$100.00
Availability: In Stock
The Area 419 Rem 700SA 1913 Improved Scope Rail is a precision picatinny base built for shooters who demand fit and finish as much as function. Area 419 manufactures this rail in-house on a 4-axis CNC, machining every surface to exacting tolerances and hand-finishing details that matter: radiused edges between slots, chamfered corners, and a recoil lug integral to the base that locks against the front receiver ring to eliminate shift under recoil. This is the foundation your scope mount needs, whether you're running a long-range hunter, a precision rifle, or a tactical build on a Remington 700 short action.
Machined from 7075 aluminum and finished in Type III hardcoat black anodize, the rail is built to MIL-STD-1913 spec with the 30 MOA angle already baked in—useful for high-power and extreme-distance shooting on rifles that benefit from elevation bias. All mating surfaces are 1:1 surface-machined to the exact profile of the Remington action, ensuring zero guesswork and zero daylight between base and receiver. The ejection port cut blends seamlessly into the action, leaving plenty of clearance for top-loading ADL-pattern rifles.
This is a full-slotted design, meaning it works with any standard picatinny scope mount—including heavy-hitters like Spuhr and MPA—that use a center recoil lug. The rail comes with (4) size-#6 and (4) size-#8 Torx T10 screws, a wrench, and torque specs for both: 15 in/lb for #6, 20 in/lb for #8. No hunting through your spare parts box to figure out which screw goes where.
Important: This rail is compatible with Bergara Premier actions only if your serial number prefix is G00000 or higher (Remington pattern with 8-40 holes). Serial numbers A00000–F00000 indicate a round action with a hood over the recoil lug and will not accept this rail.
| Manufacturer | Area 419 |
| Product Type | Picatinny Scope Rail / Base |
| Fit | Remington 700 Short Action |
| Rail Standard | MIL-STD-1913 Picatinny |
| MOA | 30 MOA |
| Material | 7075 Aluminum |
| Finish | Type III Hardcoat Black Anodize |
| Screws Included | (4) #6-48 Torx T10 and (4) #8-40 Torx T10 |
| #6 Screw Torque | 15 in/lb |
| #8 Screw Torque | 20 in/lb |
| Accessories Included | Torx T10 wrench |
This rail is designed for Remington 700 short action receivers. If you're using a Bergara Premier, compatibility depends on your serial number: G00000 and higher (Remington pattern, 8-40 holes) will accept this rail. Serial numbers A00000–F00000 have a round action with a hood over the recoil lug and are not compatible.
This is a full-slotted picatinny base compatible with any standard MIL-STD-1913 scope mount, including Spuhr, MPA, and other brands that use a center-mounted recoil lug.
The rail ships with (4) #6-48 and (4) #8-40 Torx T10 screws, a Torx T10 wrench, and torque specifications for installation (15 in/lb for #6 screws, 20 in/lb for #8).
The 30 MOA angle is a factory-set feature for long-range and extreme-distance shooting, where the elevation bias reduces the amount of vertical adjustment needed in your scope. This is useful on precision and match rifles running extended-range applications. The angle is guaranteed true to spec thanks to Area 419's advanced fixturing.
SKU: 167522355 • Width: 3.625in • Height: 1in • Depth: 9.25in • Weight: 0.19oz
Availability: In Stock
The Area 419 Rem 700SA 1913 Improved Scope Rail is a precision picatinny base built for shooters who demand fit and finish as much as function. Area 419 manufactures this rail in-house on a 4-axis CNC, machining every surface to exacting tolerances and hand-finishing details that matter: radiused edges between slots, chamfered corners, and a recoil lug integral to the base that locks against the front receiver ring to eliminate shift under recoil. This is the foundation your scope mount needs, whether you're running a long-range hunter, a precision rifle, or a tactical build on a Remington 700 short action.
Machined from 7075 aluminum and finished in Type III hardcoat black anodize, the rail is built to MIL-STD-1913 spec with the 30 MOA angle already baked in—useful for high-power and extreme-distance shooting on rifles that benefit from elevation bias. All mating surfaces are 1:1 surface-machined to the exact profile of the Remington action, ensuring zero guesswork and zero daylight between base and receiver. The ejection port cut blends seamlessly into the action, leaving plenty of clearance for top-loading ADL-pattern rifles.
This is a full-slotted design, meaning it works with any standard picatinny scope mount—including heavy-hitters like Spuhr and MPA—that use a center recoil lug. The rail comes with (4) size-#6 and (4) size-#8 Torx T10 screws, a wrench, and torque specs for both: 15 in/lb for #6, 20 in/lb for #8. No hunting through your spare parts box to figure out which screw goes where.
Important: This rail is compatible with Bergara Premier actions only if your serial number prefix is G00000 or higher (Remington pattern with 8-40 holes). Serial numbers A00000–F00000 indicate a round action with a hood over the recoil lug and will not accept this rail.
| Manufacturer | Area 419 |
| Product Type | Picatinny Scope Rail / Base |
| Fit | Remington 700 Short Action |
| Rail Standard | MIL-STD-1913 Picatinny |
| MOA | 30 MOA |
| Material | 7075 Aluminum |
| Finish | Type III Hardcoat Black Anodize |
| Screws Included | (4) #6-48 Torx T10 and (4) #8-40 Torx T10 |
| #6 Screw Torque | 15 in/lb |
| #8 Screw Torque | 20 in/lb |
| Accessories Included | Torx T10 wrench |
This rail is designed for Remington 700 short action receivers. If you're using a Bergara Premier, compatibility depends on your serial number: G00000 and higher (Remington pattern, 8-40 holes) will accept this rail. Serial numbers A00000–F00000 have a round action with a hood over the recoil lug and are not compatible.
This is a full-slotted picatinny base compatible with any standard MIL-STD-1913 scope mount, including Spuhr, MPA, and other brands that use a center-mounted recoil lug.
The rail ships with (4) #6-48 and (4) #8-40 Torx T10 screws, a Torx T10 wrench, and torque specifications for installation (15 in/lb for #6 screws, 20 in/lb for #8).
The 30 MOA angle is a factory-set feature for long-range and extreme-distance shooting, where the elevation bias reduces the amount of vertical adjustment needed in your scope. This is useful on precision and match rifles running extended-range applications. The angle is guaranteed true to spec thanks to Area 419's advanced fixturing.
SKU: 167522355 • Width: 3.625in • Height: 1in • Depth: 9.25in • Weight: 0.19oz