Breek Arms194201830
Breek Arms BRK530FDE Warhammer Mod2 AR-10/LR-308 FDE 7075-T6 Aluminum Ambidextrous$64.99
Availability: In Stock
The Breek Arms BRK530 Warhammer Mod2 is an ambidextrous charging handle built for shooters running AR-10 and LR-308 platforms who want faster, more reliable operation without factory-stock limitations. If you're working with a large optic, shooting suppressed, or just need a faster reload in gloved conditions, this handle gives you the control of oversize levers on both sides, textured grooves for grip, and gas-management features that actually work. Machined from 7075-T6 aluminum and hard-coat anodized, it's a drop-in upgrade that weighs just over an ounce and requires no gunsmith—simply swap it for your factory handle and go.
The Mod2 design improves on the original with specific attention to suppressor use. Relief cuts on the stem help direct gas away from your face, and the taller rear shelf blocks more of what tries to come straight back. This matters whether you're running a can or just want a cleaner shooting experience in close-quarters training or hunting. The set-back latches don't interfere with large optics, so you're not forced to choose between a robust sight picture and smooth charging.
Compatibility is critical: this handle is built for DPMS Gen1 and Armalite AR10-pattern uppers. That covers Aero M5, Knights Armament SR25, Daniel Defense DD5 (V3, V4, V5), STAG-10, Armalite AR10, and many others in that family. If your upper is DPMS Gen2, SIG, Ruger, Savage, Smith & Wesson, or other modern platforms listed in the exclusions, this isn't your part—verify your platform before ordering.
Made in America, the Warhammer Mod2 is the kind of practical upgrade that lives up to Breek Arms' reputation: solid engineering, real performance gain, and no unnecessary cost.
| Brand | Breek Arms |
| Model | BRK530 Warhammer Mod2 |
| Platform Compatibility | AR-10 / LR-308 (DPMS Gen1, Armalite AR10) |
| Material | 7075-T6 Aluminum (handle and latches) |
| Finish | Type III Hard-Coat Anodized Black |
| Width (Handle to Handle) | 2.78 inches |
| Weight | 1.1 oz |
| Configuration | Ambidextrous |
| Installation | Drop-in; no gunsmith required |
| Origin | Made in America |
The Warhammer Mod2 is designed for DPMS Gen1 and Armlite AR10-pattern uppers. Confirmed compatible platforms include Aero M5, Knights Armament SR25, Daniel Defense DD5 (V3, V4, V5), STAG-10, Armalite AR10, and others using those standards. It is NOT compatible with DPMS Gen2, SIG716, Ruger SFAR, Savage MSR10, Smith & Wesson M&P10, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE, or other Gen2-style uppers. Verify your upper's platform before purchasing.
Yes. The Mod2 specifically incorporates gas-management features for suppressed shooting: relief cuts on the top and bottom of the stem direct extra gas sideways and away from your face, and the increased height of the rear shelf better blocks gas coming straight back. This makes it especially effective when running a suppressor.
The set-back latches are designed to work great with large optics and scopes, so interference is minimal compared to standard or forward-raked handles.
No. The Warhammer Mod2 is a drop-in replacement for your factory charging handle. Simply remove the old handle and install the new one—no additional tools or modifications are needed.
SKU: 194201866 • Width: 3.7in • Height: 0.7in • Depth: 9.9in • Weight: 0.11oz
Availability: In Stock
The Breek Arms BRK530 Warhammer Mod2 is an ambidextrous charging handle built for shooters running AR-10 and LR-308 platforms who want faster, more reliable operation without factory-stock limitations. If you're working with a large optic, shooting suppressed, or just need a faster reload in gloved conditions, this handle gives you the control of oversize levers on both sides, textured grooves for grip, and gas-management features that actually work. Machined from 7075-T6 aluminum and hard-coat anodized, it's a drop-in upgrade that weighs just over an ounce and requires no gunsmith—simply swap it for your factory handle and go.
The Mod2 design improves on the original with specific attention to suppressor use. Relief cuts on the stem help direct gas away from your face, and the taller rear shelf blocks more of what tries to come straight back. This matters whether you're running a can or just want a cleaner shooting experience in close-quarters training or hunting. The set-back latches don't interfere with large optics, so you're not forced to choose between a robust sight picture and smooth charging.
Compatibility is critical: this handle is built for DPMS Gen1 and Armalite AR10-pattern uppers. That covers Aero M5, Knights Armament SR25, Daniel Defense DD5 (V3, V4, V5), STAG-10, Armalite AR10, and many others in that family. If your upper is DPMS Gen2, SIG, Ruger, Savage, Smith & Wesson, or other modern platforms listed in the exclusions, this isn't your part—verify your platform before ordering.
Made in America, the Warhammer Mod2 is the kind of practical upgrade that lives up to Breek Arms' reputation: solid engineering, real performance gain, and no unnecessary cost.
| Brand | Breek Arms |
| Model | BRK530 Warhammer Mod2 |
| Platform Compatibility | AR-10 / LR-308 (DPMS Gen1, Armalite AR10) |
| Material | 7075-T6 Aluminum (handle and latches) |
| Finish | Type III Hard-Coat Anodized Black |
| Width (Handle to Handle) | 2.78 inches |
| Weight | 1.1 oz |
| Configuration | Ambidextrous |
| Installation | Drop-in; no gunsmith required |
| Origin | Made in America |
The Warhammer Mod2 is designed for DPMS Gen1 and Armlite AR10-pattern uppers. Confirmed compatible platforms include Aero M5, Knights Armament SR25, Daniel Defense DD5 (V3, V4, V5), STAG-10, Armalite AR10, and others using those standards. It is NOT compatible with DPMS Gen2, SIG716, Ruger SFAR, Savage MSR10, Smith & Wesson M&P10, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE, or other Gen2-style uppers. Verify your upper's platform before purchasing.
Yes. The Mod2 specifically incorporates gas-management features for suppressed shooting: relief cuts on the top and bottom of the stem direct extra gas sideways and away from your face, and the increased height of the rear shelf better blocks gas coming straight back. This makes it especially effective when running a suppressor.
The set-back latches are designed to work great with large optics and scopes, so interference is minimal compared to standard or forward-raked handles.
No. The Warhammer Mod2 is a drop-in replacement for your factory charging handle. Simply remove the old handle and install the new one—no additional tools or modifications are needed.
SKU: 194201866 • Width: 3.7in • Height: 0.7in • Depth: 9.9in • Weight: 0.11oz