Availability: In Stock
Current Stock: Out of stock
The DNZ Products Game Reaper 1-Piece 30mm Scope Base with Integral Rings for Remington 700 Short Action is a precision-engineered mounting solution built for hunters and shooters who demand a single rigid platform for their optics. Unlike traditional two-piece bases, this one-piece design eliminates moving parts between your rifle receiver and scope, delivering the kind of rock-solid, repeatable accuracy that matters when the shot counts. Machined from solid-block 6061-T6 billet aluminum and finished in matte, it's made in the USA to fit Remington 700, 721, and 722 short-action rifles—and also compatible with Bergara B14 platforms.
The Game Reaper's integrated 30mm rings save weight without sacrificing strength; DNZ engineered it to be 67 percent lighter than comparable one-piece mounts while delivering four times the thread density and using precision socket-head cap screws for uncompromising security. Aluminum naturally absorbs shock and handles temperature swings better than steel, giving you a mount that performs consistently whether you're glassing in summer heat or settling in for a cold-weather hunt. The matte finish resists glare and blends into your rifle's aesthetics.
Available in three height options—low, medium, or high—the Game Reaper lets you dial in cheek weld and eye relief to your exact setup. Standard rings measure .63" wide with two ring screws per side; tactical rings are .80" wide with four screws for added clamping security if you're running a heavier scope. All mounting hardware uses a 7/64" Allen wrench for quick adjustments in the field.
| Scope Tube Diameter | 30mm |
| Mounting Style | 1-Piece Integral Base and Rings |
| Firearm Compatibility | Remington 700, 721, 722 Short Action; Bergara B14 |
| Material | 6061-T6 Billet Aluminum |
| Finish | Matte |
| Outside Ring Spacing | 4.26" |
| Standard Ring Width | .63" |
| Tactical Ring Width | .80" |
| Base Mounting Holes | 4 (spacing: .86" × 3.63" × .60") |
| Low Height (Centerline) | .98" |
| Medium Height (Centerline) | 1.11" |
| High Height (Centerline) | 1.23" |
| Base Screws | 6-48 × 1/4" (requires 7/64" Allen wrench) |
| Ring Screws | 6-40 × 5/8" (requires 7/64" Allen wrench) |
The Game Reaper 1-Piece Base is designed for Remington 700, 721, and 722 short-action rifles. It also fits Bergara B14 platforms. Always verify your rifle's action length and model before ordering.
Height selection depends on your scope's objective lens diameter, your preferred cheek weld, and your rifle's ergonomics. Low rings (.98" centerline) work well for lower-power or standard hunting scopes; medium (1.11") is a versatile middle ground; high (1.23") accommodates larger objective lenses and provides more clearance for backup iron sights. Measure or test-fit before committing to a height.
Both standard (.63" wide, 2 ring screws) and tactical (.80" wide, 4 ring screws) ring configurations are available as options. Standard rings suit most hunting and range setups; tactical rings provide additional clamping area for heavier optics or tactical applications.
You'll need a 7/64" Allen wrench to tighten all base and ring screws. All hardware is included; follow standard scope mounting torque specifications (typically 15–25 inch-pounds for base screws, depending on your gunsmith's recommendation) to avoid over-tightening.
SKU: 142077117 • Width: 3.4in • Height: 1.9in • Depth: 10.7in • Weight: 0.38oz
Availability: In Stock
Current Stock: Out of stock
The DNZ Products Game Reaper 1-Piece 30mm Scope Base with Integral Rings for Remington 700 Short Action is a precision-engineered mounting solution built for hunters and shooters who demand a single rigid platform for their optics. Unlike traditional two-piece bases, this one-piece design eliminates moving parts between your rifle receiver and scope, delivering the kind of rock-solid, repeatable accuracy that matters when the shot counts. Machined from solid-block 6061-T6 billet aluminum and finished in matte, it's made in the USA to fit Remington 700, 721, and 722 short-action rifles—and also compatible with Bergara B14 platforms.
The Game Reaper's integrated 30mm rings save weight without sacrificing strength; DNZ engineered it to be 67 percent lighter than comparable one-piece mounts while delivering four times the thread density and using precision socket-head cap screws for uncompromising security. Aluminum naturally absorbs shock and handles temperature swings better than steel, giving you a mount that performs consistently whether you're glassing in summer heat or settling in for a cold-weather hunt. The matte finish resists glare and blends into your rifle's aesthetics.
Available in three height options—low, medium, or high—the Game Reaper lets you dial in cheek weld and eye relief to your exact setup. Standard rings measure .63" wide with two ring screws per side; tactical rings are .80" wide with four screws for added clamping security if you're running a heavier scope. All mounting hardware uses a 7/64" Allen wrench for quick adjustments in the field.
| Scope Tube Diameter | 30mm |
| Mounting Style | 1-Piece Integral Base and Rings |
| Firearm Compatibility | Remington 700, 721, 722 Short Action; Bergara B14 |
| Material | 6061-T6 Billet Aluminum |
| Finish | Matte |
| Outside Ring Spacing | 4.26" |
| Standard Ring Width | .63" |
| Tactical Ring Width | .80" |
| Base Mounting Holes | 4 (spacing: .86" × 3.63" × .60") |
| Low Height (Centerline) | .98" |
| Medium Height (Centerline) | 1.11" |
| High Height (Centerline) | 1.23" |
| Base Screws | 6-48 × 1/4" (requires 7/64" Allen wrench) |
| Ring Screws | 6-40 × 5/8" (requires 7/64" Allen wrench) |
The Game Reaper 1-Piece Base is designed for Remington 700, 721, and 722 short-action rifles. It also fits Bergara B14 platforms. Always verify your rifle's action length and model before ordering.
Height selection depends on your scope's objective lens diameter, your preferred cheek weld, and your rifle's ergonomics. Low rings (.98" centerline) work well for lower-power or standard hunting scopes; medium (1.11") is a versatile middle ground; high (1.23") accommodates larger objective lenses and provides more clearance for backup iron sights. Measure or test-fit before committing to a height.
Both standard (.63" wide, 2 ring screws) and tactical (.80" wide, 4 ring screws) ring configurations are available as options. Standard rings suit most hunting and range setups; tactical rings provide additional clamping area for heavier optics or tactical applications.
You'll need a 7/64" Allen wrench to tighten all base and ring screws. All hardware is included; follow standard scope mounting torque specifications (typically 15–25 inch-pounds for base screws, depending on your gunsmith's recommendation) to avoid over-tightening.
SKU: 142077117 • Width: 3.4in • Height: 1.9in • Depth: 10.7in • Weight: 0.38oz