the original mount's retaining screw.
SKU: 194196410 • Weight: 0.4oz
Availability: In Stock
The EGW Tikka T3X Tac A1 1-piece Picatinny base with 30 MOA elevation is a precision scope mount built for shooters who demand durability and accuracy from their rifle platform. This one-piece mount combines the structural rigidity of a unified design with the versatility of full-length Picatinny railing, giving you genuine flexibility in ring placement and accessory mounting. EGW machines these bases in-house and finishes them with Type III hard anodizing, creating an optics mount that stands up to field use and delivers repeatable zero year after year.
Designed specifically for Tikka T3X Tac A1 rifles, this 30 MOA mount is engineered for mid-range to longer hunting applications where you need extra elevation built into the base itself. The 30 MOA geometry allows your scope's adjustment turrets to stay in their useful middle range during typical field conditions—a real advantage if you're shooting everything from 100 to several hundred yards without constantly chasing zero. The full-length Picatinny cross slots mean you're not locked into one ring position; mount your optic where it works best for your eye relief and shooting style.
Installation requires handguard removal and careful attention to the factory mounting screw location, so a competent gunsmith is your best bet here. EGW specifies 20 inch-pounds of torque and a small amount of blue Loctite (sold separately) to keep things secure. Every component—from mounting screws to the wrench included—is USA-manufactured, and the company stands behind the precision of their machining with straightforward specs you can verify against your receiver.
| Mount Style | One-piece Picatinny base |
| Elevation | 30 MOA |
| Compatibility | Tikka T3X Tac A1 |
| Rail Type | Full-length Picatinny with cross slots |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Finish | Type III hard anodized |
| Recommended Torque | 20 inch-pounds |
| Manufacturer | EGW (USA-made) |
Yes—this mount is designed specifically for the Tikka T3X Tac A1 platform. EGW recommends measuring your receiver's hole spacing to confirm it matches their published dimensions before purchase. Because factory mounting screws sit underneath the handguard, installation requires handguard removal.
The mount is compatible with both Picatinny-style and Weaver-style scope rings, giving you flexibility in ring selection. The full-length Picatinny rail also allows you to position your rings anywhere along the mount rather than being locked into a fixed position.
A 30 MOA mount provides additional elevation for extended shooting distances. EGW recommends a 20 MOA mount for shooting out to 500–1000 yards, so a 30 MOA mount suits hunters who need extra elevation or who frequently shoot beyond those ranges.
The mount includes mounting screws, a wrench, and all components needed for installation—everything is USA-made. EGW recommends installation by a qualified gunsmith, torquing fasteners to 20 inch-pounds with a small amount of blue Loctite (sold separately). Factory handguard removal is required to access the original mount's retaining screw.
SKU: 194196410 • Weight: 0.4oz