$350.00
Availability: In Stock
The Area 419 Full Cantilever One Piece Scope Mount in 35mm diameter and 39mm height delivers precision engineering built for shooters who demand reliability over shortcuts. This American-made aluminum mount uses a single-piece cantilever design—the traditional AR-style geometry that's proven in field conditions—with a manufacturing process that sets it apart from typical scope mounts. Area 419 doesn't just assemble and ship; every mount is final-bored as a matched set after anodizing, ensuring your rings grip your optic with consistency and true alignment that standard production methods can't match.
Built from 7075 aluminum and finished with raw internal surfaces, the mount's precision-bored ring contact areas maximize grip without relying on excess clamping force. The design incorporates separate rail clamping bars for a secure, stable hold on your rifle's Picatinny rail, while steel guide pins between base and caps maintain alignment through assembly and use. At 8–9 oz, the mount balances durability with weight discipline—no unnecessary bulk, just the material needed to do the job right. Custom nitrided stainless hardware and inset clamping feet preserve rail utility and give you flexibility in how you configure your setup.
This is the kind of mount built for hunters and shooters who run demanding setups—long-range precision rifles, hunting rigs that see hard use, and AR platforms where repeatability matters. If you're tired of watching scope mounts settle or shift after a few range sessions, Area 419's obsessive final-boring process exists specifically to solve that problem.
| Tube Diameter | 35mm |
| Mount Height | 39mm (1.54″) |
| MOA Offset | 0 MOA |
| Design | Full cantilever, one-piece |
| Material | 7075 aluminum (raw internals) |
| Rail Interface | Picatinny |
| Weight | 8–9 oz per mount |
| Origin | CNC machined in America |
| Hardware | Custom nitrided stainless steel |
This mount is designed for 35mm diameter optics and mounts to standard Picatinny rails via separate clamping bars. Verify that your rifle has a Picatinny rail and that your scope uses a 35mm tube before purchasing.
After anodizing and full assembly, Area 419 machines the rings while they're mounted together on a precision fixture, then never disassembles them. This process ensures the two rings are bored in perfect alignment relative to each other, eliminating tolerance stack-up and delivering exceptional repeatability and optic security that you can't get from rings bored individually.
This one-piece cantilever design integrates the rings and base as a single rigid structure, reducing potential movement or settling that can occur when bases and rings are bolted together separately. The 39mm height is designed in the traditional AR-style cantilever geometry, proven for flat-top and Picatinny-railed platforms.
Yes. The precision-bored design and matched-set manufacturing are built to support optics on demanding setups where repeatability and rock-solid zero retention are critical. The raw aluminum internal surfaces and separate clamping bars work together to lock your scope in place through recoil and environmental stress.
SKU: 167522333 • Width: 5.75in • Height: 2.75in • Depth: 9.75in • Weight: 1.62oz
Availability: In Stock
The Area 419 Full Cantilever One Piece Scope Mount in 35mm diameter and 39mm height delivers precision engineering built for shooters who demand reliability over shortcuts. This American-made aluminum mount uses a single-piece cantilever design—the traditional AR-style geometry that's proven in field conditions—with a manufacturing process that sets it apart from typical scope mounts. Area 419 doesn't just assemble and ship; every mount is final-bored as a matched set after anodizing, ensuring your rings grip your optic with consistency and true alignment that standard production methods can't match.
Built from 7075 aluminum and finished with raw internal surfaces, the mount's precision-bored ring contact areas maximize grip without relying on excess clamping force. The design incorporates separate rail clamping bars for a secure, stable hold on your rifle's Picatinny rail, while steel guide pins between base and caps maintain alignment through assembly and use. At 8–9 oz, the mount balances durability with weight discipline—no unnecessary bulk, just the material needed to do the job right. Custom nitrided stainless hardware and inset clamping feet preserve rail utility and give you flexibility in how you configure your setup.
This is the kind of mount built for hunters and shooters who run demanding setups—long-range precision rifles, hunting rigs that see hard use, and AR platforms where repeatability matters. If you're tired of watching scope mounts settle or shift after a few range sessions, Area 419's obsessive final-boring process exists specifically to solve that problem.
| Tube Diameter | 35mm |
| Mount Height | 39mm (1.54″) |
| MOA Offset | 0 MOA |
| Design | Full cantilever, one-piece |
| Material | 7075 aluminum (raw internals) |
| Rail Interface | Picatinny |
| Weight | 8–9 oz per mount |
| Origin | CNC machined in America |
| Hardware | Custom nitrided stainless steel |
This mount is designed for 35mm diameter optics and mounts to standard Picatinny rails via separate clamping bars. Verify that your rifle has a Picatinny rail and that your scope uses a 35mm tube before purchasing.
After anodizing and full assembly, Area 419 machines the rings while they're mounted together on a precision fixture, then never disassembles them. This process ensures the two rings are bored in perfect alignment relative to each other, eliminating tolerance stack-up and delivering exceptional repeatability and optic security that you can't get from rings bored individually.
This one-piece cantilever design integrates the rings and base as a single rigid structure, reducing potential movement or settling that can occur when bases and rings are bolted together separately. The 39mm height is designed in the traditional AR-style cantilever geometry, proven for flat-top and Picatinny-railed platforms.
Yes. The precision-bored design and matched-set manufacturing are built to support optics on demanding setups where repeatability and rock-solid zero retention are critical. The raw aluminum internal surfaces and separate clamping bars work together to lock your scope in place through recoil and environmental stress.
SKU: 167522333 • Width: 5.75in • Height: 2.75in • Depth: 9.75in • Weight: 1.62oz