Crimson Trace115648489
Crimson Trace Lasergrips for Smith & Wesson J-Frame Round Butt - Black$329.95
Availability: In Stock
The Crimson Trace Lasergrips for Smith & Wesson J-Frame revolvers are a practical choice for shooters who want a reliable aiming solution on a defensive or carry revolver. These grip-mounted laser sights replace your factory grips and activate with simple pressure on the front—no complicated modes or switches to fumble with in a stressful moment. The polymer construction is built tough enough for duty use while the smooth surface won't snag on clothing or leather during the draw, making them well-suited for concealed carry or home-defense scenarios.
What makes these lasergrips useful is the combination of simplicity and durability. The red laser projects a precise aiming point at defensive ranges, and Crimson Trace factory-sights them at 50 feet so they're ready to work from the box. The polymer grip with rubber overmold activation pad gives you a secure, non-slip hold in any weather or lighting condition. Two standard #2032 batteries keep it running for over four hours of continuous operation, and the windage and elevation are user-adjustable if you need to fine-tune the zero after installation.
Installation is straightforward—these are drop-in grip replacements that you can install yourself with basic tools. If something goes wrong, Crimson Trace backs them with a three-year full warranty, so you're covered. For J-Frame shooters building a reliable, low-maintenance defensive setup without the complexity of rail-mounted lights or external accessories, these lasergrips offer a time-tested solution that works.
| Firearm Platform | Smith & Wesson J-Frame Round Butt |
| Attachment Method | Grip Replacement |
| Material | Polymer with Rubber Overmold Activation Pad |
| Laser Output | 5mW Red Laser |
| Activation | Pressure-Activated (Front Pad) |
| Sighting Distance | Factory Sighted at 50 Feet |
| Laser Dot Size | Approximately 0.50 Inch at 50 Feet |
| Windage/Elevation | User-Adjustable |
| Battery Type | Two #2032 Batteries |
| Battery Life | Over Four Hours (Continuous Use) |
| Installation | User-Installed |
| Color | Black |
| Warranty | Three-Year Full Warranty |
Yes—these grips are designed specifically for S&W J-Frame round-butt models. They are grip replacements, so they install where your factory grips go. Installation is user-friendly and requires basic tools.
The laser activates via pressure on the front pad built into the grip. This pressure-activated design means the laser comes on when you grip the revolver naturally, without fumbling for switches or buttons.
The Lasergrips use two standard #2032 batteries. Each pair will run the laser continuously for over four hours before needing replacement, making them practical for both training and daily carry.
Yes. The windage and elevation are user-adjustable, so you can fine-tune the laser zero after installation. They come factory-sighted at 50 feet, which is a practical defensive distance.
SKU: 115661749 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.25oz
Availability: In Stock
The Crimson Trace Lasergrips for Smith & Wesson J-Frame revolvers are a practical choice for shooters who want a reliable aiming solution on a defensive or carry revolver. These grip-mounted laser sights replace your factory grips and activate with simple pressure on the front—no complicated modes or switches to fumble with in a stressful moment. The polymer construction is built tough enough for duty use while the smooth surface won't snag on clothing or leather during the draw, making them well-suited for concealed carry or home-defense scenarios.
What makes these lasergrips useful is the combination of simplicity and durability. The red laser projects a precise aiming point at defensive ranges, and Crimson Trace factory-sights them at 50 feet so they're ready to work from the box. The polymer grip with rubber overmold activation pad gives you a secure, non-slip hold in any weather or lighting condition. Two standard #2032 batteries keep it running for over four hours of continuous operation, and the windage and elevation are user-adjustable if you need to fine-tune the zero after installation.
Installation is straightforward—these are drop-in grip replacements that you can install yourself with basic tools. If something goes wrong, Crimson Trace backs them with a three-year full warranty, so you're covered. For J-Frame shooters building a reliable, low-maintenance defensive setup without the complexity of rail-mounted lights or external accessories, these lasergrips offer a time-tested solution that works.
| Firearm Platform | Smith & Wesson J-Frame Round Butt |
| Attachment Method | Grip Replacement |
| Material | Polymer with Rubber Overmold Activation Pad |
| Laser Output | 5mW Red Laser |
| Activation | Pressure-Activated (Front Pad) |
| Sighting Distance | Factory Sighted at 50 Feet |
| Laser Dot Size | Approximately 0.50 Inch at 50 Feet |
| Windage/Elevation | User-Adjustable |
| Battery Type | Two #2032 Batteries |
| Battery Life | Over Four Hours (Continuous Use) |
| Installation | User-Installed |
| Color | Black |
| Warranty | Three-Year Full Warranty |
Yes—these grips are designed specifically for S&W J-Frame round-butt models. They are grip replacements, so they install where your factory grips go. Installation is user-friendly and requires basic tools.
The laser activates via pressure on the front pad built into the grip. This pressure-activated design means the laser comes on when you grip the revolver naturally, without fumbling for switches or buttons.
The Lasergrips use two standard #2032 batteries. Each pair will run the laser continuously for over four hours before needing replacement, making them practical for both training and daily carry.
Yes. The windage and elevation are user-adjustable, so you can fine-tune the laser zero after installation. They come factory-sighted at 50 feet, which is a practical defensive distance.
SKU: 115661749 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.25oz