Zaffiri167529457
Zps.3 Slide Glock 19 Gen 3 9Mm Optic Ready Od Green$329.99
Availability: In Stock
Current Stock: Out of stock
The Zaffiri Precision ZPS.2 slide for Glock 19 Gen 3 is a precision-machined, optic-ready replacement slide built for shooters who want better accuracy and reliability than factory. Machined from a single piece of 17-4 stainless steel and finished in Magpul OD Green Cerakote, this slide combines rugged durability with clean aesthetics. It's manufactured in Largo, Florida, and comes pre-cut and pre-coated for RMR-footprint red dot optics—no gunsmithing required. Whether you're building a carry gun, a duty pistol, or upgrading an existing Gen 3 frame, this is a serious alternative to factory Glock slides.
The ZPS.2 is designed and tested to fit Glock 19 Gen 3 frames, and is also compatible with Gen 1 and Gen 2 models. It will also work with aftermarket frames including the SCT 19, P80 PFC9, and PSA Dagger. The optic cut accommodates Trijicon RMR, SRO, and Holosun 407C/507C optics, with the mounting position forward of the factory rear sight dovetail—so you keep the dovetail slot for co-witnessing irons if you want them. A black anodized cover plate and mounting screws are included.
One critical note: this slide is not ported and is not compatible with Zaffiri's ported barrels (those fit the ZPS.P and ZPS.4 only). The slide arrives as-is—pre-cut, finished, and ready to install on a compatible frame. Zaffiri recommends blue Loctite on the optic screws and strict adherence to your optic manufacturer's torque spec to prevent movement or damage.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Caliber / Fit | Glock 19 Gen 3 (also Gen 1, Gen 2) |
| Material | 17-4 Stainless Steel (billet) |
| Optic Cut | RMR Footprint (Trijicon RMR/SRO, Holosun 407C/507C) |
| Finish | Magpul OD Green Cerakote |
| Length | 6.75 inches |
| Width | 1.005 inches |
| Height | 0.855 inches |
| Weight | 9.3 oz |
| Porting | Not ported |
| Included | Optic mounting screws, black anodized cover plate |
| Manufacturing | Made in USA (Largo, FL) |
Yes. The ZPS.2 is designed and tested for Glock 19 Gen 3 frames. It is also compatible with Gen 1 and Gen 2 Glock 19 models, as well as aftermarket frames like the SCT 19, P80 PFC9, and PSA Dagger.
The optic cut is sized for Trijicon RMR and SRO, as well as Holosun 407C and 507C. Any optic using the standard RMR footprint will work. The cut is positioned in front of the factory rear sight dovetail, allowing you to co-witness iron sights if desired.
No. This slide is not ported and is not compatible with Zaffiri Precision's ported barrels. Ported barrels are designed for the ZPS.P and ZPS.4 slides only.
The slide comes with optic mounting screws and a black anodized cover plate. You'll need a compatible Glock 19 Gen 3 frame. Zaffiri recommends blue Loctite on the optic screws and that you follow your optic manufacturer's screw torque specifications for proper installation.
SKU: 167529458 • Weight: 0.5oz
Availability: In Stock
Current Stock: Out of stock
The Zaffiri Precision ZPS.2 slide for Glock 19 Gen 3 is a precision-machined, optic-ready replacement slide built for shooters who want better accuracy and reliability than factory. Machined from a single piece of 17-4 stainless steel and finished in Magpul OD Green Cerakote, this slide combines rugged durability with clean aesthetics. It's manufactured in Largo, Florida, and comes pre-cut and pre-coated for RMR-footprint red dot optics—no gunsmithing required. Whether you're building a carry gun, a duty pistol, or upgrading an existing Gen 3 frame, this is a serious alternative to factory Glock slides.
The ZPS.2 is designed and tested to fit Glock 19 Gen 3 frames, and is also compatible with Gen 1 and Gen 2 models. It will also work with aftermarket frames including the SCT 19, P80 PFC9, and PSA Dagger. The optic cut accommodates Trijicon RMR, SRO, and Holosun 407C/507C optics, with the mounting position forward of the factory rear sight dovetail—so you keep the dovetail slot for co-witnessing irons if you want them. A black anodized cover plate and mounting screws are included.
One critical note: this slide is not ported and is not compatible with Zaffiri's ported barrels (those fit the ZPS.P and ZPS.4 only). The slide arrives as-is—pre-cut, finished, and ready to install on a compatible frame. Zaffiri recommends blue Loctite on the optic screws and strict adherence to your optic manufacturer's torque spec to prevent movement or damage.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Caliber / Fit | Glock 19 Gen 3 (also Gen 1, Gen 2) |
| Material | 17-4 Stainless Steel (billet) |
| Optic Cut | RMR Footprint (Trijicon RMR/SRO, Holosun 407C/507C) |
| Finish | Magpul OD Green Cerakote |
| Length | 6.75 inches |
| Width | 1.005 inches |
| Height | 0.855 inches |
| Weight | 9.3 oz |
| Porting | Not ported |
| Included | Optic mounting screws, black anodized cover plate |
| Manufacturing | Made in USA (Largo, FL) |
Yes. The ZPS.2 is designed and tested for Glock 19 Gen 3 frames. It is also compatible with Gen 1 and Gen 2 Glock 19 models, as well as aftermarket frames like the SCT 19, P80 PFC9, and PSA Dagger.
The optic cut is sized for Trijicon RMR and SRO, as well as Holosun 407C and 507C. Any optic using the standard RMR footprint will work. The cut is positioned in front of the factory rear sight dovetail, allowing you to co-witness iron sights if desired.
No. This slide is not ported and is not compatible with Zaffiri Precision's ported barrels. Ported barrels are designed for the ZPS.P and ZPS.4 slides only.
The slide comes with optic mounting screws and a black anodized cover plate. You'll need a compatible Glock 19 Gen 3 frame. Zaffiri recommends blue Loctite on the optic screws and that you follow your optic manufacturer's screw torque specifications for proper installation.
SKU: 167529458 • Weight: 0.5oz