Banish144600021
Banish(Silencer Central) 4787 Pistons Banish 45/46 1/2X28$89.99
Availability: In Stock
The Banish Direct Mount Thread adapter is a titanium HUB mount designed to connect your rifle to any industry-standard HUB-compatible suppressor. If you're running a Banish 46 or other suppressor built to the 1.375x24 HUB specification, this direct-thread mount eliminates the need for a separate adapter—it threads straight onto your muzzle in 1/2x28, securing your can with a clean, compact setup. Built from 100% titanium, it's lightweight enough for backcountry hunts and tough enough for repeated installation and removal in the field or at the range.
The external hex design means you can install and remove the mount without special tools—just hand-tight or a wrench if you need it. This is the kind of simplicity that matters when you're troubleshooting gear in the dark or swapping between rifles. Titanium handles the heat cycle after cycle without degrading, so you're not replacing this thing every season. Whether you're building a precision rifle, a hunting rig, or a versatile multi-gun setup, a quality direct-thread mount is foundational to a reliable suppressor system.
Compatibility is straightforward: if your suppressor is HUB-mount compatible and your rifle is chambered in a caliber that accepts 1/2x28 threads, you're set. Check your suppressor's specs to confirm HUB mounting, and verify your barrel is already threaded 1/2x28—this adapter threads on, it doesn't change your barrel.
| Material | Titanium |
| Thread Pitch | 1/2x28 |
| HUB Specification | 1.375x24 |
| Mount Type | Direct Thread |
The Banish Direct Mount Thread adapter is compatible with any suppressor built to the industry-standard HUB specification (1.375x24). This includes Banish HUB-mount suppressors like the Banish 46, Banish 30-V2, and Banish Backcountry models. Always confirm your specific suppressor is HUB-compatible before ordering.
The external hex design allows hand-tight installation and removal. You can use a wrench if you prefer a more secure fit, but no special tools are required.
Your barrel must be threaded 1/2x28. This adapter threads directly onto that muzzle—it does not change your barrel's thread pattern. Verify your barrel threading before purchase.
Titanium is significantly lighter than steel, resistant to heat cycling, and maintains its integrity through repeated installation and removal. For hunters and shooters who move between rifles or swap suppressors frequently, titanium reliability and weight savings add up.
SKU: 144598860 • Width: 3in • Height: 0.7in • Depth: 4.8in • Weight: 0.08oz
Availability: In Stock
The Banish Direct Mount Thread adapter is a titanium HUB mount designed to connect your rifle to any industry-standard HUB-compatible suppressor. If you're running a Banish 46 or other suppressor built to the 1.375x24 HUB specification, this direct-thread mount eliminates the need for a separate adapter—it threads straight onto your muzzle in 1/2x28, securing your can with a clean, compact setup. Built from 100% titanium, it's lightweight enough for backcountry hunts and tough enough for repeated installation and removal in the field or at the range.
The external hex design means you can install and remove the mount without special tools—just hand-tight or a wrench if you need it. This is the kind of simplicity that matters when you're troubleshooting gear in the dark or swapping between rifles. Titanium handles the heat cycle after cycle without degrading, so you're not replacing this thing every season. Whether you're building a precision rifle, a hunting rig, or a versatile multi-gun setup, a quality direct-thread mount is foundational to a reliable suppressor system.
Compatibility is straightforward: if your suppressor is HUB-mount compatible and your rifle is chambered in a caliber that accepts 1/2x28 threads, you're set. Check your suppressor's specs to confirm HUB mounting, and verify your barrel is already threaded 1/2x28—this adapter threads on, it doesn't change your barrel.
| Material | Titanium |
| Thread Pitch | 1/2x28 |
| HUB Specification | 1.375x24 |
| Mount Type | Direct Thread |
The Banish Direct Mount Thread adapter is compatible with any suppressor built to the industry-standard HUB specification (1.375x24). This includes Banish HUB-mount suppressors like the Banish 46, Banish 30-V2, and Banish Backcountry models. Always confirm your specific suppressor is HUB-compatible before ordering.
The external hex design allows hand-tight installation and removal. You can use a wrench if you prefer a more secure fit, but no special tools are required.
Your barrel must be threaded 1/2x28. This adapter threads directly onto that muzzle—it does not change your barrel's thread pattern. Verify your barrel threading before purchase.
Titanium is significantly lighter than steel, resistant to heat cycling, and maintains its integrity through repeated installation and removal. For hunters and shooters who move between rifles or swap suppressors frequently, titanium reliability and weight savings add up.
SKU: 144598860 • Width: 3in • Height: 0.7in • Depth: 4.8in • Weight: 0.08oz