$106.25
Loading...
Loading...
Loading...
Availability: In Stock
The Area 419 Tikka T3 SA 1913 scope rail is a precision scope base built for shooters who refuse to compromise on quality or fit. Area 419 engineered this rail in-house from 7075 aluminum to deliver the accuracy and durability that factory bases often lack. If you're mounting a scope on a Tikka T3 or T3X and want a base that's machined to tight tolerances and finished with attention to detail, this is it.
Every edge matters when you're stacking optics on a precision rifle. Area 419 radiuses all sharp corners and chamfers necessary edges—not for looks alone, but to eliminate snag points and ensure smooth, reliable operation. The Picatinny slots themselves are radiused, and the lugs are contoured to prevent catching on anything during installation or field use. You get a MIL-STD-1913 Type III hardcoat black anodized finish that stands up to hard use.
The 20 MOA elevation built into the rail opens up longer-range capability without eating up adjustment turret rotation on scopes that lack elevation range. Since the MOA angle is machined true to spec using advanced fixturing, you can trust the geometry. All fasteners are T10 Torx screws of matching length—no mixing up hardware or second-guessing installation. The included stainless recoil pin works with receivers that have a hole for it; if yours doesn't, the rail functions fine without it. A T10 Torx key ships with the base, and the recommended torque spec is 15 in/lb.
| Brand | Area 419 |
| Fits | Tikka T3 and T3X |
| Material | 7075 Aluminum |
| Finish | Hardcoat Black Anodize |
| Picatinny Standard | MIL-STD-1913 Type III |
| MOA | 20 |
| Fastener Type | T10 Torx |
| Recommended Torque | 15 in/lb |
| Includes | Stainless recoil pin, T10 Torx key |
This Area 419 rail is designed for the Tikka T3 and T3X action. It mounts directly to the receiver's existing Picatinny slots.
The 20 MOA elevation built into the rail angles your scope upward, giving you more turret adjustment available for long-range shooting without maxing out your scope's internal elevation. This is especially useful for long-range hunting or precision target work where you need extra adjustment room.
You get the scope rail, a stainless recoil pin, and a T10 Torx key for installation. The rail is ready to mount once you torque the fasteners to 15 in/lb.
The stainless recoil pin is included and works with receivers that have a hole for it. If your Tikka doesn't have that hole, the rail functions normally without it.
SKU: 167523246 • Width: 3.625in • Height: 1in • Depth: 9.25in • Weight: 0.18oz
Availability: In Stock
The Area 419 Tikka T3 SA 1913 scope rail is a precision scope base built for shooters who refuse to compromise on quality or fit. Area 419 engineered this rail in-house from 7075 aluminum to deliver the accuracy and durability that factory bases often lack. If you're mounting a scope on a Tikka T3 or T3X and want a base that's machined to tight tolerances and finished with attention to detail, this is it.
Every edge matters when you're stacking optics on a precision rifle. Area 419 radiuses all sharp corners and chamfers necessary edges—not for looks alone, but to eliminate snag points and ensure smooth, reliable operation. The Picatinny slots themselves are radiused, and the lugs are contoured to prevent catching on anything during installation or field use. You get a MIL-STD-1913 Type III hardcoat black anodized finish that stands up to hard use.
The 20 MOA elevation built into the rail opens up longer-range capability without eating up adjustment turret rotation on scopes that lack elevation range. Since the MOA angle is machined true to spec using advanced fixturing, you can trust the geometry. All fasteners are T10 Torx screws of matching length—no mixing up hardware or second-guessing installation. The included stainless recoil pin works with receivers that have a hole for it; if yours doesn't, the rail functions fine without it. A T10 Torx key ships with the base, and the recommended torque spec is 15 in/lb.
| Brand | Area 419 |
| Fits | Tikka T3 and T3X |
| Material | 7075 Aluminum |
| Finish | Hardcoat Black Anodize |
| Picatinny Standard | MIL-STD-1913 Type III |
| MOA | 20 |
| Fastener Type | T10 Torx |
| Recommended Torque | 15 in/lb |
| Includes | Stainless recoil pin, T10 Torx key |
This Area 419 rail is designed for the Tikka T3 and T3X action. It mounts directly to the receiver's existing Picatinny slots.
The 20 MOA elevation built into the rail angles your scope upward, giving you more turret adjustment available for long-range shooting without maxing out your scope's internal elevation. This is especially useful for long-range hunting or precision target work where you need extra adjustment room.
You get the scope rail, a stainless recoil pin, and a T10 Torx key for installation. The rail is ready to mount once you torque the fasteners to 15 in/lb.
The stainless recoil pin is included and works with receivers that have a hole for it. If your Tikka doesn't have that hole, the rail functions normally without it.
SKU: 167523246 • Width: 3.625in • Height: 1in • Depth: 9.25in • Weight: 0.18oz