Geissele Automatics167526972
Geissele Automatics Aimpoint Compm5S Optic Mount 1.93'' High Black$155.00
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Battle Arms Development Lightweight Aimpoint Optic Mount 1.93" is a purpose-built riser for shooters running Aimpoint footprint red dots who want absolute co-witness height without the weight penalty. BAD Inc. engineered this mount to sit at 1.93" above the rail—the sweet spot for irons-up shooting on modern tactical and hunting rifles—while keeping your sight picture uncluttered and your rifle balanced. If you're building a duty gun, patrol rifle, or hunting platform where every ounce matters and you refuse to compromise on optics real estate, this is the kind of mount that earns its place on the gun.
Built from billet 7075-T6 aluminum and finished in hard coat Type III anodizing, this is a no-fuss single-piece design that clamps securely to Mil-Spec Picatinny rail and stays put. The rock-and-tighten installation means you're not wrestling with complex tooling or fiddling with alignment—mount it, torque it, and move on to actual shooting. Made in the USA, it reflects the kind of attention to detail you'd expect from a firm focused on serious small arms engineering.
At 1.06 ounces for the mount alone (1.31 ounces with hardware), this riser won't bloat your gun's weight budget. That matters whether you're hauling your rifle through the backcountry, running drills on the clock, or just prefer a rifle that doesn't feel like it's pulling your shoulder down by noon. It's a straightforward answer to a real problem: how to mount a red dot at the right height without dragging along unnecessary metal.
| Mount Height | 1.93" |
| Optic Footprint | Aimpoint |
| Co-Witness | Absolute |
| Weight (Mount) | 1.06 oz |
| Weight (Mount + Hardware) | 1.31 oz |
| Material | 7075-T6 Aluminum |
| Finish | Hard Coat Type III Anodizing, Black |
| Rail Interface | Mil-Spec Picatinny |
| Design | Single-piece CNC machined |
| Country of Origin | USA |
This mount is built to Aimpoint footprint specs. Confirm your specific red dot matches the Aimpoint footprint before ordering if you're unsure.
1.93" is the absolute co-witness height, meaning your iron sights (front and rear) will align with your red dot's center. You can aim using irons alone if your optic fails, or use the red dot with irons as a backup reference—a proven combination on duty and hunting rifles.
The mount uses a simple rock-and-tighten system on standard Mil-Spec Picatinny rail. Place it on your rail, align it, and tighten. No special tools or fiddly screws required.
No. The mount itself weighs just 1.06 ounces, or 1.31 ounces with hardware—designed specifically for lightweight builds and rigs where every ounce counts.
SKU: 114464715 • Width: 3in • Height: 1.25in • Depth: 5.5in • Weight: 0.13oz
Availability: In Stock
Current Stock: Out of stock
The Battle Arms Development Lightweight Aimpoint Optic Mount 1.93" is a purpose-built riser for shooters running Aimpoint footprint red dots who want absolute co-witness height without the weight penalty. BAD Inc. engineered this mount to sit at 1.93" above the rail—the sweet spot for irons-up shooting on modern tactical and hunting rifles—while keeping your sight picture uncluttered and your rifle balanced. If you're building a duty gun, patrol rifle, or hunting platform where every ounce matters and you refuse to compromise on optics real estate, this is the kind of mount that earns its place on the gun.
Built from billet 7075-T6 aluminum and finished in hard coat Type III anodizing, this is a no-fuss single-piece design that clamps securely to Mil-Spec Picatinny rail and stays put. The rock-and-tighten installation means you're not wrestling with complex tooling or fiddling with alignment—mount it, torque it, and move on to actual shooting. Made in the USA, it reflects the kind of attention to detail you'd expect from a firm focused on serious small arms engineering.
At 1.06 ounces for the mount alone (1.31 ounces with hardware), this riser won't bloat your gun's weight budget. That matters whether you're hauling your rifle through the backcountry, running drills on the clock, or just prefer a rifle that doesn't feel like it's pulling your shoulder down by noon. It's a straightforward answer to a real problem: how to mount a red dot at the right height without dragging along unnecessary metal.
| Mount Height | 1.93" |
| Optic Footprint | Aimpoint |
| Co-Witness | Absolute |
| Weight (Mount) | 1.06 oz |
| Weight (Mount + Hardware) | 1.31 oz |
| Material | 7075-T6 Aluminum |
| Finish | Hard Coat Type III Anodizing, Black |
| Rail Interface | Mil-Spec Picatinny |
| Design | Single-piece CNC machined |
| Country of Origin | USA |
This mount is built to Aimpoint footprint specs. Confirm your specific red dot matches the Aimpoint footprint before ordering if you're unsure.
1.93" is the absolute co-witness height, meaning your iron sights (front and rear) will align with your red dot's center. You can aim using irons alone if your optic fails, or use the red dot with irons as a backup reference—a proven combination on duty and hunting rifles.
The mount uses a simple rock-and-tighten system on standard Mil-Spec Picatinny rail. Place it on your rail, align it, and tighten. No special tools or fiddly screws required.
No. The mount itself weighs just 1.06 ounces, or 1.31 ounces with hardware—designed specifically for lightweight builds and rigs where every ounce counts.
SKU: 114464715 • Width: 3in • Height: 1.25in • Depth: 5.5in • Weight: 0.13oz