Crimson Trace167525974
Crimson Trace Revolver Lasergrip S&W Round-Butt N-Frame$299.95
Loading...
Loading...
Loading...
Availability: In Stock
The Crimson Trace Lasergrips for S&W K, L, N-Frame square butt revolvers put a red laser sight exactly where your hand naturally goes—the grip itself. Instead of bolting on an accessory, these laser grips replace your stock grips with hard polymer panels that look and feel like factory Smith & Wesson grips, except they're sighted and ready to give you a precise aiming dot without taking up rail space or adding bulk to your holster.
Pressure activation means you activate the laser the same way you would naturally grip the gun—no thumb switches, no learning curve. The red laser is factory sighted at 50 feet and gives you a half-inch dot at that distance, which is plenty of precision for self-defense distances or tactical training. The polymer construction is snag-free, so they won't catch on clothing or holster materials if you ever need to draw in a hurry.
Two CR2032 batteries power the laser to over four hours of run time, and the unit includes user-adjustable windage and elevation so you can fine-tune the point of aim to your specific gun and ammunition. Installation is straightforward—you can do it yourself with just a 0.028-inch wrench. Crimson Trace backs the whole package with a three-year warranty, because they stand behind their gear the same way we do.
| Platform | S&W K, L, N-Frame Square Butt |
| Laser Type | 5mW Red Laser |
| Activation | Pressure Activated (Front) |
| Material | Hard Polymer |
| Color | Black |
| Factory Sight Distance | 50 feet |
| Laser Dot Size | Approximately 0.5 inch at 50 feet |
| Battery Type | Two CR2032 Batteries |
| Battery Life | Over 4 hours |
| Adjustment | User-Adjustable Windage and Elevation |
| Master On/Off Switch | Yes |
| Installation | User Installed (0.028" wrench) |
| Warranty | Three Year Full Warranty |
These Lasergrips are designed specifically for Smith & Wesson K, L, and N-frame revolvers with square butt grip frames. If you're unsure which frame your S&W is, check your revolver's documentation or contact us—we're happy to confirm compatibility before you order.
Yes. The windage and elevation are user-adjustable, so you can zero the laser to your specific revolver and ammunition. The grips come factory sighted at 50 feet as a starting point.
The laser runs for over four hours on a set of two CR2032 batteries. Battery life depends on how frequently you activate the laser during normal use.
No. Installation is user-friendly and requires only a 0.028-inch wrench. The grips replace your factory grips, so if you've ever swapped grips on a revolver before, the process is the same.
SKU: 115691944 • Width: 2.9in • Height: 2.1in • Depth: 5.4in • Weight: 0.44oz
Availability: In Stock
The Crimson Trace Lasergrips for S&W K, L, N-Frame square butt revolvers put a red laser sight exactly where your hand naturally goes—the grip itself. Instead of bolting on an accessory, these laser grips replace your stock grips with hard polymer panels that look and feel like factory Smith & Wesson grips, except they're sighted and ready to give you a precise aiming dot without taking up rail space or adding bulk to your holster.
Pressure activation means you activate the laser the same way you would naturally grip the gun—no thumb switches, no learning curve. The red laser is factory sighted at 50 feet and gives you a half-inch dot at that distance, which is plenty of precision for self-defense distances or tactical training. The polymer construction is snag-free, so they won't catch on clothing or holster materials if you ever need to draw in a hurry.
Two CR2032 batteries power the laser to over four hours of run time, and the unit includes user-adjustable windage and elevation so you can fine-tune the point of aim to your specific gun and ammunition. Installation is straightforward—you can do it yourself with just a 0.028-inch wrench. Crimson Trace backs the whole package with a three-year warranty, because they stand behind their gear the same way we do.
| Platform | S&W K, L, N-Frame Square Butt |
| Laser Type | 5mW Red Laser |
| Activation | Pressure Activated (Front) |
| Material | Hard Polymer |
| Color | Black |
| Factory Sight Distance | 50 feet |
| Laser Dot Size | Approximately 0.5 inch at 50 feet |
| Battery Type | Two CR2032 Batteries |
| Battery Life | Over 4 hours |
| Adjustment | User-Adjustable Windage and Elevation |
| Master On/Off Switch | Yes |
| Installation | User Installed (0.028" wrench) |
| Warranty | Three Year Full Warranty |
These Lasergrips are designed specifically for Smith & Wesson K, L, and N-frame revolvers with square butt grip frames. If you're unsure which frame your S&W is, check your revolver's documentation or contact us—we're happy to confirm compatibility before you order.
Yes. The windage and elevation are user-adjustable, so you can zero the laser to your specific revolver and ammunition. The grips come factory sighted at 50 feet as a starting point.
The laser runs for over four hours on a set of two CR2032 batteries. Battery life depends on how frequently you activate the laser during normal use.
No. Installation is user-friendly and requires only a 0.028-inch wrench. The grips replace your factory grips, so if you've ever swapped grips on a revolver before, the process is the same.
SKU: 115691944 • Width: 2.9in • Height: 2.1in • Depth: 5.4in • Weight: 0.44oz