Calculated Kinetics194201656
CALK DT PLT METE/TTI CBT HLSN K/RMSC$58.99
Availability: In Stock
The Calculated Kinetics DOGTAG mount plate for Glock MOS hosts is purpose-built to pair Holosun 407K, 507K, EPS Carry, and SCS Carry optics with full-size Glock Gen 4 and Gen 5 MOS-pattern slides. Unlike generic Glock optic plates, the DOGTAG's multifaceted design tackles real-world problems that shooters encounter: gas blowback onto your glass, optic shift, and the risk of damaging your red dot during emergency one-handed manipulation. Whether you run suppressed or unsuppressed, this mount earns its place on your duty or carry gun.
The engineering here is thoughtful. The gas deflection table on the front of the plate acts as a barrier against carbon buildup and fouling—a game-changer if you're shooting cans or pushing volume downrange. That same deflection geometry also serves as a tactile action point: if you're ever forced to operate your Glock one-handed, you can manipulate the slide using the plate itself, leaving your optic out of harm's way. The tight offset between optic and slide prevents any shift or movement once secured, keeping your zero rock solid through the round count.
Installation is straightforward. The kit includes all necessary hardware, Torx bits for secure fastening, Vibratite threadlocker to prevent loosening under recoil, and clear instructions. No gunsmithing required—this is a direct bolt-on for MOS-equipped Glocks.
| Brand | Calculated Kinetics |
| Mount Type | Glock MOS Optic Plate |
| Compatible Glock Models | Full-size Gen 4 and Gen 5 MOS (9mm) |
| Compatible Optics | Holosun 407K, 507K, EPS Carry, SCS Carry |
| Material | Anodized aluminum |
| Included Accessories | Hardware, Torx bits, Vibratite, instructions |
Yes, if you have a full-size Glock Gen 4 or Gen 5 with MOS pattern milling. The DOGTAG is designed specifically for these models in 9mm. Compact or subcompact MOS versions are not compatible with this mount.
The DOGTAG is compatible with the Holosun 407K, 507K, EPS Carry, and SCS Carry models. If you own a different Holosun footprint, this plate is not the right fit.
Yes. The gas deflection table is specifically engineered to reduce carbon and fouling buildup on your optic glass when running suppressed—a significant advantage if you shoot cans regularly.
The kit includes the mount plate itself, all mounting hardware, the necessary Torx bits for installation, Vibratite threadlocker to secure fasteners, and instructions. You'll have everything needed for a clean install.
SKU: 194201657 • Width: 3in • Height: 1.25in • Depth: 6.75in • Weight: 2oz
Availability: In Stock
The Calculated Kinetics DOGTAG mount plate for Glock MOS hosts is purpose-built to pair Holosun 407K, 507K, EPS Carry, and SCS Carry optics with full-size Glock Gen 4 and Gen 5 MOS-pattern slides. Unlike generic Glock optic plates, the DOGTAG's multifaceted design tackles real-world problems that shooters encounter: gas blowback onto your glass, optic shift, and the risk of damaging your red dot during emergency one-handed manipulation. Whether you run suppressed or unsuppressed, this mount earns its place on your duty or carry gun.
The engineering here is thoughtful. The gas deflection table on the front of the plate acts as a barrier against carbon buildup and fouling—a game-changer if you're shooting cans or pushing volume downrange. That same deflection geometry also serves as a tactile action point: if you're ever forced to operate your Glock one-handed, you can manipulate the slide using the plate itself, leaving your optic out of harm's way. The tight offset between optic and slide prevents any shift or movement once secured, keeping your zero rock solid through the round count.
Installation is straightforward. The kit includes all necessary hardware, Torx bits for secure fastening, Vibratite threadlocker to prevent loosening under recoil, and clear instructions. No gunsmithing required—this is a direct bolt-on for MOS-equipped Glocks.
| Brand | Calculated Kinetics |
| Mount Type | Glock MOS Optic Plate |
| Compatible Glock Models | Full-size Gen 4 and Gen 5 MOS (9mm) |
| Compatible Optics | Holosun 407K, 507K, EPS Carry, SCS Carry |
| Material | Anodized aluminum |
| Included Accessories | Hardware, Torx bits, Vibratite, instructions |
Yes, if you have a full-size Glock Gen 4 or Gen 5 with MOS pattern milling. The DOGTAG is designed specifically for these models in 9mm. Compact or subcompact MOS versions are not compatible with this mount.
The DOGTAG is compatible with the Holosun 407K, 507K, EPS Carry, and SCS Carry models. If you own a different Holosun footprint, this plate is not the right fit.
Yes. The gas deflection table is specifically engineered to reduce carbon and fouling buildup on your optic glass when running suppressed—a significant advantage if you shoot cans regularly.
The kit includes the mount plate itself, all mounting hardware, the necessary Torx bits for installation, Vibratite threadlocker to secure fasteners, and instructions. You'll have everything needed for a clean install.
SKU: 194201657 • Width: 3in • Height: 1.25in • Depth: 6.75in • Weight: 2oz