Area 419167522354
Area 419 Tactical One-Piece Scope Mount 35Mm Diam 39Mm Height 20 Moa$330.00
Availability: In Stock
The Area 419 Tactical One-Piece Scope Mount is a precision 35mm ring system built for shooters who demand rock-solid optic mounting on tactical or precision rifles. This American-made, one-piece design eliminates the weak point of traditional two-piece bases—the gap between them—giving you a rigid platform that won't shift under recoil. At 39mm in height with 0 MOA inclination, it's engineered to work with modern rifle configurations and compatible mounting rails without adding unnecessary elevation bias.
Built from 7075 aluminum and CNC-milled to tight tolerances, the Area 419 mount uses raw aluminum precision-bored scope contact surfaces to grip your scope rings with maximum bite. The scope contact surfaces are final-bored as matched sets and never fully disassembled after boring, meaning each mount maintains the dimensional consistency you need for repeatable, zero-holding performance. Steel guide pins between the base and top cap keep everything in perfect alignment during installation and handling.
This mount isn't just rigid—it's also thoughtfully designed for real-world use. Separate rail clamping bars maximize purchase on your Picatinny rail, while inset clamping feet preserve rail real estate for your backup iron sights, night vision mounts, or other tactical accessories. Custom nitrided stainless steel hardware resists corrosion and seizing. A small Picatinny section on the front cap adds flexibility for mounting lights, lasers, or other gear where you need it.
Whether you're running a long-range hunting setup, a precision match rifle, or a tactical carbine, the Area 419 Tactical mount is built to stay put through rough handling and hard shooting.
| Ring Diameter | 35mm |
| Mount Height | 39mm |
| Inclination | 0 MOA |
| Material | 7075 Aluminum (CNC-milled) |
| Hardware | Custom nitrided stainless steel |
| Design | One-piece integral mount |
| Made In | USA |
Yes. The Area 419 Tactical mount is designed with 0 MOA inclination to work directly on modern flat-top and Picatinny rail systems without adding elevation bias.
Yes. The inset clamping feet design preserves rail real estate, so you can mount backup sights forward or behind the scope mount on your Picatinny rail.
This is a 35mm ring system. Make sure your scope has a 35mm main tube diameter. It is not compatible with 30mm or 34mm scopes.
The Area 419 Tactical mount sits 39mm in height, measured from the rail to the top of the rings. This height works with standard scope objectives and most modern optic configurations.
SKU: 167522327 • Width: 6in • Height: 2.6in • Depth: 9.5in • Weight: 1.635oz
Availability: In Stock
The Area 419 Tactical One-Piece Scope Mount is a precision 35mm ring system built for shooters who demand rock-solid optic mounting on tactical or precision rifles. This American-made, one-piece design eliminates the weak point of traditional two-piece bases—the gap between them—giving you a rigid platform that won't shift under recoil. At 39mm in height with 0 MOA inclination, it's engineered to work with modern rifle configurations and compatible mounting rails without adding unnecessary elevation bias.
Built from 7075 aluminum and CNC-milled to tight tolerances, the Area 419 mount uses raw aluminum precision-bored scope contact surfaces to grip your scope rings with maximum bite. The scope contact surfaces are final-bored as matched sets and never fully disassembled after boring, meaning each mount maintains the dimensional consistency you need for repeatable, zero-holding performance. Steel guide pins between the base and top cap keep everything in perfect alignment during installation and handling.
This mount isn't just rigid—it's also thoughtfully designed for real-world use. Separate rail clamping bars maximize purchase on your Picatinny rail, while inset clamping feet preserve rail real estate for your backup iron sights, night vision mounts, or other tactical accessories. Custom nitrided stainless steel hardware resists corrosion and seizing. A small Picatinny section on the front cap adds flexibility for mounting lights, lasers, or other gear where you need it.
Whether you're running a long-range hunting setup, a precision match rifle, or a tactical carbine, the Area 419 Tactical mount is built to stay put through rough handling and hard shooting.
| Ring Diameter | 35mm |
| Mount Height | 39mm |
| Inclination | 0 MOA |
| Material | 7075 Aluminum (CNC-milled) |
| Hardware | Custom nitrided stainless steel |
| Design | One-piece integral mount |
| Made In | USA |
Yes. The Area 419 Tactical mount is designed with 0 MOA inclination to work directly on modern flat-top and Picatinny rail systems without adding elevation bias.
Yes. The inset clamping feet design preserves rail real estate, so you can mount backup sights forward or behind the scope mount on your Picatinny rail.
This is a 35mm ring system. Make sure your scope has a 35mm main tube diameter. It is not compatible with 30mm or 34mm scopes.
The Area 419 Tactical mount sits 39mm in height, measured from the rail to the top of the rings. This height works with standard scope objectives and most modern optic configurations.
SKU: 167522327 • Width: 6in • Height: 2.6in • Depth: 9.5in • Weight: 1.635oz