Crimson Trace114462969
Crimson Trace RAD Micro 3 MOA Red Dot Reticle, Matte Black, Compact/Sub-Compact Pistol Sight with Radiant Ambient Light Sensor$179.95$189.95
Availability: In Stock
The Crimson Trace RAD Micro Pro is a compact red dot sight engineered for shooters running carry guns and competition pistols with optics cuts. This ultra-slim open reflex sight fits the CT RAD Micro footprint—the same mounting pattern used by Shield RMS and JPoint sights—making it a direct drop-in for most modern slide cuts. The 3 MOA red dot is recessed behind a fully multi-coated lens, giving you a wide, unobstructed sight picture for fast target acquisition without the bulk of larger optics.
What sets the Micro Pro apart is its intelligent automation. The CT RADIANT ambient light sensor reads your environment and automatically adjusts dot brightness, so you're not squinting in dim light or blown out in bright sun. Motion-activated shake-to-wake keeps the sight powered down until you're ready to shoot, then the battery runs for over 20,000 hours on a single CR2016 cell. The sight powers itself down after two minutes of zero movement, extending battery life even further. The rear of the sight is cut with a notch to co-witness your front iron sight, giving you a backup aiming reference if the dot ever fails.
Built from 7075-series aerospace aluminum—30% stronger than the 6061-series used in many competitors—the Micro Pro is engineered to take abuse. The innovative top strap design deflects impact force if the sight gets dropped, reducing stress on the lens and optics. The whole platform is sealed to IPX4 water resistance, so it won't fail in rain or wet conditions. Windage and elevation are user-adjustable, letting you fine-tune zero at the range. Everything comes backed by Crimson Trace's CRIMSON Protect lifetime warranty.
If you're building a carry gun, duty rig, or competition pistol and want a sight that's fast, smart, and tough—without adding weight or height—the RAD Micro Pro delivers.
| Product Name | Crimson Trace RAD Micro Pro |
| Magnification | 1x |
| Objective Lens | 21mm |
| Reticle | 3 MOA red dot |
| Reticle Color | Red |
| Finish | Matte Black |
| Optical Coating | Fully multi-coated |
| Mount Footprint | CT RAD Micro (Shield RMS / JPoint compatible) |
| Construction Material | 7075-series aerospace aluminum |
| Water Resistance | IPX4 |
| Windage/Elevation | User adjustable |
| Battery Type | CR2016 |
| Battery Life | 20,000+ hours (2+ years typical use) |
| Battery Access | Bottom mount |
| Power Management | Motion sensor activation, 2-minute auto power-down |
| Ambient Light Sensor | CT RADIANT automatic brightness adjustment |
| Iron Sight Co-Witness | Notch cut in rear |
| Warranty | CRIMSON Protect lifetime warranty |
The RAD Micro Pro uses the CT RAD Micro footprint, which is also compatible with Shield RMS and JPoint mount patterns. This covers most modern compact and subcompact pistol slide cuts. Verify your slide's specific cut before ordering to ensure compatibility.
Yes. The rear of the sight is notched to co-witness with your front iron sight, giving you a reliable backup aiming reference if the electronic dot ever goes down.
The sight runs on a CR2016 battery with a rated life of 20,000+ hours—typically more than two years under normal use. The shake-to-wake motion sensor and automatic 2-minute power-down further extend battery life by keeping the sight off when you're not shooting.
The sight is sealed to IPX4 water resistance, meaning it can handle splashing and light rain. It is not submersible and should not be dunked or exposed to sustained water spray.
The RAD Micro Pro is built from 7075-series aerospace aluminum, 30% stronger than standard 6061-series, and features an innovative top strap design that deflects impact force away from the lens. This reduces stress on the optics and improves durability in the field, but no optic is indestructible—drops onto hard surfaces always carry some risk.
SKU: 114461095 • Width: 6.4in • Height: 4.9in • Depth: 8.4in • Weight: 0.5oz
Availability: In Stock
The Crimson Trace RAD Micro Pro is a compact red dot sight engineered for shooters running carry guns and competition pistols with optics cuts. This ultra-slim open reflex sight fits the CT RAD Micro footprint—the same mounting pattern used by Shield RMS and JPoint sights—making it a direct drop-in for most modern slide cuts. The 3 MOA red dot is recessed behind a fully multi-coated lens, giving you a wide, unobstructed sight picture for fast target acquisition without the bulk of larger optics.
What sets the Micro Pro apart is its intelligent automation. The CT RADIANT ambient light sensor reads your environment and automatically adjusts dot brightness, so you're not squinting in dim light or blown out in bright sun. Motion-activated shake-to-wake keeps the sight powered down until you're ready to shoot, then the battery runs for over 20,000 hours on a single CR2016 cell. The sight powers itself down after two minutes of zero movement, extending battery life even further. The rear of the sight is cut with a notch to co-witness your front iron sight, giving you a backup aiming reference if the dot ever fails.
Built from 7075-series aerospace aluminum—30% stronger than the 6061-series used in many competitors—the Micro Pro is engineered to take abuse. The innovative top strap design deflects impact force if the sight gets dropped, reducing stress on the lens and optics. The whole platform is sealed to IPX4 water resistance, so it won't fail in rain or wet conditions. Windage and elevation are user-adjustable, letting you fine-tune zero at the range. Everything comes backed by Crimson Trace's CRIMSON Protect lifetime warranty.
If you're building a carry gun, duty rig, or competition pistol and want a sight that's fast, smart, and tough—without adding weight or height—the RAD Micro Pro delivers.
| Product Name | Crimson Trace RAD Micro Pro |
| Magnification | 1x |
| Objective Lens | 21mm |
| Reticle | 3 MOA red dot |
| Reticle Color | Red |
| Finish | Matte Black |
| Optical Coating | Fully multi-coated |
| Mount Footprint | CT RAD Micro (Shield RMS / JPoint compatible) |
| Construction Material | 7075-series aerospace aluminum |
| Water Resistance | IPX4 |
| Windage/Elevation | User adjustable |
| Battery Type | CR2016 |
| Battery Life | 20,000+ hours (2+ years typical use) |
| Battery Access | Bottom mount |
| Power Management | Motion sensor activation, 2-minute auto power-down |
| Ambient Light Sensor | CT RADIANT automatic brightness adjustment |
| Iron Sight Co-Witness | Notch cut in rear |
| Warranty | CRIMSON Protect lifetime warranty |
The RAD Micro Pro uses the CT RAD Micro footprint, which is also compatible with Shield RMS and JPoint mount patterns. This covers most modern compact and subcompact pistol slide cuts. Verify your slide's specific cut before ordering to ensure compatibility.
Yes. The rear of the sight is notched to co-witness with your front iron sight, giving you a reliable backup aiming reference if the electronic dot ever goes down.
The sight runs on a CR2016 battery with a rated life of 20,000+ hours—typically more than two years under normal use. The shake-to-wake motion sensor and automatic 2-minute power-down further extend battery life by keeping the sight off when you're not shooting.
The sight is sealed to IPX4 water resistance, meaning it can handle splashing and light rain. It is not submersible and should not be dunked or exposed to sustained water spray.
The RAD Micro Pro is built from 7075-series aerospace aluminum, 30% stronger than standard 6061-series, and features an innovative top strap design that deflects impact force away from the lens. This reduces stress on the optics and improves durability in the field, but no optic is indestructible—drops onto hard surfaces always carry some risk.
SKU: 114461095 • Width: 6.4in • Height: 4.9in • Depth: 8.4in • Weight: 0.5oz