Arisaka Defense114465742
Arisaka Offset Optic Mount PLT 14 - 509 Tall | Precision Tactical Accessory for Enhanced Target Acquisition$25.00
Availability: In Stock
The Arisaka Offset Optic Plate 5 for Aimpoint is a precision mounting solution designed for shooters running Aimpoint Micro (T1, T2, H1, H2) red dots, SIG Romeo 4 and 5, or Holosun HS403, HS503, HS515, and HS530 optics on AR15s with magnified scopes. This modular plate pairs with the Arisaka Defense offset optic base to mount your red dot at either 35 or 45 degrees, positioning your backup or co-witness optic where you need it—without the bulk or the backup battery drain of a permanent one-sight setup.
Built from 6061-T6 aluminum and MIL-spec hard coat anodized, Plate 5 is engineered for the durability your rifle demands. Whether you're setting up a precision DMR, a hunting rifle with a primary scope, or a duty carbine, this plate lets you keep your red dot accessible without compromising sight picture through your primary optic. The 35-degree angle works with standard-height scope mounts (1.5" to 1.8"); the modular design means you can upgrade plates later if your optic collection grows.
The base and plates are sold separately or together, so you can build your offset setup piece by piece or swap plates as your gear evolves. CNC machined and hard anodized for zero wobble, the Arisaka system maintains the lower 1/3 co-witness height that keeps you in the fight when canting the rifle, and the plates are reversible for left or right side mounting.
| Brand | Arisaka Defense |
| Product Type | Offset Optic Mounting Plate |
| Optic Compatibility | Aimpoint Micro T1, T2, H1, H2; SIG Romeo 4, 5 (not 5X); Holosun HS403 (not A), HS503, HS515, HS530 |
| Offset Angle | 35 degrees (standard height); 45 degrees available with taller plate |
| Scope Mount Height Range | 1.5"–1.8" (standard height) |
| Material | 6061-T6 Aluminum |
| Finish | MIL-A-8625 Type III Hard Coat Anodized |
| Base Length | 1.0" |
| Base Height Above Rail | 0.180" |
| Weight | 1.9 oz (base without optic) |
| Rail Mounting | Picatinny; occupies three slots on AR15 top rail |
| Design | Reversible; can be mounted left or right |
| Included | IP20 and IP27 Torx Plus bit drivers |
Yes. Plate 5 is designed for Aimpoint Micro (T1, T2, H1, H2), SIG Romeo 4 and 5 (not 5X), and Holosun HS403 (not A), HS503, HS515, and HS530 red dots. Check your specific optic model before ordering.
Plate 5 works with standard-height scope mounts between 1.5" and 1.8". If your scope mount is taller (1.9" to 2.2"), you'll need a different plate height to maintain proper clearance and co-witness.
Yes. The Arisaka offset base and plates are reversible, so you can mount Plate 5 on the left or right side of your AR15's top rail depending on your setup.
Plate 5 is sold separately or as a combination with the Arisaka offset optic base. If you already own the base, you can purchase the plate alone. The modular design also lets you swap plates later as your optic collection grows.
SKU: 114461118 • Width: 4in • Height: 0.3in • Depth: 5in • Weight: 0.06oz
Availability: In Stock
The Arisaka Offset Optic Plate 5 for Aimpoint is a precision mounting solution designed for shooters running Aimpoint Micro (T1, T2, H1, H2) red dots, SIG Romeo 4 and 5, or Holosun HS403, HS503, HS515, and HS530 optics on AR15s with magnified scopes. This modular plate pairs with the Arisaka Defense offset optic base to mount your red dot at either 35 or 45 degrees, positioning your backup or co-witness optic where you need it—without the bulk or the backup battery drain of a permanent one-sight setup.
Built from 6061-T6 aluminum and MIL-spec hard coat anodized, Plate 5 is engineered for the durability your rifle demands. Whether you're setting up a precision DMR, a hunting rifle with a primary scope, or a duty carbine, this plate lets you keep your red dot accessible without compromising sight picture through your primary optic. The 35-degree angle works with standard-height scope mounts (1.5" to 1.8"); the modular design means you can upgrade plates later if your optic collection grows.
The base and plates are sold separately or together, so you can build your offset setup piece by piece or swap plates as your gear evolves. CNC machined and hard anodized for zero wobble, the Arisaka system maintains the lower 1/3 co-witness height that keeps you in the fight when canting the rifle, and the plates are reversible for left or right side mounting.
| Brand | Arisaka Defense |
| Product Type | Offset Optic Mounting Plate |
| Optic Compatibility | Aimpoint Micro T1, T2, H1, H2; SIG Romeo 4, 5 (not 5X); Holosun HS403 (not A), HS503, HS515, HS530 |
| Offset Angle | 35 degrees (standard height); 45 degrees available with taller plate |
| Scope Mount Height Range | 1.5"–1.8" (standard height) |
| Material | 6061-T6 Aluminum |
| Finish | MIL-A-8625 Type III Hard Coat Anodized |
| Base Length | 1.0" |
| Base Height Above Rail | 0.180" |
| Weight | 1.9 oz (base without optic) |
| Rail Mounting | Picatinny; occupies three slots on AR15 top rail |
| Design | Reversible; can be mounted left or right |
| Included | IP20 and IP27 Torx Plus bit drivers |
Yes. Plate 5 is designed for Aimpoint Micro (T1, T2, H1, H2), SIG Romeo 4 and 5 (not 5X), and Holosun HS403 (not A), HS503, HS515, and HS530 red dots. Check your specific optic model before ordering.
Plate 5 works with standard-height scope mounts between 1.5" and 1.8". If your scope mount is taller (1.9" to 2.2"), you'll need a different plate height to maintain proper clearance and co-witness.
Yes. The Arisaka offset base and plates are reversible, so you can mount Plate 5 on the left or right side of your AR15's top rail depending on your setup.
Plate 5 is sold separately or as a combination with the Arisaka offset optic base. If you already own the base, you can purchase the plate alone. The modular design also lets you swap plates later as your optic collection grows.
SKU: 114461118 • Width: 4in • Height: 0.3in • Depth: 5in • Weight: 0.06oz