Wilson Combat115654566
Wilson Combat Shok-Buff Recoil System for 1911 Government .45 ACP$40.95
Availability: In Stock
The Wilson Combat Shok-Buff Recoil Buffer for 1911 Government is a pack of six polyurethane impact pads designed to protect your slide and frame from battering during recoil. If you shoot high-performance loads or put serious rounds downrange, these small but essential components absorb the punishment that comes with magnum ammunition or full-power loads. The Shok-Buff sits between the slide and frame contact points, taking the hit so your pistol's steel doesn't have to.
Built from injection-molded polyurethane, each buffer is a 1/10" thick poly fiber disc engineered to be easily swapped out when it wears. With a lifespan of roughly 1,000 rounds per buffer, a six-pack gives you substantial protection for serious shooters and competitors. Whether you're running a tricked-out competition gun, a carry 1911, or a no-nonsense range beater, these buffers are a proven way to extend the life of your frame and slide where they meet during the recoil cycle.
Wilson Combat's Shok-Buff is simple, effective, and affordable insurance against the cumulative wear that high-round-count shooting inflicts on any 1911. Toss a pack in your range bag or keep spares in your toolbox—when a buffer shows signs of flattening, replacement takes seconds.
| Brand | Wilson Combat |
| Product Type | Recoil Buffer/Impact Pad |
| Caliber/Application | 1911 Government |
| Material | Polyurethane |
| Buffer Thickness | 1/10" |
| Quantity per Pack | 6 |
| Expected Service Life | ~1,000 rounds per buffer |
These buffers are designed for 1911 Government models. They fit between the slide and frame at the contact points where recoil wear occurs. If you own a different 1911 variant, verify compatibility with Wilson Combat or the manufacturer.
Each buffer is rated for approximately 1,000 rounds of shooting. Once a buffer begins to flatten or compress noticeably, swap it out for a fresh one. With six buffers in a pack, you have plenty on hand before needing to reorder.
No. The Shok-Buff buffers are easily replaceable without special tools. Disassembly and reassembly of your 1911 is the only requirement.
Magnum and full-power loads generate more recoil energy. Shok-Buff pads absorb that impact at the slide-to-frame interface, reducing wear, battering, and potential frame damage over time—especially important if you shoot high-round-count sessions or competition.
SKU: 115748762 • Width: 1.4in • Height: 0.3in • Depth: 4.5in • Weight: 0.06oz
Availability: In Stock
The Wilson Combat Shok-Buff Recoil Buffer for 1911 Government is a pack of six polyurethane impact pads designed to protect your slide and frame from battering during recoil. If you shoot high-performance loads or put serious rounds downrange, these small but essential components absorb the punishment that comes with magnum ammunition or full-power loads. The Shok-Buff sits between the slide and frame contact points, taking the hit so your pistol's steel doesn't have to.
Built from injection-molded polyurethane, each buffer is a 1/10" thick poly fiber disc engineered to be easily swapped out when it wears. With a lifespan of roughly 1,000 rounds per buffer, a six-pack gives you substantial protection for serious shooters and competitors. Whether you're running a tricked-out competition gun, a carry 1911, or a no-nonsense range beater, these buffers are a proven way to extend the life of your frame and slide where they meet during the recoil cycle.
Wilson Combat's Shok-Buff is simple, effective, and affordable insurance against the cumulative wear that high-round-count shooting inflicts on any 1911. Toss a pack in your range bag or keep spares in your toolbox—when a buffer shows signs of flattening, replacement takes seconds.
| Brand | Wilson Combat |
| Product Type | Recoil Buffer/Impact Pad |
| Caliber/Application | 1911 Government |
| Material | Polyurethane |
| Buffer Thickness | 1/10" |
| Quantity per Pack | 6 |
| Expected Service Life | ~1,000 rounds per buffer |
These buffers are designed for 1911 Government models. They fit between the slide and frame at the contact points where recoil wear occurs. If you own a different 1911 variant, verify compatibility with Wilson Combat or the manufacturer.
Each buffer is rated for approximately 1,000 rounds of shooting. Once a buffer begins to flatten or compress noticeably, swap it out for a fresh one. With six buffers in a pack, you have plenty on hand before needing to reorder.
No. The Shok-Buff buffers are easily replaceable without special tools. Disassembly and reassembly of your 1911 is the only requirement.
Magnum and full-power loads generate more recoil energy. Shok-Buff pads absorb that impact at the slide-to-frame interface, reducing wear, battering, and potential frame damage over time—especially important if you shoot high-round-count sessions or competition.
SKU: 115748762 • Width: 1.4in • Height: 0.3in • Depth: 4.5in • Weight: 0.06oz