$72.99
Availability: In Stock
The Weaver Tactical 6-Hole Picatinny 30mm rings are purpose-built scope mounts for shooters who demand rock-solid performance on precision rifles. Whether you're setting up a duty rifle, a long-range hunting platform, or a tacticool precision gun, these low-profile rings deliver the clamping security and Picatinny-standard interface that serious operators expect. The six-screw design gives you maximum contact pressure and redundancy—meaning your optic stays put through recoil and rough handling, shot after shot.
Built with Type III hard coat anodized matte finish, these rings are engineered for durability in field conditions. The crossbolt design meets Picatinny specifications (not just Weaver proprietary standards), making them compatible with a broad ecosystem of tactical and precision accessories. Torx screws with anti-slip design eliminate the risk of fasteners backing out under heavy use, and the low-profile footprint keeps your sight line as close to the bore as possible—a real advantage when you're running higher magnification or need a lower cheek weld.
Weaver offers multiple height options to accommodate different barrel profiles and scope bell diameters, so you can dial in the perfect optical axis for your setup. If you're building a dedicated precision rifle, a short-action platform, or upgrading mounts on a favorite hunting rifle, these 30mm rings strike the balance between mil-spec toughness and practical usability. Six screws per ring, Type III hard coat, and Picatinny compliance make this a no-nonsense choice for anyone who trusts their optics to perform.
| Brand | Weaver |
| Ring Diameter | 30mm |
| Mounting System | Picatinny |
| Profile Height | Low Profile |
| Fastener Type | Torx (anti-slip) |
| Finish | Type III Hard Coat Anodized Matte |
| Screw Count Per Ring | Six |
Yes. The Weaver Tactical 6-Hole rings feature a crossbolt design that meets Picatinny specifications, so they'll mount securely to any standard Picatinny rail found on modern precision rifles, modern sporting rifles, and tactical platforms.
Six screws provide extra clamping points and distribute pressure more evenly across the ring body, resulting in more secure retention and reduced risk of the scope shifting during heavy recoil or field use.
Height choice depends on your barrel profile, scope bell diameter, and how close you want your scope to the bore. Weaver offers multiple height options; consult your rifle's specifications and desired cheek weld height to select the right fit.
Torx screws offer better grip and are less prone to stripping. The anti-slip design on these screws reduces the chance of fasteners vibrating loose during shooting or transport, improving long-term reliability and safety.
SKU: 114461453 • Width: 3.3in • Height: 1.2in • Depth: 4.4in • Weight: 0.31oz
Availability: In Stock
The Weaver Tactical 6-Hole Picatinny 30mm rings are purpose-built scope mounts for shooters who demand rock-solid performance on precision rifles. Whether you're setting up a duty rifle, a long-range hunting platform, or a tacticool precision gun, these low-profile rings deliver the clamping security and Picatinny-standard interface that serious operators expect. The six-screw design gives you maximum contact pressure and redundancy—meaning your optic stays put through recoil and rough handling, shot after shot.
Built with Type III hard coat anodized matte finish, these rings are engineered for durability in field conditions. The crossbolt design meets Picatinny specifications (not just Weaver proprietary standards), making them compatible with a broad ecosystem of tactical and precision accessories. Torx screws with anti-slip design eliminate the risk of fasteners backing out under heavy use, and the low-profile footprint keeps your sight line as close to the bore as possible—a real advantage when you're running higher magnification or need a lower cheek weld.
Weaver offers multiple height options to accommodate different barrel profiles and scope bell diameters, so you can dial in the perfect optical axis for your setup. If you're building a dedicated precision rifle, a short-action platform, or upgrading mounts on a favorite hunting rifle, these 30mm rings strike the balance between mil-spec toughness and practical usability. Six screws per ring, Type III hard coat, and Picatinny compliance make this a no-nonsense choice for anyone who trusts their optics to perform.
| Brand | Weaver |
| Ring Diameter | 30mm |
| Mounting System | Picatinny |
| Profile Height | Low Profile |
| Fastener Type | Torx (anti-slip) |
| Finish | Type III Hard Coat Anodized Matte |
| Screw Count Per Ring | Six |
Yes. The Weaver Tactical 6-Hole rings feature a crossbolt design that meets Picatinny specifications, so they'll mount securely to any standard Picatinny rail found on modern precision rifles, modern sporting rifles, and tactical platforms.
Six screws provide extra clamping points and distribute pressure more evenly across the ring body, resulting in more secure retention and reduced risk of the scope shifting during heavy recoil or field use.
Height choice depends on your barrel profile, scope bell diameter, and how close you want your scope to the bore. Weaver offers multiple height options; consult your rifle's specifications and desired cheek weld height to select the right fit.
Torx screws offer better grip and are less prone to stripping. The anti-slip design on these screws reduces the chance of fasteners vibrating loose during shooting or transport, improving long-term reliability and safety.
SKU: 114461453 • Width: 3.3in • Height: 1.2in • Depth: 4.4in • Weight: 0.31oz