Yankee Hill Machine126797675
Yankee Hill Machine Company Hub Direct Thread Mt 1/2x28$74.75
Loading...
Loading...
Loading...
Availability: In Stock
The Yankee Hill Machine Co. Hub Direct Thread Mount converts HUB-compatible suppressors to direct-thread mounting, giving you a simpler, more rigid connection to your barrel. If you're running a quality suppressor but want to ditch the quick-detach system for a permanent, rock-solid setup, this mount threads directly onto your barrel—no additional hardware needed. It's built from 17-4PH heat-treated steel with black oxide finish, engineered to handle the demands of centerfire shooting while keeping things lean at just 1.7 oz.
Installation is straightforward: unscrew your existing mount from the suppressor, thread this HUB mount in its place using a 3/4" open-end wrench, and screw the suppressor onto your barrel. The .45 caliber bore means it's suitable for common centerfire cartridges. The direct-thread design eliminates wobble and keeps things compact—useful whether you're running suppressed hunting loads, subsonic range work, or tactical setups where every ounce and inch count.
This is a purpose-built accessory for shooters already invested in HUB-compatible suppressor systems who want the simplicity and reliability of a threaded connection. Verify thread pitch compatibility with your barrel (this mount is 11/16x24) before ordering.
| Manufacturer | Yankee Hill Machine Co |
| Mount Type | Direct Thread |
| Thread Pitch | 11/16x24 |
| Material | 17-4PH Heat Treated Steel |
| Finish | Black Oxide |
| Bore Diameter | .45 caliber |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" Open End Wrench |
This mount is designed for HUB-compatible suppressors. You'll need to verify that your specific suppressor uses the HUB platform before ordering. If your suppressor uses a different mounting system, this won't be compatible.
This mount features 11/16x24 threads. Your barrel must be threaded to this exact pitch for proper installation. Check your barrel's thread specification before purchase—mismatched threads will not fit safely.
You receive the direct-thread mount. Installation requires a 3/4" open-end wrench to remove your existing mount from the suppressor and install this one onto the suppressor body. No additional hardware is needed to thread the assembly onto your barrel.
At 1.7 oz, this mount is designed to be lightweight. Direct-thread mounting is also more compact than quick-detach systems, reducing overall suppressor assembly length compared to QD mounts.
SKU: 126797573 • Weight: 1oz
Availability: In Stock
The Yankee Hill Machine Co. Hub Direct Thread Mount converts HUB-compatible suppressors to direct-thread mounting, giving you a simpler, more rigid connection to your barrel. If you're running a quality suppressor but want to ditch the quick-detach system for a permanent, rock-solid setup, this mount threads directly onto your barrel—no additional hardware needed. It's built from 17-4PH heat-treated steel with black oxide finish, engineered to handle the demands of centerfire shooting while keeping things lean at just 1.7 oz.
Installation is straightforward: unscrew your existing mount from the suppressor, thread this HUB mount in its place using a 3/4" open-end wrench, and screw the suppressor onto your barrel. The .45 caliber bore means it's suitable for common centerfire cartridges. The direct-thread design eliminates wobble and keeps things compact—useful whether you're running suppressed hunting loads, subsonic range work, or tactical setups where every ounce and inch count.
This is a purpose-built accessory for shooters already invested in HUB-compatible suppressor systems who want the simplicity and reliability of a threaded connection. Verify thread pitch compatibility with your barrel (this mount is 11/16x24) before ordering.
| Manufacturer | Yankee Hill Machine Co |
| Mount Type | Direct Thread |
| Thread Pitch | 11/16x24 |
| Material | 17-4PH Heat Treated Steel |
| Finish | Black Oxide |
| Bore Diameter | .45 caliber |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" Open End Wrench |
This mount is designed for HUB-compatible suppressors. You'll need to verify that your specific suppressor uses the HUB platform before ordering. If your suppressor uses a different mounting system, this won't be compatible.
This mount features 11/16x24 threads. Your barrel must be threaded to this exact pitch for proper installation. Check your barrel's thread specification before purchase—mismatched threads will not fit safely.
You receive the direct-thread mount. Installation requires a 3/4" open-end wrench to remove your existing mount from the suppressor and install this one onto the suppressor body. No additional hardware is needed to thread the assembly onto your barrel.
At 1.7 oz, this mount is designed to be lightweight. Direct-thread mounting is also more compact than quick-detach systems, reducing overall suppressor assembly length compared to QD mounts.
SKU: 126797573 • Weight: 1oz