Yankee Hill Machine152742775
Yhm 10" Rod Kit For Victra-12 Blk$36.75
Availability: In Stock
The Yankee Hill Machine 8" Rod Kit for VICTRA-12 gives you the modular flexibility your suppressor was built for. If you own a VICTRA-12 shotgun suppressor and want to dial in your preferred sound signature and length, these stainless assembly rods are what keep your configuration locked together. YHM designed the VICTRA-12 to break down and reassemble at 12", 10", 8", and 6" lengths—these rods are the hardware that makes that modularity work.
Running an 8" setup strikes a practical balance for most shooters: shorter than the base configuration for easier handling and stowage, but longer than going minimal. Whether you're working a tactical shotgun in tight spaces or want faster target acquisition on the range, the ability to swap rod kits means you're not locked into one length for life. That's the whole appeal of a modular suppressor platform.
These rods are machined from 17-4 stainless steel—a material tough enough to handle the violent cycling of a shotgun suppressor and corrosion-resistant enough to survive wet conditions in the field. They come as a pair, so you've got what you need for a complete 8" assembly. If you already run a VICTRA-12 and want to experiment with shorter configurations, or if you're building out your suppressor for a specific hunting or sport-shooting role, this is the upgrade kit that does it.
| Length | 8" |
| Diameter | .1875" |
| Material | 17-4 Stainless Steel |
| Finish | Natural Stainless |
| Quantity | Pair (2 rods) |
| Compatibility | Yankee Hill Machine VICTRA-12 Modular Shotgun Suppressor |
Yes—these 8" rods are specifically engineered as assembly hardware for the Yankee Hill Machine VICTRA-12 modular shotgun suppressor.
You get a pair of stainless steel rods, which is the complete set needed to assemble your VICTRA-12 at the 8" length.
The VICTRA-12 platform allows you to configure the suppressor at 12", 10", 8", and 6" lengths. To change lengths, you would need the corresponding rod kit for each configuration you want to use.
The rods are manufactured from 17-4 stainless steel, chosen for strength and resistance to corrosion in field conditions.
SKU: 152743220
Availability: In Stock
The Yankee Hill Machine 8" Rod Kit for VICTRA-12 gives you the modular flexibility your suppressor was built for. If you own a VICTRA-12 shotgun suppressor and want to dial in your preferred sound signature and length, these stainless assembly rods are what keep your configuration locked together. YHM designed the VICTRA-12 to break down and reassemble at 12", 10", 8", and 6" lengths—these rods are the hardware that makes that modularity work.
Running an 8" setup strikes a practical balance for most shooters: shorter than the base configuration for easier handling and stowage, but longer than going minimal. Whether you're working a tactical shotgun in tight spaces or want faster target acquisition on the range, the ability to swap rod kits means you're not locked into one length for life. That's the whole appeal of a modular suppressor platform.
These rods are machined from 17-4 stainless steel—a material tough enough to handle the violent cycling of a shotgun suppressor and corrosion-resistant enough to survive wet conditions in the field. They come as a pair, so you've got what you need for a complete 8" assembly. If you already run a VICTRA-12 and want to experiment with shorter configurations, or if you're building out your suppressor for a specific hunting or sport-shooting role, this is the upgrade kit that does it.
| Length | 8" |
| Diameter | .1875" |
| Material | 17-4 Stainless Steel |
| Finish | Natural Stainless |
| Quantity | Pair (2 rods) |
| Compatibility | Yankee Hill Machine VICTRA-12 Modular Shotgun Suppressor |
Yes—these 8" rods are specifically engineered as assembly hardware for the Yankee Hill Machine VICTRA-12 modular shotgun suppressor.
You get a pair of stainless steel rods, which is the complete set needed to assemble your VICTRA-12 at the 8" length.
The VICTRA-12 platform allows you to configure the suppressor at 12", 10", 8", and 6" lengths. To change lengths, you would need the corresponding rod kit for each configuration you want to use.
The rods are manufactured from 17-4 stainless steel, chosen for strength and resistance to corrosion in field conditions.
SKU: 152743220