Bravo Company152828640
Bcm At Optic Mount Lower 1/3 - For Aimpoint Micro T2$119.00
Availability: In Stock
The Bravo Company AT Optic Mount 1.93" High is a rock-solid red dot mount purpose-built for the Aimpoint Micro T2 and T-series optics. This isn't generic hardware—BCM engineered the AT mount to handle the demands of duty, competition, and serious field use where your zero has to survive recoil, rough handling, and worst-case scenarios. If you're running an Aimpoint T2 on an AR or other Picatinny-railed rifle, this 1.93" mounting height positions your optic for lower-third co-witness with standard backup sights, keeping you combat-ready without compromise.
The engineering here is deliberate and proven. BCM's Angled Torque (A/T) clamp uses a patented triangulating design that applies clamping force at an angle to the rail, delivering roughly twice the hold-down force of traditional horizontal clamps. A hardened steel clamp, nitride-coated nut, and serrated locking spring-washer keep the mount locked tight even after hard use. The 7075-T6 billet aluminum body is hard-coat anodized to Mil-Spec (Mil-A-8625F), and BCM engineered in multiple integral recoil lugs to keep your zero from walking. Every component is designed to fail last—or better yet, not at all.
At just 2.15 oz, the AT mount stays light without cutting corners on durability. The low-profile, snag-free design won't hang up on gear or slow you down. Everything is manufactured in America and built to exceed military standards that have stood for decades. If you demand a mount that will hold zero through thousands of rounds and handle whatever you throw at it, the BCM AT 1.93" is the real deal.
| Manufacturer | Bravo Company Manufacturing |
| Optic Compatibility | Aimpoint Micro T2, Aimpoint T-1, Aimpoint CompM5 series |
| Mount Height | 1.93 inches |
| Co-Witness Height | Lower-third co-witness with standard backup sights |
| Material | 7075-T6 billet aluminum (body); hardened steel (clamp, nut) |
| Finish | Hard-coat anodized per Mil-A-8625F; nitride-coated steel hardware |
| Rail Interface | Picatinny (MIL-STD-1913) |
| Weight | 2.15 oz |
| Design | Patented Angled Torque (A/T) clamp; integral recoil lugs |
Yes. The BCM AT 1.93" mount is purpose-designed for the Aimpoint Micro T2, as well as Aimpoint T-1 and CompM5 series optics.
This mount sits 1.93 inches high and positions your optic for lower-third co-witness with standard backup iron sights, so you can see your irons through or below the red dot.
The BCM AT mount is built for Picatinny rails (MIL-STD-1913), which is the standard on AR-15s and most modern tactical rifles.
BCM's patented Angled Torque clamp applies triangulating force across the Picatinny rail, which creates approximately twice the clamping force of a traditional horizontal clamp design. This stronger lock-up preserves zero under recoil and hard use.
SKU: 152828671 • Width: 3.85in • Height: 3in • Depth: 4.5in • Weight: 0.33oz
Availability: In Stock
The Bravo Company AT Optic Mount 1.93" High is a rock-solid red dot mount purpose-built for the Aimpoint Micro T2 and T-series optics. This isn't generic hardware—BCM engineered the AT mount to handle the demands of duty, competition, and serious field use where your zero has to survive recoil, rough handling, and worst-case scenarios. If you're running an Aimpoint T2 on an AR or other Picatinny-railed rifle, this 1.93" mounting height positions your optic for lower-third co-witness with standard backup sights, keeping you combat-ready without compromise.
The engineering here is deliberate and proven. BCM's Angled Torque (A/T) clamp uses a patented triangulating design that applies clamping force at an angle to the rail, delivering roughly twice the hold-down force of traditional horizontal clamps. A hardened steel clamp, nitride-coated nut, and serrated locking spring-washer keep the mount locked tight even after hard use. The 7075-T6 billet aluminum body is hard-coat anodized to Mil-Spec (Mil-A-8625F), and BCM engineered in multiple integral recoil lugs to keep your zero from walking. Every component is designed to fail last—or better yet, not at all.
At just 2.15 oz, the AT mount stays light without cutting corners on durability. The low-profile, snag-free design won't hang up on gear or slow you down. Everything is manufactured in America and built to exceed military standards that have stood for decades. If you demand a mount that will hold zero through thousands of rounds and handle whatever you throw at it, the BCM AT 1.93" is the real deal.
| Manufacturer | Bravo Company Manufacturing |
| Optic Compatibility | Aimpoint Micro T2, Aimpoint T-1, Aimpoint CompM5 series |
| Mount Height | 1.93 inches |
| Co-Witness Height | Lower-third co-witness with standard backup sights |
| Material | 7075-T6 billet aluminum (body); hardened steel (clamp, nut) |
| Finish | Hard-coat anodized per Mil-A-8625F; nitride-coated steel hardware |
| Rail Interface | Picatinny (MIL-STD-1913) |
| Weight | 2.15 oz |
| Design | Patented Angled Torque (A/T) clamp; integral recoil lugs |
Yes. The BCM AT 1.93" mount is purpose-designed for the Aimpoint Micro T2, as well as Aimpoint T-1 and CompM5 series optics.
This mount sits 1.93 inches high and positions your optic for lower-third co-witness with standard backup iron sights, so you can see your irons through or below the red dot.
The BCM AT mount is built for Picatinny rails (MIL-STD-1913), which is the standard on AR-15s and most modern tactical rifles.
BCM's patented Angled Torque clamp applies triangulating force across the Picatinny rail, which creates approximately twice the clamping force of a traditional horizontal clamp design. This stronger lock-up preserves zero under recoil and hard use.
SKU: 152828671 • Width: 3.85in • Height: 3in • Depth: 4.5in • Weight: 0.33oz