Area 419167523235
Area419 419-Alk-Qd Area 419 Arcalock Qd Clamp$120.00
Loading...
Loading...
Loading...
Availability: In Stock
The Area 419 Arcalock Clamp in Gold is a mechanically locking rail clamp purpose-built for modern precision rifle setups using ARCA dovetail rails. If you've watched a barricade stop creep under pressure on a standard friction-based ARCA rail, you understand the real-world problem this clamp solves: the Arcalock system replaces friction-only contact with positive mechanical detents that keep your gun locked in place when you need it most.
What sets this clamp apart is its dual-stage screw design—a smart engineering solution that gives you rapid clamp movement during setup (coarse 16 TPI threads) then automatically engages finer 32 TPI threads under tension for locked-down holding power. That means roughly a quarter-turn to release and reposition on an Arcalock rail, or one full turn to completely remove the clamp. The moving side is dovetailed on both sides to eliminate tilt, and the knob design prevents accidental disassembly even if you over-loosen it.
The clamp mounts directly to Atlas Bipods (QD and NC models) using factory hardware, or to Harris Bipods with a Picatinny adapter. A barricade stop can ride on the clamp independently or nest between the clamp and your bipod. For maximum flexibility, the clamp remains backward-compatible with standard ARCA rails if you remove the three pins—giving you infinite sliding adjustment when you're not using a dedicated Arcalock rail. All hardware is machined in-house from 6061-T6 aluminum and 303 stainless steel, with Type III hardcoat black anodizing on the body and gold anodizing on the knob.
At 72.5 grams, it's a precision instrument for shooters who demand repeatable positioning without creep—whether you're holding a barricade during practice, shooting from bags in the field, or building a tricked-out precision rifle platform.
| Brand | Area 419 |
| Model | Arcalock Clamp Gold |
| Material | 6061-T6 Aluminum (clamp and knob), 303 Stainless Steel (screw) |
| Finish | Type III Hardcoat Black anodize (clamp), Gold anodize (knob) |
| Weight | 72.5 grams |
| Rail Compatibility | ARCA/1.5" dovetail rails; Arcalock rails with detents; standard ARCA rails (backward compatible) |
| Bipod Compatibility | Atlas Bipods (QD and NC models with factory hardware); Harris Bipods (with Picatinny adapter) |
| Screw Design | Two-stage: 16 TPI (coarse) for fast movement, 32 TPI (fine) for locking torque |
| Engagement | ~1/4 turn to release from Arcalock detents; 1 full turn to remove clamp |
The Arcalock Clamp uses positive mechanical detents machined into compatible Arcalock rails, replacing friction-only pressure with locked-in holding power. It won't creep under recoil or pressure like a friction-based clamp can. On standard ARCA rails, you can remove the three pins and it functions as a backward-compatible friction clamp with infinite adjustment.
Yes. It bolts directly to Atlas Bipods (QD and NC models) using their factory hardware. Harris Bipods require a Picatinny/1913 adapter, which is available. A barricade stop can mount standalone on the clamp or nest between the clamp and your bipod.
The two-stage screw design makes it quick. About a quarter-turn releases the clamp from Arcalock rail detents so you can slide it to a new position. One full turn completely removes the clamp from the rail.
Yes. Remove the three pins from the clamp and it's fully backward compatible with standard ARCA/1.5" dovetail rails, functioning as a friction-based clamp with infinite sliding adjustment.
SKU: 167523233 • Width: 4in • Height: 1in • Depth: 6.5in • Weight: 0.19oz
Availability: In Stock
The Area 419 Arcalock Clamp in Gold is a mechanically locking rail clamp purpose-built for modern precision rifle setups using ARCA dovetail rails. If you've watched a barricade stop creep under pressure on a standard friction-based ARCA rail, you understand the real-world problem this clamp solves: the Arcalock system replaces friction-only contact with positive mechanical detents that keep your gun locked in place when you need it most.
What sets this clamp apart is its dual-stage screw design—a smart engineering solution that gives you rapid clamp movement during setup (coarse 16 TPI threads) then automatically engages finer 32 TPI threads under tension for locked-down holding power. That means roughly a quarter-turn to release and reposition on an Arcalock rail, or one full turn to completely remove the clamp. The moving side is dovetailed on both sides to eliminate tilt, and the knob design prevents accidental disassembly even if you over-loosen it.
The clamp mounts directly to Atlas Bipods (QD and NC models) using factory hardware, or to Harris Bipods with a Picatinny adapter. A barricade stop can ride on the clamp independently or nest between the clamp and your bipod. For maximum flexibility, the clamp remains backward-compatible with standard ARCA rails if you remove the three pins—giving you infinite sliding adjustment when you're not using a dedicated Arcalock rail. All hardware is machined in-house from 6061-T6 aluminum and 303 stainless steel, with Type III hardcoat black anodizing on the body and gold anodizing on the knob.
At 72.5 grams, it's a precision instrument for shooters who demand repeatable positioning without creep—whether you're holding a barricade during practice, shooting from bags in the field, or building a tricked-out precision rifle platform.
| Brand | Area 419 |
| Model | Arcalock Clamp Gold |
| Material | 6061-T6 Aluminum (clamp and knob), 303 Stainless Steel (screw) |
| Finish | Type III Hardcoat Black anodize (clamp), Gold anodize (knob) |
| Weight | 72.5 grams |
| Rail Compatibility | ARCA/1.5" dovetail rails; Arcalock rails with detents; standard ARCA rails (backward compatible) |
| Bipod Compatibility | Atlas Bipods (QD and NC models with factory hardware); Harris Bipods (with Picatinny adapter) |
| Screw Design | Two-stage: 16 TPI (coarse) for fast movement, 32 TPI (fine) for locking torque |
| Engagement | ~1/4 turn to release from Arcalock detents; 1 full turn to remove clamp |
The Arcalock Clamp uses positive mechanical detents machined into compatible Arcalock rails, replacing friction-only pressure with locked-in holding power. It won't creep under recoil or pressure like a friction-based clamp can. On standard ARCA rails, you can remove the three pins and it functions as a backward-compatible friction clamp with infinite adjustment.
Yes. It bolts directly to Atlas Bipods (QD and NC models) using their factory hardware. Harris Bipods require a Picatinny/1913 adapter, which is available. A barricade stop can mount standalone on the clamp or nest between the clamp and your bipod.
The two-stage screw design makes it quick. About a quarter-turn releases the clamp from Arcalock rail detents so you can slide it to a new position. One full turn completely removes the clamp from the rail.
Yes. Remove the three pins from the clamp and it's fully backward compatible with standard ARCA/1.5" dovetail rails, functioning as a friction-based clamp with infinite sliding adjustment.
SKU: 167523233 • Width: 4in • Height: 1in • Depth: 6.5in • Weight: 0.19oz