Zaffiri167528761
Zps.2 Slide P365 9Mm Optic Cut Sniper Gray$329.99
Availability: In Stock
Current Stock: Out of stock
The Zaffiri Precision ZPS.2 slide for the Sig P365 9mm is a precision-machined aftermarket upgrade that transforms your compact carry gun into a modern optics-ready platform. Built from 17-4 stainless steel with tight tolerances, this optic-cut slide is designed to tighten groups and improve reliability while giving you the flexibility to mount a red dot on one of the most popular EDC pistols on the market. The sniper gray Cerakote finish delivers durability and a refined look that works equally well on the range or in daily carry.
The ZPS.2 comes pre-cut and pre-coated, ready to drop onto your P365 frame—no gunsmithing required. The optic cut is compatible with Shield RMSc, Holosun 407K/507K, and Sig RomeoZero dots, all sharing the same footprint with no rear lugs and slightly lowered front lugs. This universal approach means you have genuine options when choosing your optic without worrying about fitting issues. The slide mounts the dot forward of the factory rear iron sight position, and an optic cover plate is included for safe transport or secure storage when you're running irons only.
Compatibility is straightforward: the ZPS.2 is engineered specifically for the new-style Sig P365 extractor and fits standard P365 frames. It is not compatible with the P365 SAS model. Because this slide ships pre-cut and pre-coated in sniper gray, no further modifications can be made—you're getting a finished, ready-to-install component. For optic mounting, use 6-32 thread screws (which vary by optic) and apply blue Loctite for permanent retention.
This is the kind of upgrade that pays dividends on the range or in a duty rotation: tighter tolerances mean better accuracy, optic-ready means faster target acquisition, and the quality 17-4 stainless construction means years of reliable operation.
| Slide Model | ZPS.2 |
| Material | 17-4 Stainless Steel |
| Caliber/Platform | Sig P365 9mm |
| Length | 5.5 inches |
| Width | 0.86 inch |
| Height | 0.86 inch |
| Weight | 7.3 oz |
| Finish | Sniper Gray Cerakote |
| Optic Cut Compatibility | Shield RMSc, Holosun 407K/507K, Sig RomeoZero |
| Optic Mounting Screws | 6-32 thread (optic-specific) |
| Includes | Optic cover plate |
Yes, the ZPS.2 is designed to fit standard Sig P365 frames and works with the new-style P365 extractor. However, it is not compatible with the P365 SAS model. Installation is straightforward—the slide drops onto your existing frame with no additional modifications needed.
The optic cut is pre-machined for Shield RMSc, Holosun 407K/507K, and Sig RomeoZero red dots. All three share the same footprint with no rear lugs and slightly lowered front lugs, so you have genuine flexibility in choosing your optic. The slide is mounted forward of the factory rear sight location.
The ZPS.2 arrives pre-cut and pre-coated in sniper gray Cerakote, fully finished and ready to install. It includes an optic cover plate for safe storage or transport. No gunsmithing is required. Because it ships pre-coated, no further modifications to the finish can be made after delivery.
Blue Loctite is recommended for proper and permanent optic sight retention. Optic mounting uses 6-32 thread screws, which vary depending on your specific red dot model.
SKU: 167527899 • Weight: 0.5oz
Availability: In Stock
Current Stock: Out of stock
The Zaffiri Precision ZPS.2 slide for the Sig P365 9mm is a precision-machined aftermarket upgrade that transforms your compact carry gun into a modern optics-ready platform. Built from 17-4 stainless steel with tight tolerances, this optic-cut slide is designed to tighten groups and improve reliability while giving you the flexibility to mount a red dot on one of the most popular EDC pistols on the market. The sniper gray Cerakote finish delivers durability and a refined look that works equally well on the range or in daily carry.
The ZPS.2 comes pre-cut and pre-coated, ready to drop onto your P365 frame—no gunsmithing required. The optic cut is compatible with Shield RMSc, Holosun 407K/507K, and Sig RomeoZero dots, all sharing the same footprint with no rear lugs and slightly lowered front lugs. This universal approach means you have genuine options when choosing your optic without worrying about fitting issues. The slide mounts the dot forward of the factory rear iron sight position, and an optic cover plate is included for safe transport or secure storage when you're running irons only.
Compatibility is straightforward: the ZPS.2 is engineered specifically for the new-style Sig P365 extractor and fits standard P365 frames. It is not compatible with the P365 SAS model. Because this slide ships pre-cut and pre-coated in sniper gray, no further modifications can be made—you're getting a finished, ready-to-install component. For optic mounting, use 6-32 thread screws (which vary by optic) and apply blue Loctite for permanent retention.
This is the kind of upgrade that pays dividends on the range or in a duty rotation: tighter tolerances mean better accuracy, optic-ready means faster target acquisition, and the quality 17-4 stainless construction means years of reliable operation.
| Slide Model | ZPS.2 |
| Material | 17-4 Stainless Steel |
| Caliber/Platform | Sig P365 9mm |
| Length | 5.5 inches |
| Width | 0.86 inch |
| Height | 0.86 inch |
| Weight | 7.3 oz |
| Finish | Sniper Gray Cerakote |
| Optic Cut Compatibility | Shield RMSc, Holosun 407K/507K, Sig RomeoZero |
| Optic Mounting Screws | 6-32 thread (optic-specific) |
| Includes | Optic cover plate |
Yes, the ZPS.2 is designed to fit standard Sig P365 frames and works with the new-style P365 extractor. However, it is not compatible with the P365 SAS model. Installation is straightforward—the slide drops onto your existing frame with no additional modifications needed.
The optic cut is pre-machined for Shield RMSc, Holosun 407K/507K, and Sig RomeoZero red dots. All three share the same footprint with no rear lugs and slightly lowered front lugs, so you have genuine flexibility in choosing your optic. The slide is mounted forward of the factory rear sight location.
The ZPS.2 arrives pre-cut and pre-coated in sniper gray Cerakote, fully finished and ready to install. It includes an optic cover plate for safe storage or transport. No gunsmithing is required. Because it ships pre-coated, no further modifications to the finish can be made after delivery.
Blue Loctite is recommended for proper and permanent optic sight retention. Optic mounting uses 6-32 thread screws, which vary depending on your specific red dot model.
SKU: 167527899 • Weight: 0.5oz