Crimson Trace114461609
Crimson Trace RAD Max Pro Reflex Red Dot Sight 1x 3 MOA with Picatinny Mount - Matte Black$339.95
Availability: In Stock
The Crimson Trace RAD Pro Reflex Red Dot Sight brings fast target acquisition and reliable performance to full-frame pistols equipped with optics-cut slides. Built around a 3 MOA red dot reticle and open reflex design, this matte black sight gives you a large, unobstructed aiming window—ideal for defensive shooting, competition, or range training where speed matters. The RAD Pro's smart sensor suite means you're not fumbling with controls: its motion detector wakes the sight when you pick up the gun, and ambient light sensing automatically adjusts dot brightness to match your environment, whether you're indoors or under direct sun.
Construction is where the RAD Pro earns its keep. Machined from 7075-series aerospace aluminum—30% stronger than standard 6061-spec rivals—the sight delivers serious durability without excess weight. The top strap design deflects impact energy if the sight takes a hard knock, and the recessed, fully multi-coated lens resists glare and protects against drops. IPX7 waterproofing, fog resistance, and shock tolerance round out a tough optic built to survive hard use. Battery life stretches beyond two years on a single CR2016, with an eight-hour auto-shutoff and manual on/off control via large, gloved-hand-friendly brightness buttons.
Installation is straightforward: the sight uses the CT RAD footprint and is compatible with Docter mounting systems. You also get a low-profile Picatinny rail adapter, so you can mount the Pro to most standard mil-spec rails if your slide doesn't have a factory cut. Windage and elevation are user-adjustable, letting you dial in your zero quickly. Textured side panels give you purchase when racking the slide without sacrificing grip comfort.
| Reticle Type | 3 MOA red dot |
| Magnification | 1x (non-magnified) |
| Mount Type | CT RAD footprint; Docter-compatible; includes low-profile Picatinny mount |
| Application | Full-frame pistols with optics-cut slides |
| Construction | 7075-series aerospace aluminum |
| Finish | Matte black |
| Battery Type | CR2016 |
| Battery Life | 20,000 hours (2+ years) |
| Brightness Control | Ambient light sensor; manual brightness buttons |
| Motion Sensor | CT Motion Sensor (shake-to-wake) |
| Auto-Shutoff | 2 minutes (no movement); 8 hours (continuous operation) |
| Windage & Elevation | User-adjustable |
| Durability Rating | IPX7 waterproof, fog-resistant, shock and impact-resistant |
| Lens | Recessed, fully multi-coated |
The RAD Pro is built for full-frame pistols with optics-cut slides. It mounts using the CT RAD footprint and is also compatible with Docter-footprint slides. An included low-profile Picatinny mount lets you install it on most standard mil-spec rails if your slide doesn't have a factory optics cut.
The CT Motion Sensor detects movement of your firearm and automatically powers on the sight when you pick it up—no fumbling with buttons before you draw. You can also manually turn the sight on or off using the side brightness buttons. If the gun sits motionless for 2 minutes, the sight powers down; continuous operation triggers an auto-shutoff after 8 hours to preserve battery life.
The RAD Pro comes with the sight itself and a low-profile Picatinny rail mount, so you have mounting options for optics-cut slides and standard mil-spec rails alike.
The RAD Pro features the CT Radiant Ambient Light Sensor, which automatically adjusts the dot's brightness to match your surroundings—low indoors, bright in sunlight—without you having to dial anything. You can also manually adjust brightness using the side buttons for added control.
SKU: 114460924 • Width: 3in • Height: 4.75in • Depth: 4.75in • Weight: 0.56oz
Availability: In Stock
The Crimson Trace RAD Pro Reflex Red Dot Sight brings fast target acquisition and reliable performance to full-frame pistols equipped with optics-cut slides. Built around a 3 MOA red dot reticle and open reflex design, this matte black sight gives you a large, unobstructed aiming window—ideal for defensive shooting, competition, or range training where speed matters. The RAD Pro's smart sensor suite means you're not fumbling with controls: its motion detector wakes the sight when you pick up the gun, and ambient light sensing automatically adjusts dot brightness to match your environment, whether you're indoors or under direct sun.
Construction is where the RAD Pro earns its keep. Machined from 7075-series aerospace aluminum—30% stronger than standard 6061-spec rivals—the sight delivers serious durability without excess weight. The top strap design deflects impact energy if the sight takes a hard knock, and the recessed, fully multi-coated lens resists glare and protects against drops. IPX7 waterproofing, fog resistance, and shock tolerance round out a tough optic built to survive hard use. Battery life stretches beyond two years on a single CR2016, with an eight-hour auto-shutoff and manual on/off control via large, gloved-hand-friendly brightness buttons.
Installation is straightforward: the sight uses the CT RAD footprint and is compatible with Docter mounting systems. You also get a low-profile Picatinny rail adapter, so you can mount the Pro to most standard mil-spec rails if your slide doesn't have a factory cut. Windage and elevation are user-adjustable, letting you dial in your zero quickly. Textured side panels give you purchase when racking the slide without sacrificing grip comfort.
| Reticle Type | 3 MOA red dot |
| Magnification | 1x (non-magnified) |
| Mount Type | CT RAD footprint; Docter-compatible; includes low-profile Picatinny mount |
| Application | Full-frame pistols with optics-cut slides |
| Construction | 7075-series aerospace aluminum |
| Finish | Matte black |
| Battery Type | CR2016 |
| Battery Life | 20,000 hours (2+ years) |
| Brightness Control | Ambient light sensor; manual brightness buttons |
| Motion Sensor | CT Motion Sensor (shake-to-wake) |
| Auto-Shutoff | 2 minutes (no movement); 8 hours (continuous operation) |
| Windage & Elevation | User-adjustable |
| Durability Rating | IPX7 waterproof, fog-resistant, shock and impact-resistant |
| Lens | Recessed, fully multi-coated |
The RAD Pro is built for full-frame pistols with optics-cut slides. It mounts using the CT RAD footprint and is also compatible with Docter-footprint slides. An included low-profile Picatinny mount lets you install it on most standard mil-spec rails if your slide doesn't have a factory optics cut.
The CT Motion Sensor detects movement of your firearm and automatically powers on the sight when you pick it up—no fumbling with buttons before you draw. You can also manually turn the sight on or off using the side brightness buttons. If the gun sits motionless for 2 minutes, the sight powers down; continuous operation triggers an auto-shutoff after 8 hours to preserve battery life.
The RAD Pro comes with the sight itself and a low-profile Picatinny rail mount, so you have mounting options for optics-cut slides and standard mil-spec rails alike.
The RAD Pro features the CT Radiant Ambient Light Sensor, which automatically adjusts the dot's brightness to match your surroundings—low indoors, bright in sunlight—without you having to dial anything. You can also manually adjust brightness using the side buttons for added control.
SKU: 114460924 • Width: 3in • Height: 4.75in • Depth: 4.75in • Weight: 0.56oz