EGW194196371
Egw Ar Extendariser Picatinny Rail 0 Moa$112.49
Availability: In Stock
The EGW Picatinny Rail 0 MOA is a one-piece aluminum scope mount designed to add modern optics capability to shotguns without gunsmithing. If your shotgun has factory scope mount holes on the receiver, this rail drops in and secures with the included socket head Torx screws—no drilling or tapping required. Built from extruded 6061 T6 aluminum, it's rigid enough to handle recoil while staying lightweight, and its 0 MOA orientation means it mounts flat and level to your receiver for a clean, co-witness fit with compatible optics.
The rail's Picatinny slots are precision-machined to MIL-STD 1913 specifications (±.002"), so you can mount any Picatinny or Weaver scope rings and dial in eye relief to your preference. This flexibility is huge if you're upgrading to a modern variable or red-dot sight and want to fine-tune the setup without settling for fixed mounting. The tactical-style milled center channel reduces weight without sacrificing strength—useful if you're carrying a shotgun for hunting or tactical work where every ounce matters.
Installation is straightforward: align the rail with your existing receiver holes, insert the Torx screws, and torque to 20 inch-lbs with a drop of blue loctite for security. The wrench is included in the box. EGW's precision machining means you get consistent, repeatable mounting that won't shift or rattle once locked down.
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| MOA Orientation | 0 MOA |
| Fastener Type | Socket Head Torx Screws (included) |
| Recommended Torque | 20 inch-lbs with blue loctite |
| Ring Compatibility | Picatinny or Weaver rings |
Yes, if your shotgun has factory scope mount holes drilled in the receiver. The EGW rail uses those existing holes, so installation requires only screwing it down with the included Torx wrench. If your shotgun has no receiver mount holes, you'll need drilling and tapping from a gunsmith.
The rail accepts any Picatinny or Weaver-compatible scope rings. This gives you flexibility to choose rings matched to your scope's tube diameter and mounting preference.
Yes. The Picatinny slots allow you to mount rings at different positions along the rail to dial in eye relief, so you can customize your sight picture without replacing the rail.
The rail comes with socket head Torx screws, a Torx wrench, and mounting instructions. You'll provide your own scope rings and optic.
SKU: 197556224 • Weight: 0.1oz
Availability: In Stock
The EGW Picatinny Rail 0 MOA is a one-piece aluminum scope mount designed to add modern optics capability to shotguns without gunsmithing. If your shotgun has factory scope mount holes on the receiver, this rail drops in and secures with the included socket head Torx screws—no drilling or tapping required. Built from extruded 6061 T6 aluminum, it's rigid enough to handle recoil while staying lightweight, and its 0 MOA orientation means it mounts flat and level to your receiver for a clean, co-witness fit with compatible optics.
The rail's Picatinny slots are precision-machined to MIL-STD 1913 specifications (±.002"), so you can mount any Picatinny or Weaver scope rings and dial in eye relief to your preference. This flexibility is huge if you're upgrading to a modern variable or red-dot sight and want to fine-tune the setup without settling for fixed mounting. The tactical-style milled center channel reduces weight without sacrificing strength—useful if you're carrying a shotgun for hunting or tactical work where every ounce matters.
Installation is straightforward: align the rail with your existing receiver holes, insert the Torx screws, and torque to 20 inch-lbs with a drop of blue loctite for security. The wrench is included in the box. EGW's precision machining means you get consistent, repeatable mounting that won't shift or rattle once locked down.
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| MOA Orientation | 0 MOA |
| Fastener Type | Socket Head Torx Screws (included) |
| Recommended Torque | 20 inch-lbs with blue loctite |
| Ring Compatibility | Picatinny or Weaver rings |
Yes, if your shotgun has factory scope mount holes drilled in the receiver. The EGW rail uses those existing holes, so installation requires only screwing it down with the included Torx wrench. If your shotgun has no receiver mount holes, you'll need drilling and tapping from a gunsmith.
The rail accepts any Picatinny or Weaver-compatible scope rings. This gives you flexibility to choose rings matched to your scope's tube diameter and mounting preference.
Yes. The Picatinny slots allow you to mount rings at different positions along the rail to dial in eye relief, so you can customize your sight picture without replacing the rail.
The rail comes with socket head Torx screws, a Torx wrench, and mounting instructions. You'll provide your own scope rings and optic.
SKU: 197556224 • Weight: 0.1oz