Calculated Kinetics194201654
CALK DT CANIK RIVAL/SFX/TP9 FS RMR$58.99
Loading...
Loading...
Loading...
Availability: In Stock
The Calculated Kinetics CALK DT PLT is a precision optic mounting plate engineered for Canik handguns paired with Holosun K or RMSc footprint red dots. Whether you run a Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, or TP9 Elite Combat Executive, this plate delivers a superior mounting solution compared to factory options—one that accounts for real-world gun operation and longevity. Built with shooters who demand reliability and practical ergonomics in mind, the DOGTAG plate solves common pain points in optic mounting while maintaining clean sight picture alignment.
The plate incorporates a deflection table designed to prevent carbon buildup, a detail that extends your optic's service life and keeps performance consistent through thousands of rounds. The single-hand manipulation feature means you can stay in a proper shooting position while making adjustments—no fumbling or awkward grip changes needed. Rear iron sights are integrated into the design and positioned to give lower 1/5th co-witness with most optics, ensuring you've got a backup aiming solution that doesn't clutter your sight picture when the red dot is active.
Installation is straightforward: the package includes all hardware, a Torx bit for assembly, Vibratite threadlocker to keep fasteners secure, and an install card to walk you through the process. This is the kind of attention to detail you'd expect from a maker focused on duty and sport shooters rather than cutting corners to chase margin.
| Brand | Calculated Kinetics |
| Product Type | Optic Mounting Plate |
| Optic Footprint Compatibility | Holosun K / RMSc |
| Firearm Compatibility | Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, TP9 Elite Combat Executive |
| Sight Witness Height | Lower 1/5th co-witness (with most optics) |
| Included Hardware | Mounting fasteners, Torx bit, Vibratite threadlocker, installation card |
The CALK DT PLT fits Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, and TP9 Elite Combat Executive. It's designed for Holosun K and RMSc footprint optics, including the EPS, EPS Carry, 407k, 507k, and Mecanik M04, plus any other optic that shares the RMSc mounting footprint.
You get the mounting plate, all necessary hardware for installation, a Torx bit for assembly, Vibratite threadlocker to secure fasteners, and an installation card with step-by-step instructions.
The built-in deflection table is designed to prevent carbon fouling from accumulating inside the mounting area, which helps keep your optic functioning reliably over extended use and protects the mounting surface from wear.
Yes. The plate is engineered to allow single-hand manipulation of the optic, meaning you can make windage and elevation adjustments without changing your grip or breaking position.
SKU: 194201651 • Width: 3in • Height: 1.5in • Depth: 6.75in • Weight: 2oz
Availability: In Stock
The Calculated Kinetics CALK DT PLT is a precision optic mounting plate engineered for Canik handguns paired with Holosun K or RMSc footprint red dots. Whether you run a Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, or TP9 Elite Combat Executive, this plate delivers a superior mounting solution compared to factory options—one that accounts for real-world gun operation and longevity. Built with shooters who demand reliability and practical ergonomics in mind, the DOGTAG plate solves common pain points in optic mounting while maintaining clean sight picture alignment.
The plate incorporates a deflection table designed to prevent carbon buildup, a detail that extends your optic's service life and keeps performance consistent through thousands of rounds. The single-hand manipulation feature means you can stay in a proper shooting position while making adjustments—no fumbling or awkward grip changes needed. Rear iron sights are integrated into the design and positioned to give lower 1/5th co-witness with most optics, ensuring you've got a backup aiming solution that doesn't clutter your sight picture when the red dot is active.
Installation is straightforward: the package includes all hardware, a Torx bit for assembly, Vibratite threadlocker to keep fasteners secure, and an install card to walk you through the process. This is the kind of attention to detail you'd expect from a maker focused on duty and sport shooters rather than cutting corners to chase margin.
| Brand | Calculated Kinetics |
| Product Type | Optic Mounting Plate |
| Optic Footprint Compatibility | Holosun K / RMSc |
| Firearm Compatibility | Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, TP9 Elite Combat Executive |
| Sight Witness Height | Lower 1/5th co-witness (with most optics) |
| Included Hardware | Mounting fasteners, Torx bit, Vibratite threadlocker, installation card |
The CALK DT PLT fits Canik Rival, Rival SFX, Rival Steel, TP9 Full Size, TP9 Elite Combat, and TP9 Elite Combat Executive. It's designed for Holosun K and RMSc footprint optics, including the EPS, EPS Carry, 407k, 507k, and Mecanik M04, plus any other optic that shares the RMSc mounting footprint.
You get the mounting plate, all necessary hardware for installation, a Torx bit for assembly, Vibratite threadlocker to secure fasteners, and an installation card with step-by-step instructions.
The built-in deflection table is designed to prevent carbon fouling from accumulating inside the mounting area, which helps keep your optic functioning reliably over extended use and protects the mounting surface from wear.
Yes. The plate is engineered to allow single-hand manipulation of the optic, meaning you can make windage and elevation adjustments without changing your grip or breaking position.
SKU: 194201651 • Width: 3in • Height: 1.5in • Depth: 6.75in • Weight: 2oz