Wilson Combat115820426
Wilson Combat AR-10 M-LOK Handguard 14.6" 6005A-T5 Aluminum Black Anodized$154.95
Loading...
Loading...
Loading...
Availability: In Stock
The Wilson Combat AR-10 M-Lok handguard delivers lightweight modularity without compromise on strength or shooter comfort. This 12.6" rail brings the proven T.R.I.M. (Tactical Rail Interface, Modular) design to the AR-10 platform, giving you a free-floating handguard that's precision-machined from 6005A-T5 aircraft aluminum and finished in Mil-Spec hard anodize. If you run an AR-10 and want to mount optics, lights, or other accessories without adding unnecessary weight or bulk, this is a purpose-built upgrade that handles serious use while staying sleek enough for fast, dynamic shooting.
Wilson Combat engineered this rail to be among the lightest and strongest in its class. The three, six, and nine o'clock M-Lok positions let you attach gear exactly where you need it, and the system plays well with the broad range of M-Lok accessories already out there. The barrel nut design is carried over from the original T.R.I.M. rail, so swapping an older version for this new M-Lok handguard is straightforward—no surprises. Installation takes about five minutes with common hand tools, and you can remove or replace it in the field if your setup changes.
Build quality reflects Wilson Combat's attention to detail. The barrel attachment nut is machined from hardened 4130 steel and nitrocarburized to resist heat transfer and rotation. The ergonomic profile keeps your hands comfortable during extended shooting, with no sharp edges or abrasive surfaces. Overall weight comes in at 12.2 oz (13.4 oz with attachments), keeping your rifle balanced and handy. The 1.47" internal diameter works with most low-profile gas blocks, giving you flexibility in your gas system choice.
One note during setup: the hardened screws use a tapered base for a flush fit, so apply a small amount of grease to the tapered shoulder before tightening to prevent galling. Once installed, you have a rock-solid platform that won't shift or rattle under recoil.
| Brand | Wilson Combat |
| Product Type | AR-10 Handguard / Rail |
| Length | 12.6" |
| Material | 6005A-T5 Aircraft Aluminum |
| Finish | Mil-Spec Hard Anodized Black |
| Mounting System | M-Lok (3, 6, 9 o'clock positions) |
| Barrel Nut Material | Nitrocarburized 4130 Steel |
| Internal Diameter | 1.47" |
| Weight (bare) | 12.2 oz |
| Weight (with attachments) | 13.4 oz |
| Installation | Approximately 5 minutes with common hand tools |
Yes—this is purpose-built for the AR-10 platform. The 1.47" internal diameter accommodates most low-profile gas blocks commonly used in AR-10 builds.
Yes. Installation takes about five minutes using standard hand tools, and you can remove or swap it in the field if needed. During initial setup, apply a small amount of grease to the tapered shoulder of the screws to prevent galling before tightening.
The three, six, and nine o'clock M-Lok positions accept any standard M-Lok accessory on the market—lights, grips, foregrips, sling mounts, and more. This gives you genuine modularity to customize your setup without proprietary gear.
This version retains the barrel nut design from the original T.R.I.M. rail, so upgrading is simple. The key addition is the M-Lok accessory system, which gives you modern mounting flexibility while keeping the same lightweight, free-floating, precision-machined construction that made the original popular.
SKU: 115673379 • Width: 5.5in • Height: 3.8in • Depth: 17.7in • Weight: 1.4oz
Availability: In Stock
The Wilson Combat AR-10 M-Lok handguard delivers lightweight modularity without compromise on strength or shooter comfort. This 12.6" rail brings the proven T.R.I.M. (Tactical Rail Interface, Modular) design to the AR-10 platform, giving you a free-floating handguard that's precision-machined from 6005A-T5 aircraft aluminum and finished in Mil-Spec hard anodize. If you run an AR-10 and want to mount optics, lights, or other accessories without adding unnecessary weight or bulk, this is a purpose-built upgrade that handles serious use while staying sleek enough for fast, dynamic shooting.
Wilson Combat engineered this rail to be among the lightest and strongest in its class. The three, six, and nine o'clock M-Lok positions let you attach gear exactly where you need it, and the system plays well with the broad range of M-Lok accessories already out there. The barrel nut design is carried over from the original T.R.I.M. rail, so swapping an older version for this new M-Lok handguard is straightforward—no surprises. Installation takes about five minutes with common hand tools, and you can remove or replace it in the field if your setup changes.
Build quality reflects Wilson Combat's attention to detail. The barrel attachment nut is machined from hardened 4130 steel and nitrocarburized to resist heat transfer and rotation. The ergonomic profile keeps your hands comfortable during extended shooting, with no sharp edges or abrasive surfaces. Overall weight comes in at 12.2 oz (13.4 oz with attachments), keeping your rifle balanced and handy. The 1.47" internal diameter works with most low-profile gas blocks, giving you flexibility in your gas system choice.
One note during setup: the hardened screws use a tapered base for a flush fit, so apply a small amount of grease to the tapered shoulder before tightening to prevent galling. Once installed, you have a rock-solid platform that won't shift or rattle under recoil.
| Brand | Wilson Combat |
| Product Type | AR-10 Handguard / Rail |
| Length | 12.6" |
| Material | 6005A-T5 Aircraft Aluminum |
| Finish | Mil-Spec Hard Anodized Black |
| Mounting System | M-Lok (3, 6, 9 o'clock positions) |
| Barrel Nut Material | Nitrocarburized 4130 Steel |
| Internal Diameter | 1.47" |
| Weight (bare) | 12.2 oz |
| Weight (with attachments) | 13.4 oz |
| Installation | Approximately 5 minutes with common hand tools |
Yes—this is purpose-built for the AR-10 platform. The 1.47" internal diameter accommodates most low-profile gas blocks commonly used in AR-10 builds.
Yes. Installation takes about five minutes using standard hand tools, and you can remove or swap it in the field if needed. During initial setup, apply a small amount of grease to the tapered shoulder of the screws to prevent galling before tightening.
The three, six, and nine o'clock M-Lok positions accept any standard M-Lok accessory on the market—lights, grips, foregrips, sling mounts, and more. This gives you genuine modularity to customize your setup without proprietary gear.
This version retains the barrel nut design from the original T.R.I.M. rail, so upgrading is simple. The key addition is the M-Lok accessory system, which gives you modern mounting flexibility while keeping the same lightweight, free-floating, precision-machined construction that made the original popular.
SKU: 115673379 • Width: 5.5in • Height: 3.8in • Depth: 17.7in • Weight: 1.4oz