$109.95
Availability: In Stock
The Wheeler 1-Piece Bolt-Action Scope Mount for Savage 10 in 30mm High profile is a solid, no-nonsense mounting solution for hunters and shooters running a mid-to-large diameter scope on a modern bolt-action rifle. This is a single-piece construction—no separate rings and base to worry about—machined from 6061 aluminum for strength without excess weight. If you're setting up a Savage 10 or 110 for hunting or range work, this mount gets your optic level and secure without the fuss of two-piece systems.
The design centers on a six-hole ring pattern that locks your scope tube firmly in place, and Wheeler built in a swing-out anti-cant level so you can dial in a truly level reticle every time. Level scopes matter: cant throws your bullet impact off-axis, and at distance it compounds fast. The high ring height gives you clearance over the receiver for larger objective bells or co-mounted accessories. This mount also comes with 20 MOA of built-in elevation, which is useful if you're shooting long-range and want to maximize your turret adjustment range before cashing in on base angle.
One-piece mounts reduce potential shift issues because there's no gap between base and rings—it's all one rigid chunk of metal. That simplicity appeals to hunters who want to mount a scope, zero it, and trust it'll stay put through seasons of hunting, truck rides, and field use. The 30mm ring diameter accommodates standard 30mm tube scopes, a common middle ground between older 1-inch and the heavier 34mm formats.
| Ring Size | 30mm |
| Ring Height | High |
| Material | 6061 Aluminum |
| Configuration | 1-Piece |
| Rifle Compatibility | Savage 10/110 |
| Built-in Elevation | 20 MOA |
Yes, this Wheeler mount is designed for both Savage 10 and Savage 110 bolt-action rifles. Make sure your scope tube diameter is 30mm, and verify that the mount's drilling pattern aligns with your rifle's receiver holes before ordering.
High rings position your scope further above the receiver. This clearance is valuable if you have a large objective lens, a wide-body scope, or plan to mount accessories like red dots or night vision units in front of or behind the scope. For a standard hunting scope, high rings also give more room to comfortably mount a sling.
The mount has 20 MOA (minutes of angle) of built-in elevation angle, which tips the entire scope forward by that amount. This is mainly useful for long-range shooters who need extra elevation adjustment in the scope's turret to stay on target at extended distances. For typical hunting ranges under 400 yards, it's not critical, but it doesn't hurt and gives you more turret room if you ever shoot further.
This is a one-piece mount—the rings and base are integrated into a single aluminum assembly. One-piece mounts are generally more rigid and have less risk of shift than separate base-and-ring systems, and they're faster to install.
SKU: 197551823 • Width: 3.35in • Height: 1.95in • Depth: 8.55in • Weight: 0.545oz
Availability: In Stock
The Wheeler 1-Piece Bolt-Action Scope Mount for Savage 10 in 30mm High profile is a solid, no-nonsense mounting solution for hunters and shooters running a mid-to-large diameter scope on a modern bolt-action rifle. This is a single-piece construction—no separate rings and base to worry about—machined from 6061 aluminum for strength without excess weight. If you're setting up a Savage 10 or 110 for hunting or range work, this mount gets your optic level and secure without the fuss of two-piece systems.
The design centers on a six-hole ring pattern that locks your scope tube firmly in place, and Wheeler built in a swing-out anti-cant level so you can dial in a truly level reticle every time. Level scopes matter: cant throws your bullet impact off-axis, and at distance it compounds fast. The high ring height gives you clearance over the receiver for larger objective bells or co-mounted accessories. This mount also comes with 20 MOA of built-in elevation, which is useful if you're shooting long-range and want to maximize your turret adjustment range before cashing in on base angle.
One-piece mounts reduce potential shift issues because there's no gap between base and rings—it's all one rigid chunk of metal. That simplicity appeals to hunters who want to mount a scope, zero it, and trust it'll stay put through seasons of hunting, truck rides, and field use. The 30mm ring diameter accommodates standard 30mm tube scopes, a common middle ground between older 1-inch and the heavier 34mm formats.
| Ring Size | 30mm |
| Ring Height | High |
| Material | 6061 Aluminum |
| Configuration | 1-Piece |
| Rifle Compatibility | Savage 10/110 |
| Built-in Elevation | 20 MOA |
Yes, this Wheeler mount is designed for both Savage 10 and Savage 110 bolt-action rifles. Make sure your scope tube diameter is 30mm, and verify that the mount's drilling pattern aligns with your rifle's receiver holes before ordering.
High rings position your scope further above the receiver. This clearance is valuable if you have a large objective lens, a wide-body scope, or plan to mount accessories like red dots or night vision units in front of or behind the scope. For a standard hunting scope, high rings also give more room to comfortably mount a sling.
The mount has 20 MOA (minutes of angle) of built-in elevation angle, which tips the entire scope forward by that amount. This is mainly useful for long-range shooters who need extra elevation adjustment in the scope's turret to stay on target at extended distances. For typical hunting ranges under 400 yards, it's not critical, but it doesn't hurt and gives you more turret room if you ever shoot further.
This is a one-piece mount—the rings and base are integrated into a single aluminum assembly. One-piece mounts are generally more rigid and have less risk of shift than separate base-and-ring systems, and they're faster to install.
SKU: 197551823 • Width: 3.35in • Height: 1.95in • Depth: 8.55in • Weight: 0.545oz