$26.99
Availability: In Stock
The EGW Browning BBR Picatinny rail scope mount transforms your shotgun's mounting system without the gunsmith visit. This one-piece rail attaches directly to your Browning BBR receiver using the factory scope mount holes—no drilling, no tapping required. Once installed, you get a full Picatinny rail that accepts any standard Picatinny or Weaver scope rings, giving you genuine flexibility in optic choice and eye relief adjustment.
Built from 6061 T6 extruded aluminum, the EGW mount is precision-machined to MIL-STD 1913 specifications with tolerances of +/-.002 inches. The Picatinny slots are gauged to spec, ensuring rock-solid repeatability and zero shift between ring placements. The tactical version incorporates a milled center channel that strips weight without compromising rigidity—a practical touch for hunters who pack their shotguns into the field.
Installation is straightforward: the mount comes with socket head Torx screws and wrench. EGW recommends 20 inch-pounds of torque and a small drop of blue Loctite to secure the mount permanently. Once torqued down, you'll have a stable platform ready for your choice of rings and optics. The one-piece design keeps the rail solid and simplifies future optic swaps—just unbolt the rings, slide on your next scope, and you're back in business.
| Material | 6061 T6 extruded aluminum |
| Mount Type | One-piece Picatinny rail |
| Rail Standard | MIL-STD 1913 Picatinny (tolerances +/-.002") |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Fitment | Browning BBR receiver factory scope mount holes |
| Installation | Fastens with socket head Torx screws (wrench included) |
| Recommended Torque | 20 inch-pounds with blue Loctite |
Yes. The mount is designed to attach to the factory scope mount holes on the Browning BBR receiver. It requires no drilling or tapping—it bolts directly in place using the existing receiver holes.
The EGW rail is gauged to MIL-STD 1913 Picatinny specs and accepts any standard Picatinny or Weaver scope rings. This gives you flexibility to choose rings that match your optic and shooting style.
The mount comes with socket head Torx screws and a Torx wrench for installation. EGW recommends using blue Loctite and torquing to 20 inch-pounds for a permanent, secure mount.
Yes. Because the rail stays permanently mounted to your receiver, you simply unbolt your current scope rings, slide them off the Picatinny rail, and bolt on a new set of rings with a different optic. No remounting hardware needed.
SKU: 197556179 • Weight: 0.2oz
Availability: In Stock
The EGW Browning BBR Picatinny rail scope mount transforms your shotgun's mounting system without the gunsmith visit. This one-piece rail attaches directly to your Browning BBR receiver using the factory scope mount holes—no drilling, no tapping required. Once installed, you get a full Picatinny rail that accepts any standard Picatinny or Weaver scope rings, giving you genuine flexibility in optic choice and eye relief adjustment.
Built from 6061 T6 extruded aluminum, the EGW mount is precision-machined to MIL-STD 1913 specifications with tolerances of +/-.002 inches. The Picatinny slots are gauged to spec, ensuring rock-solid repeatability and zero shift between ring placements. The tactical version incorporates a milled center channel that strips weight without compromising rigidity—a practical touch for hunters who pack their shotguns into the field.
Installation is straightforward: the mount comes with socket head Torx screws and wrench. EGW recommends 20 inch-pounds of torque and a small drop of blue Loctite to secure the mount permanently. Once torqued down, you'll have a stable platform ready for your choice of rings and optics. The one-piece design keeps the rail solid and simplifies future optic swaps—just unbolt the rings, slide on your next scope, and you're back in business.
| Material | 6061 T6 extruded aluminum |
| Mount Type | One-piece Picatinny rail |
| Rail Standard | MIL-STD 1913 Picatinny (tolerances +/-.002") |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Fitment | Browning BBR receiver factory scope mount holes |
| Installation | Fastens with socket head Torx screws (wrench included) |
| Recommended Torque | 20 inch-pounds with blue Loctite |
Yes. The mount is designed to attach to the factory scope mount holes on the Browning BBR receiver. It requires no drilling or tapping—it bolts directly in place using the existing receiver holes.
The EGW rail is gauged to MIL-STD 1913 Picatinny specs and accepts any standard Picatinny or Weaver scope rings. This gives you flexibility to choose rings that match your optic and shooting style.
The mount comes with socket head Torx screws and a Torx wrench for installation. EGW recommends using blue Loctite and torquing to 20 inch-pounds for a permanent, secure mount.
Yes. Because the rail stays permanently mounted to your receiver, you simply unbolt your current scope rings, slide them off the Picatinny rail, and bolt on a new set of rings with a different optic. No remounting hardware needed.
SKU: 197556179 • Weight: 0.2oz