$100.00
Availability: In Stock
The Area 419 CZ455 1913 Improved Scope Rail is a precision-engineered base built for serious rimfire shooters who demand rock-solid optic mounting on their CZ455 rifles. Unlike traditional dovetail bases that can shift over time, this single-piece 7075 aluminum rail clamps down with consistent force across its entire length, ensuring your scope stays locked in place shot after shot. The 30 MOA cant is purpose-built for long-range .22 LR shooting—perfect if you're stretching shots past 300 yards and need that extra elevation to make distance without maxing out your scope's internal adjustments.
Area 419 machined this rail in-house on their Haas VF4SS to eliminate the typical problems plaguing rimfire scope bases. A mechanical recoil lug at the rear provides a hard stop, while the clamping system delivers the torque consistency you need in a precision firearm. The rail sits roughly half an inch taller than set-screw alternatives, but that's by design—it gives you real estate to move your optic forward, which matters when you're running higher magnification glass on a compact rimfire stock. Pair it with lower-profile rings and you'll maintain your natural cheek weld without needing a riser. Type III black hardcoat anodized finish stands up to field use, and Area 419 includes a 2.5mm wrench for proper installation.
A built-in level on the rail's flared exterior helps you stay true in the prone position—a small detail that separates a tool from a finished rig. These rails also work with the CZ 452 (except the American model, which has a different dovetail spec). The solid center design means no through-hole, giving you a clean, uninterrupted mounting surface.
| Brand | Area 419 |
| Product Type | Scope Rail / Base |
| Material | 7075 Aluminum (T-series) |
| Finish | Type III Black Hardcoat Anodize |
| Cant | 30 MOA |
| Mount Type | 1913 Picatinny |
| Dovetail Compatibility | CZ455 11mm Dovetail |
| Height Addition | Approximately 0.5 inches |
| Recommended Clamp Torque | 22 in/lb (2.5 NM) |
| Included Accessories | 2.5mm Hex Wrench |
Yes, the Area 419 rail is compatible with the CZ452—with one exception. If you own a CZ452 American, it uses a different dovetail profile and won't work with this rail. All other CZ452 models will fit.
The rail adds approximately half an inch of height above the dovetail. While taller than traditional set-screw bases, you can achieve a proper cheek weld by using lower-profile scope rings, which will also give you better bore clearance.
No. The rail is a base only and does not include scope rings. You'll need to source rings separately to mount your optic. The rail comes with a 2.5mm hex wrench for clamping the base to your CZ455 dovetail.
The 30 MOA upward tilt is designed specifically for long-range .22 LR shooting. If you're pushing shots out to 300+ yards, the cant lets you dial in those distances without running out of internal elevation adjustment on your scope.
SKU: 167521419 • Width: 3.5in • Height: 1in • Depth: 9.25in • Weight: 0.18oz
Availability: In Stock
The Area 419 CZ455 1913 Improved Scope Rail is a precision-engineered base built for serious rimfire shooters who demand rock-solid optic mounting on their CZ455 rifles. Unlike traditional dovetail bases that can shift over time, this single-piece 7075 aluminum rail clamps down with consistent force across its entire length, ensuring your scope stays locked in place shot after shot. The 30 MOA cant is purpose-built for long-range .22 LR shooting—perfect if you're stretching shots past 300 yards and need that extra elevation to make distance without maxing out your scope's internal adjustments.
Area 419 machined this rail in-house on their Haas VF4SS to eliminate the typical problems plaguing rimfire scope bases. A mechanical recoil lug at the rear provides a hard stop, while the clamping system delivers the torque consistency you need in a precision firearm. The rail sits roughly half an inch taller than set-screw alternatives, but that's by design—it gives you real estate to move your optic forward, which matters when you're running higher magnification glass on a compact rimfire stock. Pair it with lower-profile rings and you'll maintain your natural cheek weld without needing a riser. Type III black hardcoat anodized finish stands up to field use, and Area 419 includes a 2.5mm wrench for proper installation.
A built-in level on the rail's flared exterior helps you stay true in the prone position—a small detail that separates a tool from a finished rig. These rails also work with the CZ 452 (except the American model, which has a different dovetail spec). The solid center design means no through-hole, giving you a clean, uninterrupted mounting surface.
| Brand | Area 419 |
| Product Type | Scope Rail / Base |
| Material | 7075 Aluminum (T-series) |
| Finish | Type III Black Hardcoat Anodize |
| Cant | 30 MOA |
| Mount Type | 1913 Picatinny |
| Dovetail Compatibility | CZ455 11mm Dovetail |
| Height Addition | Approximately 0.5 inches |
| Recommended Clamp Torque | 22 in/lb (2.5 NM) |
| Included Accessories | 2.5mm Hex Wrench |
Yes, the Area 419 rail is compatible with the CZ452—with one exception. If you own a CZ452 American, it uses a different dovetail profile and won't work with this rail. All other CZ452 models will fit.
The rail adds approximately half an inch of height above the dovetail. While taller than traditional set-screw bases, you can achieve a proper cheek weld by using lower-profile scope rings, which will also give you better bore clearance.
No. The rail is a base only and does not include scope rings. You'll need to source rings separately to mount your optic. The rail comes with a 2.5mm hex wrench for clamping the base to your CZ455 dovetail.
The 30 MOA upward tilt is designed specifically for long-range .22 LR shooting. If you're pushing shots out to 300+ yards, the cant lets you dial in those distances without running out of internal elevation adjustment on your scope.
SKU: 167521419 • Width: 3.5in • Height: 1in • Depth: 9.25in • Weight: 0.18oz