Daniel Defense126797793
Daniel Defense MFR 10.0 M-LOK Handguard Assembly - Black$315.00
Availability: In Stock
The Daniel Defense MFR 13.5" M-LOK handguard assembly is a lightweight, free-floating rail system built for AR-15 shooters who demand a compact profile without sacrificing modularity. At 13.5 inches, it strikes a balance between control and accessory real estate—short enough for quick handling and transitions, long enough to mount lights, lasers, and grips where they matter. The bolt-on design attaches directly to your standard AR-15 barrel nut, keeping the outside diameter minimal for a natural, ergonomic grip angle that doesn't force your hand into an awkward purchase.
Daniel Defense machined this handguard from 6061 T6 aluminum and finished it with Type III hardcoat anodize, a proven military-spec coating that handles hard use, salt spray, and years of range and field work. The free-floating design isolates barrel harmonics, which some shooters find beneficial for consistency. Seven rows of M-LOK slots run down the sides and bottom, giving you flexible mounting options for hand stops, rail sections, and other tactical accessories. The top features an uninterrupted MIL-STD 1913 Picatinny rail for optics mounts, lights, or backup iron sights. Ambidextrous QD pushbutton sling attachment points are machined directly into the left and right side rails, so you can rig a single-point or two-point sling without adapters.
Anti-rotation tabs keep the handguard locked in alignment with your receiver, and Grade 8 military-specification fasteners ensure nothing shifts under recoil. The assembly works across all standard gas tube lengths—pistol, carbine, mid-length, and rifle—as long as you're using a pinned low-profile gas block. Whether you're running a precision carbine, a duty rifle, or a lightweight hunting build, this is a no-compromise rail that rewards good setup and smart accessory planning.
| Length | 13.5 inches |
| Material | 6061 T6 aluminum |
| Finish | Type III hardcoat anodize |
| Attachment Method | Bolt-on to standard AR-15 barrel nut |
| Top Rail | MIL-STD 1913 Picatinny (full-length, uninterrupted) |
| Accessory System | M-LOK (seven rows: sides and bottom) |
| Sling Attachment | Ambidextrous QD pushbutton points (left and right sides) |
| Gas Tube Compatibility | Pistol, carbine, mid-length, rifle length (with pinned low-profile gas block) |
| Color | Black |
| Fasteners | Grade 8 military specification |
Yes, provided your rifle has a standard AR-15 barrel nut and you're running a pinned low-profile gas block. The handguard's bolt-on system attaches directly to the barrel nut, so no special modifications are needed. It's compatible with all standard gas tube lengths: pistol, carbine, mid-length, and rifle.
M-LOK slots run along the sides and bottom of the handguard in seven rows, allowing you to mount lights, hand stops, rail sections, vertical grips, and other accessories without adding weight or bulk. The modular approach means you attach only what you need, exactly where you want it.
Yes. The top features a full-length, uninterrupted MIL-STD 1913 Picatinny rail, so you can mount optics, backup iron sights, lights, and other standard Picatinny accessories directly without adapters.
Yes. Ambidextrous QD pushbutton sling swivel attachment points are integrated into both the left and right side rails, allowing you to mount a single-point or two-point sling on either side or both.
SKU: 126797653 • Depth: 13.79in • Weight: 1oz
Availability: In Stock
The Daniel Defense MFR 13.5" M-LOK handguard assembly is a lightweight, free-floating rail system built for AR-15 shooters who demand a compact profile without sacrificing modularity. At 13.5 inches, it strikes a balance between control and accessory real estate—short enough for quick handling and transitions, long enough to mount lights, lasers, and grips where they matter. The bolt-on design attaches directly to your standard AR-15 barrel nut, keeping the outside diameter minimal for a natural, ergonomic grip angle that doesn't force your hand into an awkward purchase.
Daniel Defense machined this handguard from 6061 T6 aluminum and finished it with Type III hardcoat anodize, a proven military-spec coating that handles hard use, salt spray, and years of range and field work. The free-floating design isolates barrel harmonics, which some shooters find beneficial for consistency. Seven rows of M-LOK slots run down the sides and bottom, giving you flexible mounting options for hand stops, rail sections, and other tactical accessories. The top features an uninterrupted MIL-STD 1913 Picatinny rail for optics mounts, lights, or backup iron sights. Ambidextrous QD pushbutton sling attachment points are machined directly into the left and right side rails, so you can rig a single-point or two-point sling without adapters.
Anti-rotation tabs keep the handguard locked in alignment with your receiver, and Grade 8 military-specification fasteners ensure nothing shifts under recoil. The assembly works across all standard gas tube lengths—pistol, carbine, mid-length, and rifle—as long as you're using a pinned low-profile gas block. Whether you're running a precision carbine, a duty rifle, or a lightweight hunting build, this is a no-compromise rail that rewards good setup and smart accessory planning.
| Length | 13.5 inches |
| Material | 6061 T6 aluminum |
| Finish | Type III hardcoat anodize |
| Attachment Method | Bolt-on to standard AR-15 barrel nut |
| Top Rail | MIL-STD 1913 Picatinny (full-length, uninterrupted) |
| Accessory System | M-LOK (seven rows: sides and bottom) |
| Sling Attachment | Ambidextrous QD pushbutton points (left and right sides) |
| Gas Tube Compatibility | Pistol, carbine, mid-length, rifle length (with pinned low-profile gas block) |
| Color | Black |
| Fasteners | Grade 8 military specification |
Yes, provided your rifle has a standard AR-15 barrel nut and you're running a pinned low-profile gas block. The handguard's bolt-on system attaches directly to the barrel nut, so no special modifications are needed. It's compatible with all standard gas tube lengths: pistol, carbine, mid-length, and rifle.
M-LOK slots run along the sides and bottom of the handguard in seven rows, allowing you to mount lights, hand stops, rail sections, vertical grips, and other accessories without adding weight or bulk. The modular approach means you attach only what you need, exactly where you want it.
Yes. The top features a full-length, uninterrupted MIL-STD 1913 Picatinny rail, so you can mount optics, backup iron sights, lights, and other standard Picatinny accessories directly without adapters.
Yes. Ambidextrous QD pushbutton sling swivel attachment points are integrated into both the left and right side rails, allowing you to mount a single-point or two-point sling on either side or both.
SKU: 126797653 • Depth: 13.79in • Weight: 1oz