$109.99
Availability: In Stock
The XS Sights R3d 2.0 night sights for Smith & Wesson M&P Full Size deliver the brightness and contrast you need for fast target acquisition in dim light and darkness. Built on the proven second-generation R3D platform, these sights combine a tritium-powered front sight with a dedicated low-light rear sight, giving you a combat-ready sight picture whether you're training at dusk, conducting low-light drills, or carrying your M&P for personal defense. If you've run first-gen R3D sights, you'll notice the 2.0 generation requires 50% less installation force—a practical upgrade that makes front-sight replacement or initial setup less of a ordeal.
The dual-illuminated front sight uses both tritium and photoluminescent material, so it glows on its own at night and charges under ambient light. The orange glow dot gives you high contrast against the blacked-out serrated rear sight, which is engineered to cut glint and eliminate distraction downrange. That serrated rear edge also doubles as a ledge for one-handed slide manipulations—a feature that comes in handy when you need to chamber a round or clear a malfunction with one hand on the gun and one occupied elsewhere.
XS Sights built these for EDC durability. The black nitride finish resists corrosion and wear, and the whole assembly is engineered to handle years of carry and use without losing zero or performance. Installation is straightforward for a competent gunsmith or DIY tinkerer with the right punch and a vise block; XS Sights specs the lower installation force, so you're not fighting the gun.
| Brand | XS Sights |
| Model | R3d 2.0 |
| Fits | Smith & Wesson M&P Full Size (not Optic Ready) |
| Front Sight Illumination | Tritium and photoluminescent |
| Sight Configuration | Dual-illuminated front / serrated blacked-out rear |
| Front Sight Glow Color | Orange |
| Finish | Black nitride |
| Installation Difficulty | DIY-friendly; 50% less force than R3D Gen 1 |
These sights are cut for the Smith & Wesson M&P Full Size frame. They are not compatible with Optic Ready M&P models. Verify your slide configuration before purchase; if you have an optics-cut slide, these sights will not function as intended.
Yes. The front sight uses tritium, which glows continuously without any external power source. Tritium requires no battery, charging, or activation—it self-illuminates for the life of the tritium capsule. The photoluminescent material also absorbs ambient light and glows at night, so you get dual glow on the front sight.
Installation requires a front-sight punch, a rear-sight tool or punch, and a solid vise block or gunsmith press. The R3d 2.0 requires 50% less installation force than the original R3D, which makes DIY installation more feasible if you have the right tools and a secure way to hold the slide. If you're not confident, have a gunsmith handle it.
The blacked-out rear sight eliminates glint and light reflection that can distract your eye or give away your position in low light. The serrated edge also provides a tactile ledge for one-handed slide manipulations, so you can chamber a round or clear a malfunction with one hand while the other is occupied—a practical asset in a defensive scenario.
SKU: 121685375 • Width: 5in • Height: 1in • Depth: 8.1in • Weight: 0.19oz
Availability: In Stock
The XS Sights R3d 2.0 night sights for Smith & Wesson M&P Full Size deliver the brightness and contrast you need for fast target acquisition in dim light and darkness. Built on the proven second-generation R3D platform, these sights combine a tritium-powered front sight with a dedicated low-light rear sight, giving you a combat-ready sight picture whether you're training at dusk, conducting low-light drills, or carrying your M&P for personal defense. If you've run first-gen R3D sights, you'll notice the 2.0 generation requires 50% less installation force—a practical upgrade that makes front-sight replacement or initial setup less of a ordeal.
The dual-illuminated front sight uses both tritium and photoluminescent material, so it glows on its own at night and charges under ambient light. The orange glow dot gives you high contrast against the blacked-out serrated rear sight, which is engineered to cut glint and eliminate distraction downrange. That serrated rear edge also doubles as a ledge for one-handed slide manipulations—a feature that comes in handy when you need to chamber a round or clear a malfunction with one hand on the gun and one occupied elsewhere.
XS Sights built these for EDC durability. The black nitride finish resists corrosion and wear, and the whole assembly is engineered to handle years of carry and use without losing zero or performance. Installation is straightforward for a competent gunsmith or DIY tinkerer with the right punch and a vise block; XS Sights specs the lower installation force, so you're not fighting the gun.
| Brand | XS Sights |
| Model | R3d 2.0 |
| Fits | Smith & Wesson M&P Full Size (not Optic Ready) |
| Front Sight Illumination | Tritium and photoluminescent |
| Sight Configuration | Dual-illuminated front / serrated blacked-out rear |
| Front Sight Glow Color | Orange |
| Finish | Black nitride |
| Installation Difficulty | DIY-friendly; 50% less force than R3D Gen 1 |
These sights are cut for the Smith & Wesson M&P Full Size frame. They are not compatible with Optic Ready M&P models. Verify your slide configuration before purchase; if you have an optics-cut slide, these sights will not function as intended.
Yes. The front sight uses tritium, which glows continuously without any external power source. Tritium requires no battery, charging, or activation—it self-illuminates for the life of the tritium capsule. The photoluminescent material also absorbs ambient light and glows at night, so you get dual glow on the front sight.
Installation requires a front-sight punch, a rear-sight tool or punch, and a solid vise block or gunsmith press. The R3d 2.0 requires 50% less installation force than the original R3D, which makes DIY installation more feasible if you have the right tools and a secure way to hold the slide. If you're not confident, have a gunsmith handle it.
The blacked-out rear sight eliminates glint and light reflection that can distract your eye or give away your position in low light. The serrated edge also provides a tactile ledge for one-handed slide manipulations, so you can chamber a round or clear a malfunction with one hand while the other is occupied—a practical asset in a defensive scenario.
SKU: 121685375 • Width: 5in • Height: 1in • Depth: 8.1in • Weight: 0.19oz