$99.99
Loading...
Loading...
Loading...
Availability: In Stock
The Banish 5895 Thread Adapter converts 1/2x28 thread pitch barrels to 5/8x24, letting you mount suppressors designed for larger-diameter threaded muzzles on rifles with smaller threads. This is a practical solution when your suppressor and barrel don't match — rather than buying new hardware, a quality adapter bridges that gap reliably. Built by Silencer Central using CNC precision to Class 3 dealer standards, this adapter eliminates the tolerance stacking and misalignment issues that plague cheaper alternatives online. A poorly made adapter can cause baffle strikes inside your suppressor, damaging an expensive piece of equipment; the Banish 5895 is engineered to prevent that.
Stainless steel construction might cost more upfront, but it's worth the investment. Steel expands and contracts at different rates than your barrel as it heats and cools during shooting; stainless steel's thermal characteristics minimize that mismatch, keeping the adapter seated correctly shot after shot. The wrench flats are forged from 1040 steel, blued to hold lubricant and resist corrosion. Every detail — from the CNC manufacturing to the finishing — reflects Banish's commitment to precision and durability.
Installation is straightforward: thread the 1/2x28 end onto your barrel, then thread your 5/8x24 suppressor onto the adapter's larger diameter. The generous wrench flats make it easy to get a solid grip without marring the finish. Whether you're running a precision rifle at distance, hunting, or hitting the range, this adapter lets you use the suppressor you already own without compromise.
| Length | 0.78 inches |
| Diameter | 0.86 inches |
| Material | Stainless steel (body); 1040 steel (wrench flats, blued) |
| Finish | Black Parkerized |
| Thread Conversion | 1/2x28 (barrel end) to 5/8x24 (suppressor end) |
Yes — thread the 1/2x28 end onto your barrel and the 5/8x24 end onto your suppressor. The adapter bridges the difference between the two thread pitches.
Many low-cost adapters have loose tolerances that cause misalignment, leading to baffle strikes inside the suppressor. The Banish 5895 is CNC-manufactured to Class 3 dealer standards with tight tolerances, preventing those alignment issues and protecting your suppressor.
Stainless steel expands and contracts at a rate closer to your barrel, so the adapter stays seated correctly as temperatures change during shooting. It also resists corrosion better than regular steel.
Yes — the wrench flats allow you to grip and tighten the adapter securely onto both your barrel and suppressor without damaging the finish.
SKU: 144600691 • Width: 3in • Height: 0.8in • Depth: 4.8in • Weight: 0.035oz
Availability: In Stock
The Banish 5895 Thread Adapter converts 1/2x28 thread pitch barrels to 5/8x24, letting you mount suppressors designed for larger-diameter threaded muzzles on rifles with smaller threads. This is a practical solution when your suppressor and barrel don't match — rather than buying new hardware, a quality adapter bridges that gap reliably. Built by Silencer Central using CNC precision to Class 3 dealer standards, this adapter eliminates the tolerance stacking and misalignment issues that plague cheaper alternatives online. A poorly made adapter can cause baffle strikes inside your suppressor, damaging an expensive piece of equipment; the Banish 5895 is engineered to prevent that.
Stainless steel construction might cost more upfront, but it's worth the investment. Steel expands and contracts at different rates than your barrel as it heats and cools during shooting; stainless steel's thermal characteristics minimize that mismatch, keeping the adapter seated correctly shot after shot. The wrench flats are forged from 1040 steel, blued to hold lubricant and resist corrosion. Every detail — from the CNC manufacturing to the finishing — reflects Banish's commitment to precision and durability.
Installation is straightforward: thread the 1/2x28 end onto your barrel, then thread your 5/8x24 suppressor onto the adapter's larger diameter. The generous wrench flats make it easy to get a solid grip without marring the finish. Whether you're running a precision rifle at distance, hunting, or hitting the range, this adapter lets you use the suppressor you already own without compromise.
| Length | 0.78 inches |
| Diameter | 0.86 inches |
| Material | Stainless steel (body); 1040 steel (wrench flats, blued) |
| Finish | Black Parkerized |
| Thread Conversion | 1/2x28 (barrel end) to 5/8x24 (suppressor end) |
Yes — thread the 1/2x28 end onto your barrel and the 5/8x24 end onto your suppressor. The adapter bridges the difference between the two thread pitches.
Many low-cost adapters have loose tolerances that cause misalignment, leading to baffle strikes inside the suppressor. The Banish 5895 is CNC-manufactured to Class 3 dealer standards with tight tolerances, preventing those alignment issues and protecting your suppressor.
Stainless steel expands and contracts at a rate closer to your barrel, so the adapter stays seated correctly as temperatures change during shooting. It also resists corrosion better than regular steel.
Yes — the wrench flats allow you to grip and tighten the adapter securely onto both your barrel and suppressor without damaging the finish.
SKU: 144600691 • Width: 3in • Height: 0.8in • Depth: 4.8in • Weight: 0.035oz