L.E. Wilson194197660
Wilson Stainless Case Trimmer Kit with Micro-Adjust Stop .50 Cal wtih 50 BMG Case Holder$268.40
Availability: In Stock
The L.E. Wilson .50 BMG case trimmer kit is purpose-built for reloaders who work with large-format rifle brass, especially the demanding .50 BMG cartridge. If you're processing fired cases for reload and need repeatable, precise trimming—whether you're working with .50 BMG, .338 Lapua, .300 Win Mag, or smaller rifle calibers down to 6mm—this kit delivers the consistency that separates quality handloads from mediocre ones. The system uses a case holder that mimics a rifle chamber, supporting your fired brass the way it was designed to sit, which means truer trimming and less chatter.
What makes this kit stand out is the micro-adjust stop mechanism. Rather than guessing trim length or relying on crude mechanical stops, you dial in your exact specification and repeat it, shot after shot. For a reloader serious about precision—whether that's long-range match shooting, precision hunting, or simply respecting the craft—that repeatability matters. The stainless construction handles the rigors of consistent use, and the included trimmer stand and case holder clamp keep everything stable and indexed during the trimming process.
This is a complete kit: you get the trimmer head with TiN cutter, the .50 BMG-specific case holder, the stand, the clamp, and the micrometer stop assembly. The longer base design accommodates magnum and large cases without cramping. Whether you're a dedicated .50 BMG shooter or a general precision reloader who occasionally processes larger brass, this kit handles the full range from 6mm to .50 caliber.
| Brand | L.E. Wilson |
| Product Type | Case Trimmer Kit |
| Caliber Range | 6mm to .50 BMG |
| Primary Caliber | .50 BMG |
| Cutter Material | TiN Coated |
| Body Material | Stainless Steel |
| Key Feature | Micro-Adjust Stop (Micrometer) |
| Included Components | Trimmer head, .50 BMG case holder, stand, case holder clamp, micrometer stop |
Yes. The L.E. Wilson trimmer kit handles any caliber from 6mm up to .50 BMG. You'll need the appropriate case holder for smaller cartridges (the kit includes the .50 BMG holder), but the trimmer head and stand work across the entire range.
The micrometer stop lets you dial in your exact desired trim length once, then repeat that measurement precisely for every case. No guessing, no variation—critical for reloaders who demand tight tolerances and repeatable results.
The complete kit includes the case trimmer head with TiN cutter, a .50 BMG case holder, the trimmer stand, a case holder clamp, and the micrometer stop assembly. You have everything needed to begin trimming large-format rifle brass.
The case holder is designed to support fired brass the way a rifle chamber does, which helps eliminate misalignment and chatter during trimming. This produces truer, more consistent results compared to generic collet-style holders.
SKU: 194198695 • Width: 4.5in • Height: 3.25in • Depth: 8.75in • Weight: 2.8oz
Availability: In Stock
The L.E. Wilson .50 BMG case trimmer kit is purpose-built for reloaders who work with large-format rifle brass, especially the demanding .50 BMG cartridge. If you're processing fired cases for reload and need repeatable, precise trimming—whether you're working with .50 BMG, .338 Lapua, .300 Win Mag, or smaller rifle calibers down to 6mm—this kit delivers the consistency that separates quality handloads from mediocre ones. The system uses a case holder that mimics a rifle chamber, supporting your fired brass the way it was designed to sit, which means truer trimming and less chatter.
What makes this kit stand out is the micro-adjust stop mechanism. Rather than guessing trim length or relying on crude mechanical stops, you dial in your exact specification and repeat it, shot after shot. For a reloader serious about precision—whether that's long-range match shooting, precision hunting, or simply respecting the craft—that repeatability matters. The stainless construction handles the rigors of consistent use, and the included trimmer stand and case holder clamp keep everything stable and indexed during the trimming process.
This is a complete kit: you get the trimmer head with TiN cutter, the .50 BMG-specific case holder, the stand, the clamp, and the micrometer stop assembly. The longer base design accommodates magnum and large cases without cramping. Whether you're a dedicated .50 BMG shooter or a general precision reloader who occasionally processes larger brass, this kit handles the full range from 6mm to .50 caliber.
| Brand | L.E. Wilson |
| Product Type | Case Trimmer Kit |
| Caliber Range | 6mm to .50 BMG |
| Primary Caliber | .50 BMG |
| Cutter Material | TiN Coated |
| Body Material | Stainless Steel |
| Key Feature | Micro-Adjust Stop (Micrometer) |
| Included Components | Trimmer head, .50 BMG case holder, stand, case holder clamp, micrometer stop |
Yes. The L.E. Wilson trimmer kit handles any caliber from 6mm up to .50 BMG. You'll need the appropriate case holder for smaller cartridges (the kit includes the .50 BMG holder), but the trimmer head and stand work across the entire range.
The micrometer stop lets you dial in your exact desired trim length once, then repeat that measurement precisely for every case. No guessing, no variation—critical for reloaders who demand tight tolerances and repeatable results.
The complete kit includes the case trimmer head with TiN cutter, a .50 BMG case holder, the trimmer stand, a case holder clamp, and the micrometer stop assembly. You have everything needed to begin trimming large-format rifle brass.
The case holder is designed to support fired brass the way a rifle chamber does, which helps eliminate misalignment and chatter during trimming. This produces truer, more consistent results compared to generic collet-style holders.
SKU: 194198695 • Width: 4.5in • Height: 3.25in • Depth: 8.75in • Weight: 2.8oz