EGW197556327
Egw Marlin 1895, 336, 444 0 Moa$26.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Marlin 1895, 336, 444 scope base brings modern Picatinny mounting to three of the most popular lever-action rifles without requiring any gunsmithing. Drilled to match your rifle's factory receiver mounting holes, this one-piece aluminum rail lets you mount a scope—or swap between scopes—using standard Picatinny or Weaver rings, giving you the flexibility to dial in the perfect eye relief and sight picture for your hunting or range setup.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specifications, the mount is rigid enough to hold zero through years of field use. The milled center channel keeps weight minimal without sacrificing strength, and the full-width cross-slots are gauged to +/−.002" for tight, consistent ring fit. Installation is straightforward: the base bolts directly to your rifle's receiver, and EGW includes socket head Torx screws and the wrench you need to do the job. A dab of blue Loctite and 20 inch-pounds of torque—both recommended by the manufacturer—ensure your base stays put.
If you shoot a Marlin 1895, 336, or 444 and want to add optics without the cost and hassle of a gunsmith, this is the cleanest way to do it. Zero modifications to your rifle, zero permanent changes—just solid, dependable performance.
| Material | 6061 T6 Extruded Aluminum |
| Mounting Standard | Picatinny / MIL-STD 1913 |
| Compatible Rifles | Marlin 1895, 336, 444 |
| Ring Compatibility | Picatinny or Weaver rings |
| Slot Tolerance | +/−.002" to spec |
| Recommended Torque | 20 inch-lbs |
| Recommended Loctite | Blue (medium strength) |
| Finish | Silver |
Yes. The EGW base is drilled to match your rifle's factory receiver mounting holes, so no gunsmithing is required. It bolts directly on using the included hardware.
The mount accepts any rings built to Picatinny or Weaver standards. This gives you flexibility to choose rings that fit your scope diameter and intended use.
The base comes with socket head Torx screws and a wrench. EGW also recommends blue Loctite (medium strength) and 20 inch-pounds of torque for installation, though those must be sourced separately.
It's a one-piece design, which provides maximum rigidity and simplicity for a straightforward, reliable mounting solution.
SKU: 197556095 • Weight: 0.1oz
Availability: In Stock
The EGW Marlin 1895, 336, 444 scope base brings modern Picatinny mounting to three of the most popular lever-action rifles without requiring any gunsmithing. Drilled to match your rifle's factory receiver mounting holes, this one-piece aluminum rail lets you mount a scope—or swap between scopes—using standard Picatinny or Weaver rings, giving you the flexibility to dial in the perfect eye relief and sight picture for your hunting or range setup.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specifications, the mount is rigid enough to hold zero through years of field use. The milled center channel keeps weight minimal without sacrificing strength, and the full-width cross-slots are gauged to +/−.002" for tight, consistent ring fit. Installation is straightforward: the base bolts directly to your rifle's receiver, and EGW includes socket head Torx screws and the wrench you need to do the job. A dab of blue Loctite and 20 inch-pounds of torque—both recommended by the manufacturer—ensure your base stays put.
If you shoot a Marlin 1895, 336, or 444 and want to add optics without the cost and hassle of a gunsmith, this is the cleanest way to do it. Zero modifications to your rifle, zero permanent changes—just solid, dependable performance.
| Material | 6061 T6 Extruded Aluminum |
| Mounting Standard | Picatinny / MIL-STD 1913 |
| Compatible Rifles | Marlin 1895, 336, 444 |
| Ring Compatibility | Picatinny or Weaver rings |
| Slot Tolerance | +/−.002" to spec |
| Recommended Torque | 20 inch-lbs |
| Recommended Loctite | Blue (medium strength) |
| Finish | Silver |
Yes. The EGW base is drilled to match your rifle's factory receiver mounting holes, so no gunsmithing is required. It bolts directly on using the included hardware.
The mount accepts any rings built to Picatinny or Weaver standards. This gives you flexibility to choose rings that fit your scope diameter and intended use.
The base comes with socket head Torx screws and a wrench. EGW also recommends blue Loctite (medium strength) and 20 inch-pounds of torque for installation, though those must be sourced separately.
It's a one-piece design, which provides maximum rigidity and simplicity for a straightforward, reliable mounting solution.
SKU: 197556095 • Weight: 0.1oz