Loading...
Loading...
Loading...
Availability: In Stock
The DNZ Products Game Reaper 1-piece scope base with 1" integral rings is purpose-built for CVA Optima Elite and Apex black powder rifles. This machined aluminum mount gives you a direct, rigid connection from receiver to scope—no flex, no complications. If you shoot a modern CVA break-open or centerfire rifle and want a rock-solid optic platform without the weight penalty of traditional steel mounts, the Game Reaper delivers the kind of accuracy foundation that matters when you're counting on your shot.
DNZ machines each base as a single solid block from billet aluminum, custom-fit to your rifle's receiver geometry. That integrated design means precision alignment straight out of the box and zero moving parts between gun and glass—a fundamental advantage for hunting and field accuracy. The one-piece construction runs about two-thirds lighter than comparable four-ring steel mounts while delivering four times the thread count, so you get strength without bulk. Aluminum also absorbs recoil shock and temperature swings better than steel, a real asset when you're hunting across seasons or elevations.
Build quality shows in the details: socket-head cap screws secured with an Allen wrench (9/64" for base screws, 7/64" for ring screws), machined to exact tolerances. The rings hold a standard 1" tube and are available in four height options to dial in your optimal sight picture. Finished in matte to cut glare and blend with modern rifle aesthetics. Made in the USA.
| Tube Diameter | 1" |
| Rifle Compatibility | CVA Optima Elite/Apex (all 2010+ break-open black powder barrels and all years centerfire barrels) |
| Material | Billet aluminum |
| Finish | Matte |
| Mount Type | 1-piece integrated base and rings |
| Base Screw Size | 8-40 × 1/4" (9/64" Allen wrench) |
| Ring Screw Size | 6-40 × 5/8" (7/64" Allen wrench) |
| Ring Width | 0.63" |
| Outside-to-Outside Ring Span | 3.92" |
| Hole-to-Hole Spacing | 0.86" / 0.79" / 0.86" (4-hole pattern) |
| Height Options (Top of Barrel to Scope Centerline) | Low: 1.00" | Medium: 1.13" | High: 1.25" | X-High: 1.38" |
| Country of Origin | USA |
Yes. The Game Reaper is custom-machined for CVA Optima Elite and Apex rifles, covering all 2010 and newer break-open black powder barrels as well as all years of CVA centerfire rifle barrels in that platform.
The Game Reaper comes in four heights: Low (1.00"), Medium (1.13"), High (1.25"), and X-High (1.38") from barrel top to scope centerline. Your choice depends on your scope's objective bell size and your cheek weld preference. Medium is a good general-purpose starting point for most hunting scopes; go Low for tight clearance or High if you prefer a more elevated sight picture or run larger objective lenses.
DNZ provides socket-head cap screws with detailed fit. Base screws use a 9/64" Allen wrench and ring screws a 7/64"—standard tools. The one-piece design and custom fit mean you simply install the base, align it to your receiver, then secure your scope tube in the integral rings. No special tools or gunsmithing needed.
The Game Reaper's billet aluminum weighs roughly two-thirds less than steel mounts while offering superior shock absorption and better thermal stability across temperature swings. Aluminum also machines to tighter tolerances and resists corrosion—advantages for field durability. At this weight and strength level, aluminum is simply the smarter material for modern hunting platforms.
SKU: 114463412 • Width: 3.3in • Height: 1.8in • Depth: 10.8in • Weight: 0.38oz
Availability: In Stock
The DNZ Products Game Reaper 1-piece scope base with 1" integral rings is purpose-built for CVA Optima Elite and Apex black powder rifles. This machined aluminum mount gives you a direct, rigid connection from receiver to scope—no flex, no complications. If you shoot a modern CVA break-open or centerfire rifle and want a rock-solid optic platform without the weight penalty of traditional steel mounts, the Game Reaper delivers the kind of accuracy foundation that matters when you're counting on your shot.
DNZ machines each base as a single solid block from billet aluminum, custom-fit to your rifle's receiver geometry. That integrated design means precision alignment straight out of the box and zero moving parts between gun and glass—a fundamental advantage for hunting and field accuracy. The one-piece construction runs about two-thirds lighter than comparable four-ring steel mounts while delivering four times the thread count, so you get strength without bulk. Aluminum also absorbs recoil shock and temperature swings better than steel, a real asset when you're hunting across seasons or elevations.
Build quality shows in the details: socket-head cap screws secured with an Allen wrench (9/64" for base screws, 7/64" for ring screws), machined to exact tolerances. The rings hold a standard 1" tube and are available in four height options to dial in your optimal sight picture. Finished in matte to cut glare and blend with modern rifle aesthetics. Made in the USA.
| Tube Diameter | 1" |
| Rifle Compatibility | CVA Optima Elite/Apex (all 2010+ break-open black powder barrels and all years centerfire barrels) |
| Material | Billet aluminum |
| Finish | Matte |
| Mount Type | 1-piece integrated base and rings |
| Base Screw Size | 8-40 × 1/4" (9/64" Allen wrench) |
| Ring Screw Size | 6-40 × 5/8" (7/64" Allen wrench) |
| Ring Width | 0.63" |
| Outside-to-Outside Ring Span | 3.92" |
| Hole-to-Hole Spacing | 0.86" / 0.79" / 0.86" (4-hole pattern) |
| Height Options (Top of Barrel to Scope Centerline) | Low: 1.00" | Medium: 1.13" | High: 1.25" | X-High: 1.38" |
| Country of Origin | USA |
Yes. The Game Reaper is custom-machined for CVA Optima Elite and Apex rifles, covering all 2010 and newer break-open black powder barrels as well as all years of CVA centerfire rifle barrels in that platform.
The Game Reaper comes in four heights: Low (1.00"), Medium (1.13"), High (1.25"), and X-High (1.38") from barrel top to scope centerline. Your choice depends on your scope's objective bell size and your cheek weld preference. Medium is a good general-purpose starting point for most hunting scopes; go Low for tight clearance or High if you prefer a more elevated sight picture or run larger objective lenses.
DNZ provides socket-head cap screws with detailed fit. Base screws use a 9/64" Allen wrench and ring screws a 7/64"—standard tools. The one-piece design and custom fit mean you simply install the base, align it to your receiver, then secure your scope tube in the integral rings. No special tools or gunsmithing needed.
The Game Reaper's billet aluminum weighs roughly two-thirds less than steel mounts while offering superior shock absorption and better thermal stability across temperature swings. Aluminum also machines to tighter tolerances and resists corrosion—advantages for field durability. At this weight and strength level, aluminum is simply the smarter material for modern hunting platforms.
SKU: 114463412 • Width: 3.3in • Height: 1.8in • Depth: 10.8in • Weight: 0.38oz