Yankee Hill Machine115746866
YHM SHORT SRX FLASH HIDER 11/16-24$84.75
Loading...
Loading...
Loading...
Availability: In Stock
The Yankee Hill Machine SHORT SRX Muzzle Brake in 11/16-24 thread pitch is a compact recoil reducer built for shooters who want proven flash reduction and recoil management without adding unnecessary length or weight to their rifle. Designed as part of YHM's SRX quick-detach suppressor system, this short muzzle brake uses an internal taper seal that locks your suppressor firmly in place and contains gases while firing—keeping threads clean and eliminating gas buildup that can make removal a chore. It's purpose-built for hunters, precision rifle shooters, and anyone running a suppressor on their centerfire rifle who values both performance and a low-profile aesthetic.
What sets the SRX Short brake apart is its no-fuss design philosophy. There's no shimming, no timing required, and no moving parts to wear or fail. The large taper in front of the threads ensures consistent mounting every time you attach or remove your suppressor. At just 1.6875 inches long and 0.75 inches in diameter, it adds minimal bulk to your setup while delivering the recoil reduction benefits you expect. Machined from 4140 steel and finished in black phosphate, it's built tough enough for serious field work without compromising your rifle's handling.
Keep in mind this muzzle brake must be paired with the YHM SRX Adapter (sold separately) to function as part of the complete SRX system. Once installed on your barrel, it can stay permanently attached, giving you the flexibility to use your suppressor on that rifle whenever you need it. Whether you're dialing in a long-range hunting rig or setting up a do-it-all carbine, the SRX Short brake delivers clean, lightweight mounting with the kind of no-nonsense engineering that works in the field.
| Thread Pitch | 11/16-24 |
| Length | 1.6875 inches |
| Diameter | 0.75 inches |
| Material | 4140 Steel |
| Finish | Black Phosphate |
| Mounting System | YHM SRX Quick-Detach (HUB 1-3/8 x 24 compatible interface) |
The SHORT SRX Muzzle Brake is part of Yankee Hill Machine's SRX suppressor system. It must be paired with the YHM SRX Adapter (YHM-4400) to function. The brake's quick-detach interface is compatible with the industry-standard HUB 1-3/8 x 24 thread specification used in the SRX system.
This model is threaded for 11/16-24. Verify your barrel's thread pitch before ordering. YHM offers the SRX Short brake in other thread sizes (5/8 x 24 and 5/8 x 32) if you need a different fit.
No. The SRX Short brake requires no timing or shimming. The large taper in front of the threads automatically locks your suppressor in place and forms a gas-tight seal each time you attach it. It's designed for repeatable mounting without fuss.
Yes. The brake can be permanently attached to your barrel if you plan to always run a suppressor on that rifle. It's also removable if you need to run the gun unsuppressed, though you'll need a compatible muzzle device in its place.
SKU: 115839962 • Weight: 0.125oz
Availability: In Stock
The Yankee Hill Machine SHORT SRX Muzzle Brake in 11/16-24 thread pitch is a compact recoil reducer built for shooters who want proven flash reduction and recoil management without adding unnecessary length or weight to their rifle. Designed as part of YHM's SRX quick-detach suppressor system, this short muzzle brake uses an internal taper seal that locks your suppressor firmly in place and contains gases while firing—keeping threads clean and eliminating gas buildup that can make removal a chore. It's purpose-built for hunters, precision rifle shooters, and anyone running a suppressor on their centerfire rifle who values both performance and a low-profile aesthetic.
What sets the SRX Short brake apart is its no-fuss design philosophy. There's no shimming, no timing required, and no moving parts to wear or fail. The large taper in front of the threads ensures consistent mounting every time you attach or remove your suppressor. At just 1.6875 inches long and 0.75 inches in diameter, it adds minimal bulk to your setup while delivering the recoil reduction benefits you expect. Machined from 4140 steel and finished in black phosphate, it's built tough enough for serious field work without compromising your rifle's handling.
Keep in mind this muzzle brake must be paired with the YHM SRX Adapter (sold separately) to function as part of the complete SRX system. Once installed on your barrel, it can stay permanently attached, giving you the flexibility to use your suppressor on that rifle whenever you need it. Whether you're dialing in a long-range hunting rig or setting up a do-it-all carbine, the SRX Short brake delivers clean, lightweight mounting with the kind of no-nonsense engineering that works in the field.
| Thread Pitch | 11/16-24 |
| Length | 1.6875 inches |
| Diameter | 0.75 inches |
| Material | 4140 Steel |
| Finish | Black Phosphate |
| Mounting System | YHM SRX Quick-Detach (HUB 1-3/8 x 24 compatible interface) |
The SHORT SRX Muzzle Brake is part of Yankee Hill Machine's SRX suppressor system. It must be paired with the YHM SRX Adapter (YHM-4400) to function. The brake's quick-detach interface is compatible with the industry-standard HUB 1-3/8 x 24 thread specification used in the SRX system.
This model is threaded for 11/16-24. Verify your barrel's thread pitch before ordering. YHM offers the SRX Short brake in other thread sizes (5/8 x 24 and 5/8 x 32) if you need a different fit.
No. The SRX Short brake requires no timing or shimming. The large taper in front of the threads automatically locks your suppressor in place and forms a gas-tight seal each time you attach it. It's designed for repeatable mounting without fuss.
Yes. The brake can be permanently attached to your barrel if you plan to always run a suppressor on that rifle. It's also removable if you need to run the gun unsuppressed, though you'll need a compatible muzzle device in its place.
SKU: 115839962 • Weight: 0.125oz